melin şahin

Transkript

melin şahin

MELİN ŞAHİN
Associate Professor
Department of Aerospace Engineering
Middle East Technical University
06800, Ankara, TURKEY
Voice : +90 (312) 2104256
Fax : +90 (312) 2104250
E-mail : [email protected]
Web Page : http://www.ae.metu.edu.tr/~melin/
EDUCATIONAL BACKGROUND
2004-2005:
Postdoctoral Research Fellow
University of Southampton
School of Engineering Sciences, Department of Ship Science and Winchester School of Art,
Textile Conservation Centre
Research Topic: Investigation of Potential Techniques for Damage Monitoring in Historic
Tapestries
Full details in “Statement of Research Interest” section
2000-2004:
Doctor of Philosophy (PhD.)
University of Southampton
School of Engineering Sciences
Lightweight and Composite Structures Research Group
Thesis Title: Damage Identification in Beam-like Structures by Vibration-based Analysis
and Artificial Neural Networks
1996-1999:
Master of Science (MSc.)
Department of Aeronautical Engineering
Thesis Title: Wing Structural Characteristics of a Medium-Range Transport Aircraft
1990-1996:
Bachelor of Science (BSc.)
Department of Aeronautical Engineering
1/13
CV - Dr. Melin ŞAHİN
WORK EXPERIENCE
December 2012 Present
Lecturer (Associate Professor Dr.)
Middle East Technical University, Department of Aerospace Engineering
July 2006 -
Lecturer (Assistant Professor Dr.)
December 2012
Oct 2005-June 2006
Instructor (Dr.)
June 2004-May 2005 Postdoctoral Research Fellow (Dr.)
University of Southampton, School of Engineering Sciences and Winchester
School of Art, Textile Conservation Centre
Monitoring degradation in materials by contact (i.e. fibre optic strain sensors) and
non-contact (i.e. electronic speckle pattern shearing interferometry) techniques.
Oct 2000-May 2004 Research Assistant
University of Southampton, School of Engineering Sciences
Tutorial and laboratory demonstrations for engineering undergraduate students at
University of Southampton with the subjects of mechanics of material, dynamics,
thermodynamics and solid mechanics.
Oct 1996-Sept 2000 Research Assistant (4-year full time employment)
Middle East Technical University, Department of Aeronautical Engineering
Tutorial and laboratory demonstrations for engineering undergraduate students at
Middle East Technical University with the subjects of aeronautical structures, static,
dynamics, mechanical vibrations, finite element modelling and analysis. Working as
part of the team of researchers on project of finite element design and dynamic
analysis of medium-range transport aircraft wing.
June 1993-Aug 1993 Summer Practice II (Aeronautical Applications)
Turkish Aerospace Industries Inc. (TAI), Ankara, Turkey
Research and Development Department Centre
Management and organisation of aeronautical industries. Aircraft design, assembly
and manufacturing.
June 1992-July 1992 Summer Practice I (Aeronautical Applications)
1st Air Supply and Maintenance Centre, Eskisehir, Turkey
Assembly of mechanical aircraft parts, maintenance of aircraft, quality control of
relevant parts and aircraft motor testing.
2/13
STATEMENT OF RESEARCH INTEREST
Postdoctoral Research:
Title: Investigation of Potential Techniques for Damage Monitoring in Historic Tapestries
Research Abstract: Tapestries and other large wall hangings are of major historic and cultural significance
and form an integral part of the interior of many historic houses. They are large and heavy and while they are
on continuous display damage may be caused, not only because of their vulnerability to the environment but
also through the stress imposed by their own weight. Textile conservators understand the chemistry of fibres
and dyes and the way they interact with the environment. They routinely monitor and control the environment
to enhance the long-term preservation of tapestries and other artefacts. Although they are experienced in
visually assessing textiles for evidence of their inherent response to the stress caused by hanging, they have
never been able to quantify this damage. The development of effective monitoring techniques will enable
areas of degradation to be identified before it is visually apparent that damage is occurring. The development
of such techniques will mean that the optimum time for conservation treatment can be predicted and different
methods of treatment can be evaluated.
Philosophy of Doctorate (PhD) Research:
Title: Damage Identification in Beam-like Structures by Vibration-based Analysis and Artificial Neural
Networks
Research Abstract: Laminated composites and sandwich structures are being increasingly used in different
engineering applications, especially in aeronautical, marine and offshore structures where high stiffness,
lightweight, good corrosion resistance and temperature stability are the primary issues. During their service
life, these structures experience extreme loading and harsh environmental condition leading structural
damage that significantly reduces the mechanical strength and causes an overall performance degradation
in the structure. Therefore, localisation and quantification of the damage in real time so as to maintain the
performance of the structure is one of the promising research areas in engineering applications. Since the
determination of the severity and the location of the damage is an inverse, non-linear and non-unique
problem, an intelligent algorithm is needed to perform the damage detection analysis. This research aims to
develop a damage detection algorithm, which uses vibration-based analysis data obtained from beam-like
structure to locate and quantify the damage by using artificial neural networks. The inputs and the
corresponding outputs required to train the neural network are obtained from the finite element analyses for
different vibration modes of the beams. The designed multi-layer feed-forward back-propagation neural
networks are trained by using different damage scenarios. After validation of the neural networks, new
damage cases are introduced and neural networks are tested for the location and severity predictions. The
results from the neural network depict that severity and location of the damage can be predicted by using as
input the global (natural frequencies) and the local (strain or curvature mode shapes) dynamic behaviour of
the structure.
Master of Science (MSc) Research:
Title: Wing Structural Characteristics of a Medium-Range Transport Aircraft
Research Abstract: The analysis of aircraft structures is one of the most important and challenging issues
that an aeronautical engineer faces. The methods of structural analysis are two types, namely analytical and
numerical methods. Analytical methods provide closed-form solutions only at certain relatively simple cases
and practically cannot be used in the analysis of complex structures. The finite element method, which is a
numerical procedure, is most widely used to solve various structural mechanics problems as a powerful and
accurate analysis tool. In this thesis, wing structural characteristics of a medium-range transport aircraft are
investigated by using a finite element package called I-DEAS (Integrated Design Engineering and Analysis
Software). The three dimensional solid model of the wing is constructed and thereafter by using one and
two-dimensional finite elements, a mixed mesh is generated on the model. After the application of the
boundary conditions, the dynamic and static analyses are performed and the solutions for the wing are
obtained for with and without fuel cases. The results are presented in terms of the natural frequencies and
mode shapes for the dynamic analysis and the displacements and stresses for the static analysis. These
results are further analysed in order to find the effect of the fuel and to investigate the behaviour of the wing.
3/13
TECHNICAL PUBLICATIONS
Science Citation Index

