Caparol TrimaXX
Transkript
Caparol TrimaXX
DECORATIVE SYNTHETIC PRODUCT RANGE Caparol TrimaXX®Silky Matte® Synthetic Paint PRODUCT DESCRIPTION ® Silicone resin based, wipe clean, half-matte (silky matte ) synthetic interior top coat paint with high covering ability and whiteness which does not contain aromatic solvent and lead, and free of disturbing odors occurring during and after application. PROPERTIES In contrast to all synthetic paints, it does not harm human health in living places during and after application since it contains no aromatic solvent or lead. Thanks to the silicon resin it contains, it is highly wipe clean and performs maximum resistance against yellowing. Provides excellent covering ability and whiteness. Suitable for combing; offers easy application with brush and roller brush since it leaves no brush marks and does not lead to dripping. Forms an excellent surface with chemical additives and silicon resin. Strong slick feeling on contact after drying. Therefore, it provides maximum resistance against dusting and contamination in the course of time. Performs maximum resistance against impacts, scratches and chemical cleaning materials used in houses thanks to the silicone resin it contains. APPLICATION SURFACES It is used together with appropriate primers especially on interior concrete, exposed concrete, plaster, concrete board, plaster board, OSB, MDF, wood and iron-steel-sheet surfaces as a top coat with the purpose of protection and decoration. APPLICATION For wood (massive) surfaces, it should be applied on Caparol Holzimprägniergrund (Wood Impregnate). If ® paste repair is needed, Caparol TriMaXX Synthetic Primer should be applied after the application of Caparol Holzimprägniergrund (Wood Impregnate) and repair work should be carried out with Caparol Synthetic Paste. After paste application, the lining is carried out again with Caparol TriMaXX® Synthetic Primer and afterwards, surface can be painted with Caparol TriMaXX® Silky Matte Synthetic Paint. For newly plastered surfaces, after scraping and sanding operation, Caparol TriMaXX® Synthetic Primer should be used on Alpina Primer or Alpina Paste Primer. For old painted surfaces, surface should be sanded, cleaned of dust and loose-weak layers that are not self-supporting and primed with Caparol TriMaXX® Synthetic Primer. For highly absorbent surfaces and/or surfaces with dusting characteristics (plaster, lime, whitewash, surface that has lost its characteristics, low quality absorbent plastic painted surfaces, gas concrete); it should be applied with our transparent primers (Alpina 1/7 Concentrated Primer, Filli Boya Satin Gypsum Primer) without combing/smoothening (by moving the roller brush on a surface by touring only once) and Caparol TriMaXX Synthetic Primer should be applied. Surfaces prepared in this way should be applied Caparol TriMaXX® Silky Matte Synthetic Paint as 2 coats at the end of drying time of the prime. For iron, steel and sheet surfaces, Caparol TriMaXX® Antirust application should be carried out as 2 coats after necessary cleaning is completed. ® Caparol TriMaXX® Silky Matte Synthetic Paint should be applied on metal surfaces, such as galvanized sheet, aluminum, copper and zinc after Caparol Astarix is applied. Application may be carried out with brush, roller brush or sprayer. Application surface temperature should be between +5℃ and +30℃. For Airless Spraying: Pressure: 120-140 bar Nozzle Angle: 50° Nozzle Dimension (inch): 0.013” Thinning: 10% THINNING In brush and roller brush applications, thin the product with Caparol Synthetic Thinner D at a maximum rate of 5-10%. Note: Product can be thinned technically with Caparol Synthetic Thinner. Since aromatic solvents are minimized in Caparol Synthetic Thinner D, disturbing odors are prevented during and after application. DRY TIME (at 20°C, 65% HR) Dry time to touch: 2-3 hours Hard Dry: 24 hours CONSUMPTION ® During application, an area of 15-20 m can be painted with 1 L of Caparol TriMaXX Silky Matte in one coat depending on the type and absorbency of the material used on surface. (at 25±5 µm dry film thickness). A controlled sample work should be carried out for precise consumption calculation. Filli Boya Counseling Center 444 1 222 FLASH POINT 36ºC STORAGE Can be stored for 1 year at least in its original packaging in a cool and dry place. In order to store the remaining paint in the package (if any) safely, add thinner you have used before until it covers the top of the paint completely or close the cover of the package tightly, turn the lid of the package 180º 1-2 times. PACKAGING 15 Lt, 3.75 Lt, 2.5 Lt HAZARD DESCRIPTIONS Xn Harmful. RISK WARNINGS R 10: Flammable R 65: Harmful: may cause lung damage if swallowed. SECURITY WARNINGS S 1/2: Keep locked up and out of the reach of children. S 13: Keep away from food, drink and animal feeding stuffs. S 20: When using do not eat or drink. S 45: In case of accident or if you feel unwell seek medical advice immediately (show the label where possible). S 46: If swallowed, seek medical advice immediately and show this container or label. S 53: Avoid exposure - obtain special instructions before use. S 56: Dispose of this material and its container at hazardous or special waste collection point. Conforms to TS 39. Type 2 Conforms to G communique. Filli Boya Counseling Center 444 1 222
Benzer belgeler
TDS - Sintaş
Holzimprägniergrund (Wood Impregnate) and repair work should be carried out with Caparol Synthetic Paste.
After paste application, the lining is carried out again with Caparol TriMaXX® Synthetic Pr...