P 1 0 F 2 4 4 2 4 D
Transkript
P 1 0 F 2 4 4 2 4 D
P10 10mm COMPACT valves - threaded body and for sub-base mounting - Low standard power consumption (0,32W): low power consumption electropilot B10 (standard version with LED) - Quick response times - High flow rate: the development of the traditional UNIVER spool technology permits high flow rate values - Compact design: the valve body (10mm) allows reduced overall dimensions - Complete solution - Threaded body (P10F) and body for sub-base (P10B) in the following versions: 5/2 - 5/3 - 3/2+3/2 - External and multipolar electrical connections - TC serial transmission system - Maximum application flexibility - Modular sub-base (single and double) for a high versatility in the composition of the valve manifolds - Simplified installation - Easy installation of tubes and fittings thanks to connections being all on the same side TECHNICAL CHARACTERISTICS Ambient temperature Fluid temperature Fluid Commutation system Ways/Positions Pressure -5 ÷ +50 °C max +50 °C filtered air 10 μm not dehumidified, lubricated or not spool 3/2+3/2, 5/2, 5/3 electric control = max 9 bar pneumatic control = max 10 bar Control indirect electro-pneumatic, pneumatic Return mechanical spring, pneumomechanical spring, pneumatic, electric Connections P10F: M5, M7 P10B: M5, M7, tube Ø 4 Nominal flow rate (Nl/min) 5/2 = 310 5/3 = 230 3/2+3/2 = 250 CONSTRUCTIVE CHARACTERISTICS Valve body Seals Sub-base and actuators Spool zamak nitrile rubber selfestinguishing technopolymer aluminum ELECTRIC CHARACTERISTICS Electropilot Voltage Power consumption Protection degree Manual override B10 24 V DC (± 10%) holding 0,32 W, pick-up 5,5 W (25 ms) IP65 button with tool CODIFICATION KEY 1 0 F 1 2 4 4 2 3 4 1 Series 4 5 2 Type P10F = threaded valve P10B = valve for base 4 Return 12 2 = 5/2 3 = 5/3 c.c. 4 = 5/3 o.c. 5 = 5/3 p.c. 6 = 3/2+3/2 NC-NC 7 = 3/2+3/2 NC-NO 8 = 3/2+3/2 NO-NO 5 Voltage 0 = pneumomechanical spring 1 = mechanical spring 3 = pneumatic amplified 4 = elettric amplified o.c. = open centres 2 24 = 24 V DC c.c. = closed centres 5 D 6 3 Control 14 3 = pneumatic amplified 4 = electric amplified COMPACT valves P 6 Variant D = external servo-assistance of the pilot on valve body (P10 = M3) p.c. = pressurized centres 5_3 P10F 10 mm COMPACT, M5 threaded connections UNIVER GROUP Single electric impulse A Weight (Kg): Symbol Control electric amplified 5/2 Return pneumo mechanical spring Pressure Times (ms) bar En. De-en. 1,5÷9 12 20 0,054 Part no. P10F24024 A Manual override electric amplified 5/2 mechanical spring 1,9÷9 10 21 P10F24124 Double electric impulse A Weight (Kg): Symbol Control electric amplified 5/2 2 - 4 = Use 14 = Control 12 = Return Return electric amplified Pressure Times (ms) bar En. De-en. 0,7÷9 10 10 0,069 Part no. P10F24424 A Manual override 5/3 c.c. electric amplified electric amplified 1,5÷9 11 22 P10F34424 5/3 o.c. electric amplified electric amplified 1,5÷9 11 22 P10F44424 5/3 p.c. electric amplified electric amplified 1,5÷9 11 22 P10F54424 3/2 NC + 3/2 NC electric amplified electric amplified 1,3÷9 9 14 P10F64424 3/2 