Onat, C., Sahin, M. and Yaman,Y. Fractional Controller Design for Suppressing Smart Beam
Vibrations. Aircraft Engineering and Aerospace Technology, 2012, 84(4): 203-212.

Sahin, M. and Aridogan, M.U. Performance Evaluation of Piezoelectric Sensor/Actuator on
Active Vibration Control of a Smart Beam. Proceedings of the Institution of Mechanical
Engineers, Part I, Journal of Systems and Control Engineering, 2011, 225(5): 533-547.

Sahin, M., Karadal, F.M., Yaman,Y, Kircali, O.F., Nalbantoglu, V., Ulker, F.D., and Caliskan,
T. Smart structures and their applications on active vibration control: Studies in the Department
of Aerospace Engineering, METU, Journal of Electroceramics, 2008, 20(3-4): 167-174.

Kircali, O.F., Yaman,Y, Nalbantoglu, V., Sahin, M., Karadal, F.M., and Ulker, F.D. Spatial
control of a smart beam, Journal of Electroceramics, 2008, 20(3-4): 175-185.

Sahin, M. and Shenoi, R.A. Vibration-based Damage Identification in Beam-like Composite
Laminates. Proceeding of Institute of Mechanical Engineers, Part C, Journal of Mechanical
Engineering Science, 2003, 217(6): 661-676.

Sahin, M. and Shenoi, R.A. Quantification and Localisation of Damage in Beam-like Structures
by using Artificial Neural Networks with Experimental Validation. Engineering Structures,
2003, 25(14), 1785-1802.

Yaman, S.D., Sahin, M., and Aydin, C. Finite Element Analysis of Strength Characteristics of
Various Resin Based Restorative Materials in Class V Cavities. Journal of Oral Rehabilitation,
2003, 30(6): 630-641.

Yaman, S.D., Karacaer, O., and Sahin, M. Stress Distribution of Post-Core Applications in
Maxillary Central Incisors. Journal of Biomaterials Applications, 2004, 18(3): 63-177.
Science Citation Index (Technical Note)

Dawood, T.A., Shenoi, R.A., Sahin, M. A procedure to embed fibre Bragg grating strain
sensors into GFRP sandwich structures, Composites: Part A, Applied Science and
Manufacturing, 2007, 38, 217–226.
Total Citations to Technical Publications: 53 (SCIE) (till 2012)
Others
Book:

Sahin, M. “Damage Identification in Beam-like Structures via Vibration-based Analyses and
Artificial Neural Networks”, VDM Verlag Dr. Müller Publications, (ISBN-13: 978-3-63936582-5, ISBN-10: 3639365828, EAN: 9783639365825), 2011.
[PhD. Dissertation ]
4/13
Book Chapter:

Kircali, O.F., Yaman, Y., Nalbantoglu, V. and Sahin, M. Active Vibration Control of a Smart
Beam by Using A Spatial Approach, New Developments in Robotics, Automation and Control,
I-TECHONLINE, I-Tech Education and Publishing, 2008, 377-410.

