Bond-1® SF - Pentron Clinical

Bond -1 SF
®
Solvent-Free
SE Adhesive
A Breakthrough in
Bonding Technology!
Why solvent-free?
Solvents such as acetone, alcohol, or water, are found in all
bonding agents on the market. These solvents can be inadvertent
contributors to weakened bond strengths and post-operative
sensitivity. Bond-1 SF Solvent-Free SE Adhesive helps solve these
What
leading
dentists
are
saying...
common problems and here’s how:
Solution #1
Provide high, consistent bond strengths by
eliminating a step - During routine application
of other bonding agents, an air drying step is
necessary to remove solvents such as water, alcohol, and acetone.
As a result of under drying, and not completely allowing these
solvents to evaporate, residual solvents are left behind, potentially
resulting in weakened, inconsistent bond strengths, and bonding
interface degradation. This factor is especially important to consider
as numerous scientific studies have shown that residual water can
remain in the adhesive layer and lead to “water-treeing.”
Solution #2
“Bond-1® SF cuts direct
composite placement
time in half and helps
eliminate the potential
for post-op sensitivity.”
Protecting against post operative sensitivity
Jeff T. Blank,
- Overdrying can lead to post-operative sensi-
DMD, PA
tivity by leaving the dentin too dry and exposing
the dentin tubules. Likewise, underdrying can leave residual solvent
in the resin, thus irritating nerves within the dentin tubules. By eliminating the solvents from Bond-1 SF, we have eliminated both the
drying step and the need to worry about these common technique
sensitive issues.
Solution #3
Penetration of dentin without solvents –
In the past, bonding agents needed to contain
solvents in order to effectively penetrate dentin
and enamel and provide a strong bond to tooth structure. Bond-1 SF
eliminates that need by forming an interactive bond between the
minerals of the tooth structure and resins, without commonly used
"Solvent-free adhesives
like Bond-1® SF, are the
next evolutionary step in
adhesive dentistry."
solvents such as water, acetone or alcohol.
Gregori M. Kurtzman,
Solvent-free also means no environmentally harmful solvents!
DDS, MAGD, FPFA,
FACD, DICOI
Clinicians have been waiting gener
Pentron Clinical is pleased to bring you its latest breakthrough in
bonding technology — Bond-1® SF Solvent-free SE Adhesive!
Bond-1 SF is so unique, it defies the conventional practice of assigning
“generations” to bonding agents. This solvent-free, one-coat, self-etch
adhesive is in a league of its own!
Call it a “generation” if you must, we just call it an extraordinary
addition to our affordable, award-winning line of adhesive products.
The results are in...
*Bond Strength of Self-Etch Adhesives
Exceptionally High Bond Strength
25
Bond strengths exhibited by Bond-1® SF Solvent-Free
SE Adhesive are as high as results obtained when
third party study by University of Alabama at Birmingham,
Bond-1 SF offers exceptional bond strengths up to
30.4 MPa to Dentin. These exceptionally high bond
strengths ensure long lasting, beautiful direct restorations
Strength in MPa
20
using traditional total etch techniques. Validated in a
15
10
5
for you and your patients.
0
Dentin
Enamel
Bond-1™
SF 1
Clearfil™
S 3 Bond 2
Adper™
Prompt™
L-Pop™ 3
OneCoat
Bond 4
AdheSE ®
One
Viva-Pen 5
G-Bond™ 6
*Bond strength data by W. Jia, S. Jin and J. Turcotte (Pentron Clinical Technologies, LLC, Wallingford CT). Data available upon request. **Microleakage data by J
1. Manufacturer’s published data. 2. Clearfil™ S3 Bond is a trademark of Kuraray Dental. 3. Adper™ Prompt™ L-Pop™ SE Adhesive is a trademark of 3M. 4. O
Posterior restoration using Bond-1 SF Solvent-F
®
1
2
Bo
Preparation of an MOD
direct restoration.
app
tip
sec
rations for a bonding agent like this!