NC + 3/2 NO electric amplified electric amplified 1,3÷9 9 14 P10F74424 3/2 NO + 3/2 NO electric amplified electric amplified 1,3÷9 9 14 P10F84424 o.c. = open centres 5_4 c.c. = closed centres p.c. = pressurized centres 2 - 4 = Use 14 = Control 12 = Return A P10F 10 mm COMPACT, M5 threaded connections UNIVER GROUP Single electric impulse Weight (Kg): Symbol Control pneumatic amplified 5/2 pneumatic amplified 5/2 Return Pressure 0,042 Times (ms) bar En. De-en. pneumo mechanical spring 1,5÷10 8 14 mechanical spring 1,9÷10 Part no. P10F230 2 - 4 = Use 14 = Control 12 = Return 7 16 P10F231 Double electric impulse Weight (Kg): Control Return Pressure 0,044 Times (ms) bar En. Part no. De-en. 5/2 pneumatic amplified pneumatic amplified 0,6÷10 6 6 P10F233 5/3 c.c. pneumatic amplified pneumatic amplified 1,5÷10 7 20 P10F333 5/3 o.c. pneumatic amplified pneumatic amplified 1,5÷10 7 20 P10F433 5/3 p.c. pneumatic amplified pneumatic amplified 1,5÷10 7 20 P10F533 3/2 NC + 3/2 NC pneumatic amplified pneumatic amplified 1,3÷10 8 14 P10F633 3/2 NC + 3/2 NO pneumatic amplified pneumatic amplified 1,3÷10 8 14 P10F733 3/2 NO + 3/2 NO pneumatic amplified pneumatic amplified 1,3÷10 8 14 P10F833 o.c. = open centres c.c. = closed centres 2 - 4 = Use 14 = Control 12 = Return 5 COMPACT valves Symbol p.c. = pressurized centres 5_5 P10SF 10 mm COMPACT, M5 threaded connections UNIVER GROUP Integrated electric connection A 6 B 8 5 1 7 2 4 1 2 3 4 5 6 7 8 End plate Sub-base 1 place Sub-base 2 place Modular tie-rods Valve Multipolar female connector Bus connection card Multipole connection module 1 = Supply port 2 - 4 = Use 3 - 5 = Exhaust 14 = Control 12 = Return 3 1 A Manual override B Tightening torque G1/8 = max 3 Nm N = Number of valve places TIM1024 P10SF100 P10SF110 P10SF200 P10SF210 P10SF500 connection module 25 poles male type D-sub weight: 0,047 Kg sub-base 1 place weight: 0,018 Kg sub-base 1 place 1-3-5 closed weight: 0,02 Kg sub-base 2 places weight: 0,04 Kg sub-base 2 places 1-3-5 closed weight: 0,04 Kg supply plate G1/8 left for TIM module weight: 0,04 Kg P10SF505 P10SF550 P10SF560 P10SF570 P10SS14**M P10SS12**M supply plate G1/8 right weight: 0,04 Kg supply pressure separator plate weight: 0,002 Kg covering plate for unused valve place weight: 0,003 Kg intermediate supply plate for threaded version weight: 0,004 Kg bus connection card, side 14 ** = 04, 06, 08, 10, 12 places weight: 0,006 Kg bus connection card, side 12 ** = 04, 06, 08, 10, 12 places weight: 0,006 Kg P10STR01 P10STR02 P10STR05 modular tie-rods 1 valve place (package100 pcs.) weight: 0,001 Kg modular tie-rods 2 valve places (package100 pcs.) weight: 0,003 Kg modular tie-rods 5 valve places (package100 pcs.) weight: 0,007 Kg AZ4-SN003A 5_6 100 nuts M3 for tie-rods AZ4-VN0310 100 screws for tie-rods P10SF 10 mm COMPACT, M5 threaded connections UNIVER GROUP Electric connection with external connector A B 6 5 1 3 4 1 2 3 4 5 6 End plate Sub-base 1 place Sub-base 2 place Modular tie-rods Valve Single connection 1 2 1 = Supply port 2 - 4 = Use 3 - 5 = Exhaust 14 = Control 12 = Return A Manual override B