Sahin, M., Chambers, A., Dokos, L., Dulieu-Barton, J.M., Earl, J.S., Eastop, D., and Lennard, F.
Understanding Engineering Techniques and their Potential in Conservation, in Tapestry
Conservation: Principles and Practice, eds. Lennard, F. and Hayward, M., Elsevier Scientific
Publications. (formerly Butterworth-Heinemann), 2006, 227-234.
Conferences: International

Pedramasl, N., Sahin, M., Acar, E., Multi-Objective Optimization of Transducers used in
Modal Test of an Unmanned Aerial Vehicle Wing, International Conference on Advances in
Vibrations, Vibrations2015, 30 March - 01 April 2015, Port, Portugal.

Pedramasl, N., Sahin, M., Acar, E., Multi-Objective Optimization of Types, Numbers and
Locations of Transducers Used in Modal Test of a Fin-Like Structure, Tokyo International
Conference on Engineering and Applied Science, TICEAS 2014, 17-19 December 2014, Tokyo,
Japan.

Amer, C. and Sahin, M., Structural Analysis of a Composite Wind Turbine Blade, World
Academy of Science, Engineering and Technology, WASET 2014, Istanbul, Turkey.

Arslan, P., Kalkan, U., Tiras, H., Tuncoz, I.O., Yang, Y., Gurses, E., Sahin, M., Ozgen, S.,
Yaman, Y., Structural Analysis of an Unconventional Hybrid Control Surface of a Morphing,
Wing, ICAST2014: 25th International Conference on Adaptive Structures and Technologies,
06-08 October 2014, The Hague, Netherlands

Arslan, P., Kalkan, U., Tiras, H., Tuncoz, I.O., Yang, Y., Gurses, E., Sahin, M., Ozgen, S.,
Yaman, Y., A Hybrid Trailing Edge Control Surface Concept, DeMEASS-VI, 6th Conference
for Design, Modelling and Experiments of Advanced Structures and Systems, 25-28 May 2014,
Ede-Wageningen, Netherlands.

Avsar, A. L. and Sahin, M. Energy Harvesting Studies on Fin-like Structure via Piezoelectric
Material, AIAC, 7th Ankara International Aerospace Conference, 11-13 September 2013,
METU, Ankara, Turkey.

Onat, C., Sahin, M., Yaman, Y. Optimal Control of a Smart Beam by Using a Luenberger
Observer, ICEAF III, 3rd International Conference of Engineering Against Failure, 26-28 June
2013, Kos, Greece.

Aktasoğlu, S. and Sahin, M. Damage Detection in Beam-like Structures via Combined Genetic
Algorithm and Nonlinear Optimisation, The Eleventh International Conference on
Computational Structures Technology, CST 2012, 4-7 September 2012, Dubrovnik, Croatia.

Kahraman, E. and Sahin, M. Extracting Modal Parameters of a Fin-Like Structure via
Operational Modal Analysis, AIAC, 6th Ankara International Aerospace Conference, 14-16
September 2011, METU, Ankara, Turkey.

Onat, C., Sahin, M. , Yaman, Y. An Experimental Performance Evaluation for the Suppression
of Vibrations of the Second Mode of a Smart Beam, AIAC, 6th Ankara International Aerospace
Conference, 14-16 September 2011, METU, Ankara, Turkey.
5/13

Onat, C., Sahin, M., Yaman, Y. Performance Analysis of a Fractional Controller Developed for
the Vibration Suppression of a Smart Beam, 5th ECCOMAS Thematic Conference on Smart
Structures and Materials (SMART´11), Conference CD: 213-222, Saarland University, 6-8 July
2011, Saarbrücken, Germany.

Onat, C., Sahin, M., Yaman, Y. Active Vibration Suppression of a Smart Beam by using a
Fractional Control, 2nd International Conference of Engineering Against Fracture (ICEAF II)
22-24 June 2011, Mykonos, Greece.

Onat, C., Sahin, M., Yaman, Y. Active Vibration Suppression of a Smart Beam by using an
LQG Control Algorithm, 2nd International Conference of Engineering Against Fracture (ICEAF
II) 22-24 June 2011, Mykonos, Greece.

Kahraman, E. and Sahin, M. Dynamic Property Estimation of Lightweight Aircraft Structures
via Operational Modal Analysis in Wind Tunnel and In-Vacuo Conditions, 4th International
Operational Modal Analysis Conference, (IOMAC'11), 9-11 May 2011, Istanbul, Turkey.