Available in two convenient delivery options
>
Syringe - The syringe offers
>
Single Dose - This easy to
a unique flocked needle tip
use, self-standing delivery
for easy, direct placement
option provides the ultimate
onto the prep. Also includes
in infection control, as it is a
a smear-free UV coated
one-time use only. Separate
label for easy cleaning after
applicator brushes are sup-
each use.
plied with each single dose.
**Microleakage of Self-Etch Adhesives
Low Microleakage
at the University of Alabama-Birmingham, Bond-1® SF
Solvent-Free SE Adhesive showed no significant
difference in microleakage on either dentin or enamel
when compared to 4 other leading competitive bonding
agents. Low microleakage means good marginal integrity
for all your direct composite restorations, bonded with
Bond-1 SF, for years to come.
% of Specimens with dye
penetration ≤ 0.5 of cavity depth
In a study performed by John O. Burgess, DDS, MS
100
80
60
40
20
0
Dentin
Enamel
Bond-1™
SF 1
Clearfil™
S 3 Bond 2
Adper™
Prompt™
L-Pop™ 3
AdheSE ®
One
Viva-Pen 5
G-Bond™ 6
John O. Burgess, University of Alabama-Birmingham. Data available upon request.
OneCoat Bond is a trademark of Coltene/Whaledent. 5. AdheSE® One Viva-Pen is a registered trademark of Ivoclar Vivadent Inc. 6. G-Bond™ is a trademark of GC America Inc.
Free SE Adhesive
3
4
The unique handling
nd-1® SF is being
properties allow for easy
plied with the flocked
detection on the tooth
and rubbed for 20
after application, for
conds.
a consistent bond every
time you use it.
Features & Benefits
> Versatile – Can be used in conjunction with light
> Solvent-free – Protects against sensitivity, eliminating
cure and dual-cure materials*
common technique-sensitive issues such as under
and over drying. Also prevents evaporation.
> Unique handling properties – Enables an even
spread of the material, ensuring a complete coverage
> No air drying – Saves you precious chair time;
and optimal results
doesn’t leave you guessing “how dry is too dry”
> One coat – Easy to use, reduces procedure time
> Self-etch – No need to acid etch, saves time
*Compatible with dual-cure materials only when the initial layer of dual-cure material is light cured.
Just one coat!
Most bonding agents on the market require at least two coats of material in order to obtain optimal results.
Bond-1 SF only requires 1 coat! In just 3 basic* steps you reach optimal bonding results, making this one
of the easiest to use bonding agents on the market. Just apply evenly, rub for 20 seconds, and light cure!
Dip Applicator and
Rub for 20 seconds
Light cure 10 seconds
spread evenly
*See translated instructions for full product use detail
5
Final direct restoration accomplished with the Bond-1® SF
Light cure the bonding
Solvent-Free SE Adhesive,
agent for 10 seconds.
Artiste® Nano Composite,
Artiste® Maverick™ Tints,
and the Fini® Polishing Disks.
Photography courtesy of Gregori Kurtzman, DDS, MAGD, FPFA, FACD, DICOI
Bond-1 SF
®
Solvent-Free
SE Adhesive
Ordering Information
N03N - Bond-1 SF Solvent-Free SE Adhesive - Syringe
2 – 1ml Syringes
Flocked Needle Tips
Instructions and MSDS
N03M - Bond-1 SF Solvent-Free SE Adhesive - Single Dose
50 – .125ml Single Doses
50 – Disposable Applicators*
Instructions and MSDS
Accessories
N03T
100 – 25 gauge Flocked Needle
N10B
100 – Disposable Applicators*
*Note: Green applicators are only available in Bond-1 SF 50 packs, but are the same
size as Pentron’s Blue Disposable Applicator, REF N10B.
For more information on our entire line of innovative dental products
visit us at
www.pentron.com or call us at 1.800.551.0283
53 North Plains Industrial Road | Wallingford, CT 06492
t | 800.551.0283 | 203.265.7397 f | 877.677.8844 w | www.pentron.com
Bond-1® SF | Breeze® | Cement-It® | Lute-It® | Bond-1® | Bond-It® | Nano-Bond®
Copyright © 2009 Pentron Clinical Technologies, LLC
BSFLT_Rev01