Tightening torque G1/8 = max 3 Nm N = Number of valve places P10SF300 P10SF310 P10SF400 P10SF410 P10SF515 P10SF550 sub-base 1 place weight: 0,011 Kg sub-base 1 place 1-3-5 closed weight: 0,013 Kg sub-base 2 places weight: 0,024 Kg sub-base 2 places 1-3-5 closed weight: 0,026 supply place G1/8 right/left weight: 0,032 Kg supply pressure separator plate weight: 0,003 Kg P10SF560 P10SF570 P10STR01 P10STR02 P10STR05 covering plate for unused valve place weight: 0,003 Kg AZ4-SN003A intermediate supply plate for threaded version weight: 0,004 Kg modular tie-rods 1 valve place (package100 pcs.) weight: 0,001 Kg modular tie-rods 2 valve places (package100 pcs.) weight: 0,003 Kg modular tie-rods 5 valve places (package100 pcs.) weight: 0,007 Kg COMPACT valves 5 100 nuts for tie-rods AZ4-VN0310 100 screws for tie-rods 5_7 P10B 10 mm Compact for sub-base mounting UNIVER GROUP Single electric impulse A Weight (Kg): Symbol Control Return 5/2 electric amplified pneumo mechanical spring 5/2 electric amplified mechanical spring Pressure Times (ms) bar En. De-en. 1,5÷9 12 20 0,054 Part no. P10B24024 A Manual override 14 = Control 12 = Return 1,9÷9 10 21 P10B24124 Double electric impulse A Weight (Kg): Symbol Return Pressure Times (ms) bar En. De-en. 0,069 Part no. 5/2 electric amplified electric amplified 0,7÷9 10 10 P10B24424 5/3 c.c. electric amplified electric amplified 1,5÷9 11 22 P10B34424 5/3 o.c. electric amplified electric amplified 1,5÷9 11 22 P10B44424 5/3 p.c. electric amplified electric amplified 1,5÷9 11 22 P10B54424 3/2 NC + 3/2 NC electric amplified electric amplified 1,3÷9 9 14 P10B64424 3/2 NC + 3/2 NO electric amplified electric amplified 1,3÷9 9 14 P10B74424 3/2 NO + 3/2 NO electric amplified electric amplified 1,3÷9 9 14 P10B84424 o.c. = open centres 5_8 Control c.c. = closed centres p.c. = pressurized centres A A Manual override 14 = Control 12 = Return P10B 10 mm Compact for sub-base mounting UNIVER GROUP Single pneumatic impulse Weight (Kg): Symbol Control Return Pressure 0,042 Times (ms) bar En. De-en. Part no. 5/2 pneumatic amplified pneumo mechanical spring 1,5÷9 8 14 P10B230 5/2 pneumatic amplified mechanical spring 1,9÷9 7 16 P10B231 14 = Control 12 = Return Double pneumatic impulse Weight (Kg): Control Return Pressure 0,044 Times (ms) bar En. Part no. 14 = Control 12 = Return De-en. 5/2 pneumatic amplified pneumatic amplified 0,6÷9 6 6 P10B233 5/3 c.c. pneumatic amplified pneumatic amplified 1,5÷9 7 20 P10B333 5/3 o.c. pneumatic amplified pneumatic amplified 1,5÷9 7 20 P10B433 5/3 p.c. pneumatic amplified pneumatic amplified 1,5÷9 7 20 P10B533 3/2 NC + 3/2 NC pneumatic amplified pneumatic amplified 1,3÷9 8 14 P10B633 3/2 NC + 3/2 NO pneumatic amplified pneumatic amplified 1,3÷9 8 14 P10B733 3/2 NO + 3/2 NO pneumatic amplified pneumatic amplified 1,3÷9 8 14 P10B833 o.c. = open centres c.c. = closed centres 5 COMPACT valves Symbol p.c. = pressurized centres 5_9 P10SB 10 mm Compact for sub-base mounting UNIVER GROUP Integrated electric connection A B 6 8 5 1 3 4 1 2 3 4 5 6 7 8 End plate Sub-base 1 place Sub-base 2 places Modular tie-rods