Onat, C., Sahin, M., Yaman, Y. Active Vibration Suppression of a Smart Beam via PIλDµ
Control, IWPMA 2010, International Workshop on Piezoelectric Materials and Applications in
Actuators, 10-13 October 2010, Antalya, Turkey.

Sahin, M. Vibration-based Damage Identification in Sandwich Beams using Artificial Neural
Networks, The Tenth International Conference on Computational Structures Technology, CST
2010, 14-17 September 2010, Valencia, Spain.

Sahin, M., Sakarya, E., Unlusoy, L., Insuyu, E.T., Seber, G., Ozgen, S., Yaman, Y. Design,
Analysis and Experimental Modal Testing of a Mission Adaptive Wing of an Unmanned Aerial
Vehicle, UVW2010, International Unmanned Vehicle Workshop, Paper ID: 10, 10-12 June
2010, Turkish Air Force Academy, Istanbul, Turkey.

Ozgen, S., Yaman, Y., Sahin, M., Seber, G., Sakarya, E., Unlusoy, L., Insuyu, E.T., Bayram, G.,
Uludag, Y., Yilmaz, A. Morphing Air Vehicle Concepts, UVW2010, International Unmanned
Vehicle Workshop, Paper ID: 5, 10-12 June 2010, Turkish Air Force Academy, Istanbul,
Turkey.

Arıdoğan, U., Şahin, M., Nalbantoğlu, V., Yaman, Y., Active Vibration Suppression of A Smart
Beam via Self-Sensing Piezoelectric Actuator. AIAC, 5th Ankara International Aerospace
Conference, 17-19 August 2009, METU, Ankara, Turkey.

Seber, G., Sakarya, E., İnsuyu, E.T., Özgen, S., Şahin, M., Yaman, Y. Structural Modeling and
Aeroelastic Analysis of Variable Camber Wings. AIAC, 5th Ankara International Aerospace
Conference, 17-19 August 2009, METU, Ankara, Turkey.

Seber, G., Sakarya, E., Insuyu, E.T., Sahin, M., Ozgen, S., Yaman, Y. Evaluation of a Camber
Morphing Concept Based on Controlled Flexibility, IFASD 2009, International Forum on
Aeroelasticity and Structural Dynamics 2009, 21-25 June 2009, Seattle, Washington, USA.

Karadal, F.M., Nalbantoglu, V., Sahin, M., Seber, G., Kircali, O.F., Yaman, Y. Active Flutter
Control of a Smart Fin, ICAST 2008, 19th International Conference on Adaptive Structures and
Technologies, 6-9 October 2008, Ascona, Switzerland.

Karadal, F.M., Seber, G., Sahin, M., Nalbantoglu, V., Yaman, Y. State Space Representation of
Smart Structures Under Unsteady Aerodynamic Loading, AIAC, 4th Ankara International
Aerospace Conference, 10-12 September 2007, METU, Ankara, Turkey.

Dulieu-Barton, J.M., Sahin, M., Lennard, F.L., Eastop, D.D., Chambers, A.R. Assessing the
Feasibility of Monitoring the Condition of Historic Tapestries Using Engineering Techniques,
Seventh International Conference On Damage Assessment of Structures DAMAS 2007 25th 27th June 2007, Torino, Italy.
6/13

Kircali, O.F., Yaman,Y, Nalbantoglu, V., Sahin, M., Karadal, F.M. Application of Spatial H∞
Control Technique for Active Vibration Control of A Smart Beam, ICINCO 2007, 4th
International Conference on Informatics in Control, Automation and Robotics, Paper C3-425,
09-12 May 2007, Angers, France.

Sahin, M. Identification of Damage In Sandwich Beams by Using Vibration-Based Analysis and
Artificial Neural Networks. ICMSAO’ 07 Second International Conference On Modeling,
Simulation And Applied Optimization, March 24 – 27, 2007, The Petroleum Institute, Abu
Dhabi, UAE.

Kircali, O.F., Yaman, Y., Nalbantoglu, V., Sahin, M., Karadal, F. M., Ulker, F.D. Spatial
Control of a Smart Beam, IWPMA 2006, 3rd International Workshop on Piezoelectric Materials
and Applications in Actuators, 18-21 June 2006, Anadolu University, Eskisehir, Turkey.

Sahin, M., Yaman, Y., Nalbantoglu, V., Karadal, F.M., Kircali, O.F., Ulker, F.D., Caliskan, T.
Smart Structures and Their Applications on Active Vibration Control: Studies in the Department
of Aerospace Engineering, METU, IWPMA 2006, 3rd International Workshop on Piezoelectric
Materials and Applications in Actuators, 18-21 June 2006, Anadolu University, Eskisehir,
Turkey.

Dawood, T.A., Shenoi, R.A., Veres, S.M., Sahin, M. and Gunning, M.J. Damage
Characterisation in FRP Sandwich Beams using a Wavelet based Multifractal Approach. Second
European Workshop on Structural Health Monitoring, Proceeding of the Second European
Workshop. Forum am Deutschen Museum, Munich, Germany. July 7-9, 2004, 653-660.

Dawood, T.A., Shenoi, R.A., Veres, S.M., and Sahin, M. Low Level Damage Characterisation
in FRP Sandwich Beams using the Lipschitz Exponent. Second European Workshop on
Structural Health Monitoring, Proceeding of the Second European Workshop. Forum am
Deutschen Museum, Munich, Germany. July 7-9, 2004, 661-668.

Dawood, T.A., Shenoi, R.A., Veres, S.M., Sahin, M. and Gunning, M.J. Damage Detection in a
Sandwich Composite Beam Using Wavelet Transforms. Smart Structures and Materials 2003:
Modeling, Signal Processing, and Control, Proceedings of SPIE. 3-6 March 2003, San Diego,
California, USA, Vol. 5049, 706-717.

Sahin, M. and Shenoi, R.A. Damage Detection in FRP Laminated Beams Using Neural
Networks. First European Workshop on Structural Health Monitoring, Proceeding of the First
European Workshop. Ecole Normale Superieure, Cachan (Paris), France. July 10-12, 2002, 726733.
Paper (In Non-Technical Journal):

Dulieu-Barton, M. J. Dokos, L., Eastop, D., Lennard, F., Chambers, A. and Sahin, M.
Deformation and strain measurement techniques for the inspection of damage in works of art
Reviews in Conservation, Number 6, 2005, 63-73.
Conferences: National – (all in Turkish)

Arslan, P., Kalkan, U., Tıraş, H., Tunçöz, İ.O., Yang, Y., Gürses, E., Özgen, S., Şahin, M.
Yaman, Konvansiyonel Olmayan İki Farklı Kontrol Yüzeyinin Yapısal Özelliklerinin
Değerlendirilmesi ve Karşılaştırılması, UHUK2014, V. Ulusal Havacılık ve Uzay Konferansı,
08-10 Eylül 2014, Erciyes Üniversitesi, Kayseri, Konferans CD: UHUK-2014-077.
7/13

Tunçöz, İ.O., Yang, Y., Özgen, S., Gürses, E., Şahin, M. Yaman, Konvansiyonel ve
Konvansiyonel Olmayan Kontrol Yüzeylerine Sahip İnsansız Hava Aracı Kanatlarının
Aerodinamik Özelliklerinin Değerlendirilmesi, SAVTEK2014, 7. Savunma Teknolojileri
Kongresi, 25-27 Haziran 2014, ODTÜ, Ankara, Konferans CD: 1453-1460.

Arslan, P., Kalkan, U., Tıraş, H., Tunçöz, Gürses, E., Özgen, S., Şahin, M. Yaman,
Konvansiyonel ve Konvansiyonel Olmayan Kontrol Yüzeylerine Sahip İnsansız Hava Aracı
Kanatlarının Ağırlıklarının İncelenmesi, SAVTEK2014, 7. Savunma Teknolojileri Kongresi, 2527 Haziran 2014, ODTÜ, Ankara, Konferans CD: 90-97

Arslan, P., Kalkan, U., Tıraş, H., Tunçöz, İ.O., Yang, Y., Özgen, S., Şahin, M., Gürses, E.,
Yaman, Bir İnsansız Hava Aracının Konvansiyonel Olmayan Esnek Kontrol Yüzeylerinin
Yapısal Analizi ve İç Yapısının Tasarımı, HİTEK2014, 3. Havacılıkta İleri Teknolojiler
Konferansı, 18-20 Haziran 2014, HHO İstanbul.

Avşar, A. L., Şahin, M. Hava Yapıları Üzerinden Farklı Tip Piezoelektrik Malzemeler
Kullanılarak Enerji Hasatı Çalışmaları, UHAT2013, II. Ulusal Havacılık Teknolojisi ve
Uygulamaları Kongresi, 29-30 Kasım 2013, Hava Teknik Okullar Komutanlığı - Hava Astsubay
Meslek Yüksek Okulu, İzmir.

Arslan, P., Kalkan, U., Yang, Y., Özgen, S., Şahin, M. Gürses, E., Yaman, Y. Büyük Oranda
Şekil Değiştirebilen Kanat Yüzeylerinin Aerodinamik Yükler Altında Davranışları, UHAT2013,
II. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, 29-30 Kasım 2013, Hava Teknik
Okullar Komutanlığı - Hava Astsubay Meslek Yüksek Okulu, İzmir.