Valve Multipolar female connector Bus connection card Multipole connection module 2 7 A Manual override B Tightening torque G1/8 - M5= max 3 Nm M7 = 2 Nm 1 = Supply port 2 - 4 = Use 3 - 5 = Exhaust 14 = Control 12 = Return 1 N = Number of valve places TIM1024 P10SB100/107 P10SB110/117 P10SB200/207 P10SB210/217 P10SB304 P10SB314 connection module 25 poles male type D-sub weight: 0,047 Kg sub-base 1 place side outlets M5, M7 weight: 0,031 Kg sub-base 1 place side outlets M5, M7 1-3-5 closed weight: 0,033 Kg sub-base 2 places side outlets M5, M7 weight: 0,062 Kg sub-base 2 places side outlets M5, M7 1-3-5 closed weight: 0,067 Kg sub-base 1 place side outlets with quick couplings pipe 4 weight: 0,034 Kg sub-base 1 place side outlets with quick couplings pipe 4 1-3-5 closed weight: 0,034 Kg P10SB404 P10SB414 P10SB500 P10SB505 P10SB550 P10SB560 P10SB570 sub-base 2 places side outlets with quick couplings pipe 4 weight: 0,073 Kg sub-base 1 place side outlets with quick couplings pipe 4 1-3-5 closed weight: 0,068 Kg supply plate G1/8 left for TIM module weight: 0,074 Kg supply plate G1/8 right weight: 0,074 Kg supply pressure separator plate weight: 0,004 Kg covering plate for unused valve place weight: 0,002 Kg intermediate supply plate for sub-base weight: 0,007 Kg P10SS14**M P10SS12**M P10STR01 P10STR02 P10STR05 AZ4-SN003A 100 nuts for tie-rods bus connection card, side 14 bus connection card,side 12 ** = 04, 06, 08, 10, 12 places ** = 04, 06, 08, 10, 12 places weight: 0,006 Kg weight: 0,006 Kg 5_10 modular tie-rods 1 valve place (package100 pcs.) weight: 0,001 Kg modular tie-rods 2 valve places (package100 pcs.) weight: 0,003 Kg modular tie-rods 5 valve places (package100 pcs.) weight: 0,007 Kg AZ4-VN0310 100 screws for tie-rods Flying connectors/Chart for the connections UNIVER GROUP TSCFN24S000 D-535U40300 D-535U40500 single connector with cable 3-5 m TSCFN24S0300 TSCFN24S0500 TSCFN24S1000 female connector 25 poles type D-sub no cable M3 x 8 fixing screws female connector 25 poles type sub-D cable 3-5-10 m M3 x 8 fixing screws TSCFN16D0300 TSCFN16D0500 TSCFN16D1000 flying male/female connector sub D (upon request) prewired for 24 coils with cable Ø 8 mm (3-5-10 m lenght) suitable for mobile laying M3 x 8 fixing screws Colour identification according to standard DIN 47100 Female D-SUB 25 poles for connection12+12 coils PIN No. Colour Coil Control side ValveN° 1 white 1 14 1 2 brown 2 12 1 3 green 3 14 2 4 yellow 4 12 2 5 grey 5 14 3 6 pink 6 12 3 7 blue 7 14 4 8 red 8 12 4 9 nero 9 14 5 10 black 10 12 5 11 grey-pink 11 14 6 12 red-blue 12 12 6 13 white-green 13 14 7 14 brown-green 14 12 7 15 white-yellow 15 14 8 16 yellow-brown 16 12 8 17 white-grey 17 14 9 18 grey-brown 18 12 9 19 white-pink 19 14 10 20 pink-brown 20 12 10 21 white-blue 21 14 11 22 brown-blue 22 12 11 23 white-red 23 14 12 24 brown-red common low - - 24 12 12 brown-black shield 25 white-black 5 COMPACT valves P10 5_11 5_12
Benzer belgeler
P S C 2 6 0 2 4
Ambient temperature
max +50 °C
Fluid temperature
not dehumidified filtered air 10 μm, lubricated or not
Fluid
spool
Commutation system