Tıraş, H., Tunçöz, İ. O., Gürses, E., Şahin, M. Özgen, S., Yaman, Y. Büyük Oranda Şekil
Değiştirebilen Kontrol Yüzeylerinin Yapısal Özelliklerinin Değerlendirilmesi, UHAT2013, II.
Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, 29-30 Kasım 2013, Hava Teknik
Okullar Komutanlığı - Hava Astsubay Meslek Yüksek Okulu, İzmir.

Yaman, Y., Özgen, S., Şahin, M., Gürses, E. Büyük Oranda Şekil Değiştirebilen Kanat/ Kontrol
Yüzeylerinin Uçuştaki Etkileri ", UHAT2012, I. Ulusal Havacılık Teknolojisi ve Uygulamaları
Kongresi, 20-22 Aralık 2012, Ege Üniversitesi, Ege Meslek Yüksek Okulu, İzmir.

Aktaşoğlu, S., Şahin, M. Kiriş Benzeri Yapılarda Testere Kesiği Tipi Hasarların Birleşik
Genetik Algoritma ve Lineer Olmayan Optimizasyon İle Tespiti, IV. Ulusal Havacılık Ve Uzay
Konferansı, 12-14 Eylül 2012, Hava Harp Okulu, İstanbul.

Avşar, A. L., Şahin, M. Hava Aracının Üzerinden Titreşim Kaynaklı Enerji Hasatı Çalışmaları,
IV. Ulusal Havacılık Ve Uzay Konferansı, 12-14 Eylül 2012, Hava Harp Okulu, İstanbul.

Körpe, D. S., Ünlüsoy, L., Şahin, M., Özgen, S. Yaman, Y. Büyük Oranda Şekil Değiştirebilen
Kanatların Ön Tasarım Sürecinde Aerodinamik ve Yapısal Analizlerinin Eşlenmesi, IV. Ulusal
Havacılık Ve Uzay Konferansı, 12-14 Eylül 2012, Hava Harp Okulu, İstanbul.

Avşar, A. L., Şahin, M. Piezoelektrik Malzemeler Yardımıyla Enerji Hasatı, SAVTEK 2012, 6.
Savunma Teknolojileri Kongresi, 20-22 Haziran 2012, ODTÜ, Ankara, 2012.

Altuğ, M. N., Şahin, M. Bir Jet Eğitim Uçağı Kokpitinin Yapısal Analizleri, SAVTEK 2012, 6.
Savunma Teknolojileri Kongresi, 20-22 Haziran 2012, ODTÜ, Ankara, 2012.

Aktaşoğlu, S., Şahin, M. Kiriş Benzeri Yapılarda Birleşik Genetik Algoritma ve Lineer
Olmayan Optimizasyon İle Hasar Tespiti, SAVTEK 2012, 6. Savunma Teknolojileri Kongresi,
20-22 Haziran 2012, ODTÜ, Ankara, 2012.

Ünlüsoy, L., Körpe, D. S., Şahin, M., Özgen, S. Yaman, Y. Büyük Oranda Şekil Değiştirebilen
Kanatların Aerodinamik ve Yapısal Tasarımı, SAVTEK 2012, 6. Savunma Teknolojileri
Kongresi, 20-22 Haziran 2012, ODTÜ, Ankara, 2012.
8/13

Ünlüsoy, L., Yaman, Y., Şahin, M., Özgen, S., Seber, G., İnsuyu, E. T., Sakarya, E. Göreve
Uyumlu Kanatlara Sahip Bir İnsansız Hava Aracının Uçuş Testleri ve Yapısal Geliştirilmesi,
UMTS2011, 15. Ulusal Makina Teorisi Sempozyumu, Niğde Üniversitesi, 16-18 Haziran 2011,
Niğde, Bildiriler Kitabı: 01-10, ISBN: 978-975-8062-25-6.

Onat, C., Şahin, M. , Yaman, Y. Akıllı Bir Kirişin Titreşimlerinin Aktif Denetimi İçin PIλDµ
ve PID Denetçilerin Değerlendirilmesi, UMTS2011, 15. Ulusal Makina Teorisi Sempozyumu,
Niğde Üniversitesi, 16-18 Haziran 2011, Niğde, Bildiriler Kitabı: 295-304, ISBN: 978-9758062-25-6.

Yaman, Y., Özgen, S., Şahin, M., Seber, G., Sakarya, E., İnsuyu, E. T., Ünlüsoy, L. ODTÜ'de
Yapılan İnsansız Hava Aracı Çalışmaları, TMMOB Makina Mühendisleri Odası, VI. Ulusal
Uçak, Havacılık ve Uzay Mühendisliği Kurultayı, 06-07 Mayıs 2011, Eskişehir, Bildiriler
Kitabı: 79-83 TMMOB, MMO Yayın No: E/2011/553, ISBN: 978-605-01-0100-3.

Şahin, M., İnsuyu, E.T., Sakarya, E. Ünlüsoy, L., Özgen, S., Seber, G., ve Yaman, Y. Göreve
Uyumlu Kanatları Olan Bir İnsansız Hava Aracı Gövdesinin Yapısal Tasarımı ve Analiz,
SAVTEK2010, 5. Savunma Teknolojileri Kongresi, Bildiriler Kitabı: 671-678, ODTÜ, Ankara,
2010.

Şahin, M., Ünlüsoy,L., Sakarya, E., İnsuyu, E.T., Seber, G., Özgen, S., ve Yaman, Y. Göreve
Uyumlu Bir İnsansız Hava Aracı Kanadının Yapısal Modellenmesi ve Deneysel Doğrulanması,
SAVTEK2010, 5. Savunma Teknolojileri Kongresi, Bildiriler Kitabı: 663-670, ODTÜ, Ankara,
2010.

Yaman, Y., Özgen, S., Şahin, M., Seber, G., Nalbantoğlu, V., Sakarya, E., İnsuyu, E.T., ve
Ünlüsoy, L. Göreve Uyumlu Kanatlara Sahip bir İnsansız Hava Aracının Tasarımı, UMTS2009,
14. Ulusal Makina Teorisi Sempozyumu, Bildiriler Kitabı: 481-489, ODTÜ Kuzey Kıbrıs
Kampüsü, Güzelyurt, KKTC, 2009.

Arıdoğan, U., Şahin, M., Nalbantoğlu, V., ve Yaman, Y., Piezoelektrik Yamaların Akıllı Bir
Kirişin Titreşim Kontrolünde Algılayıcı ve Uyarıcı Olarak Kullanılması, UMTS2009, 14.
Ulusal Makina Teorisi Sempozyumu, Bildiriler Kitabı: 275-281, ODTÜ Kuzey Kıbrıs Kampüsü,
Güzelyurt, KKTC, 2009.

Arıdoğan, U., Şahin, M., Nalbantoğlu, V., ve Yaman, Y. Piezoelektrik Yamaların Akıllı Bir
Kirişin Titreşim Özelliklerinin Bulunmasında Algılayıcı Olarak Kullanılması, XVI. Ulusal
Mekanik Kongresi, Erciyes Üniversitesi, Kayseri, 2009.

Yaman, Y., Özgen, S., Şahin, M., Seber, G., Nalbantoğlu, V., Sakarya, E., İnsuyu, E.T.,
Ünlüsoy, L., Bayram, G., Uludağ, Y. ve Yılmaz, A. ODTÜ’de Sürdürülen İnsansız Hava Aracı
Çalışmaları, TMMOB Makina Mühendisleri Odası, V. Ulusal Uçak, Havacılık ve Uzay
Mühendisliği Kurultayı, TMMOB, MMO Yayın No :E/2009/497-1, ISBN: 978-9944-89-723-5,
Bildiriler Kitabı: 87-93, Eskişehir, 2009.

Seber, G., İnsuyu, E. T., Özgen, S., Şahin, M. ve Yaman, Y. Değişken Kambura Sahip
NACA4412 Kanat Kesitinin 2- Boyutlu Aerodinamik Analizi, 2. UHUK, II. Ulusal Havacılık ve
Uzay Konferansı, Konferans CD: UHUK-2008-012, İTÜ, İstanbul, 2008.

Seber, G., Şahin,M., Özgen, S. Nalbantoğlu, V. ve Yaman, Y. “Göreve Uyumlu Kanat
Tasarım ve Geliştirme Çalışmaları”, SAVTEK 2008, 4. Savunma Teknolojileri Kongresi, 26-27
Haziran 2008, ODTÜ, Ankara, 2008.

Karadal, F. M., Şahin, M., Kırcalı, Ö.F., Nalbantoğlu, V. ve Yaman Y., Akıllı bir Kirişin Statik
Aerodinamik Yükler Altındaki Davranışı, UMTS 2007, 13. Ulusal Makina Teorisi
Sempozyumu, Bildiriler Kitabı:361-369, Cumhuriyet Üniversitesi, Sivas, 2007.
9/13

Kırcalı, Ö. F., Yaman,Y., Nalbantoğlu, V., Şahin, M. ve Karadal, F. M. Akıllı bir Kirişin
Titreşim Kontrolunda Uzamsal ve Noktasal Denetçilerin Karşılaştırılması, 1. UHUK, 1. Ulusal
Havacılık ve Uzay Konferansı, ODTÜ, Ankara, 2006.

Şahin, M. Kompozit ve Sandviç Kirişlerdeki Hasar Şiddetinin Titreşim Bazlı Analizler ve
Yapay Sinir Ağları ile Tespiti. 1. UHUK, 1. Ulusal Havacılık ve Uzay Konferansı, ODTÜ,
Ankara, 2006.

Şahin, M. Kiriş Benzeri Yapılarda Titreşim Temelli Analizler ve Yapay Sinir Ağları ile Hasar
Tespiti. ASYU 2006, Akıllı Sistemlerde Yenilikler ve Uygulamaları Sempozyumu, İstanbul,
2006.

Kırcalı, Ö. F., Yaman, Y., Nalbantoğlu, V. Şahin, M., Karadal, F. M. ve Ülker, F. D. Akıllı bir
Kirişin Uzamsal Sistem Modelinin Elde Edilmesi, HaSeM’06, Kayseri VI. Havacılık
Sempozyumu, Bildiriler Kitabı: 247-251, Erciyes Üniversitesi/ TOBB-ETÜ, Nevşehir, 2006.

Kırcalı, Ö. F., Yaman,Y., Nalbantoğlu, V., Şahin, M. ve Karadal, F. M. Akıllı bir Kirişin
Varsayılan Biçimler Metodu ile Uzamsal Sistem Modelinin Elde Edilmesi ve Elde Edilen
Modelin İyileştirilmesi, HaSeM’06, Kayseri VI. Havacılık Sempozyumu, Bildiriler Kitabı: 164168, Erciyes Üniversitesi/ TOBB-ETÜ, Nevşehir, 2006.
Paper (In Magazine, in Turkish):

S. Özgen, G. Seber, M. Şahin, Y. Yaman, G. Bayram, Y. Uludağ, A. Yılmaz, Şekil Değiştiren
Uçaklar Havacılıkta Yeni Bir Devrim Yaratabilir mi? Savunma ve Havacılık Dergisi,
ISSN: 1300-2082, Cilt:22/126, Sayı: 2008/02, Sayfa: 125-128, 2008.

Özgen, S., Yaman, Y., Bayram, G., Şahin, M., Yılmaz, A., Uludağ, Y. Şekillendirilebilir Hava
Aracı Konseptleri, Savunma Sanayii Gündemi, ISSN: 1307-8380, Cilt: 2010/2, Sayı: 12, Sayfa:
59-65, 2010.

Yaman, Y., Özgen, S., Şahin, M., Seber, G., Ünlüsoy, L., İnsuyu, E. T., Sakarya, E. Göreve
Uyumlu Kumanda Yüzeylerinin Geliştirilmesi. Savunma ve Havacılık Dergisi, ISSN: 13002082, Cilt:25/43, Sayı: 2011/01, Sayfa: 161-162, 2011.
PROJECT WORK
International

FP7-AAT-2012-RTD-1, AAT.2012.1.1-2: Aerostructures, Project No: 314139 – “CHANGE,
Combined morpHing Assessment software usiNG flight Envelope data and mission based
morphing prototype wing development” FP7, (On going project, Starting Date: 01.08.2012,
Duration: 36 months) - Project Partner, Researcher.

AVT/T-133 – “Development and Verification of Various Strategies for the Active Vibration
Control of Smart Aerospace Structures Subjected to Aerodynamic Loading” Canada-Turkey
joint project, Researcher. (Completed, Starting Date: 01.04.2006, End Date: 31.03.2008.
Duration: 24 months + 6 months of extension) - Project Partner, Researcher.
10/13
National

TUBITAK - 112M845 (The Scientific and Technological Research Council of Turkey)
“Optimization of Types, Numbers and Locations of Sensors and Actuators used in Modal
Analysis of Aircraft Structures using Genetic Algorithm”, (On going project, Starting Date:
01.04.2013, Duration: 24 months) - Director.

TUBITAK - 107M103 (The Scientific and Technological Research Council of Turkey)
“Aeroservoelastic Analysis of the Effects of Camber and Twist on Tactical Unmanned Aerial
Vehicle
Mission-Adaptive
Wings”,
(Completed,
Starting
Date:
01.10.2007,
End Date: 31.03.2011, Duration: 36 months) - Researcher.

BAP-03-13-2014-001 (Scientific Research Projects of Middle East Technical University),
“Active Vibration Suppression of Aerospace Structures with Piezoelectric Materials via Novel
Adaptive Controllers”, (On going project, Starting Date: 01.01.2014, End Date: 31.12.2015,
Duration: 24 months) - Director.

“Vibration-based Energy Harvesting on Aircraft Structures via Piezoelectric Materials”,
(Completed, Starting Date: 01.01.2012, End Date: 31.12.2013, Duration: 24 months) - Director.

“Prediction and Verification of Dynamic Properties of Aerospace Structures via Experimental
Modal Testing”, (Completed, Starting Date: 01.01.2008, End Date: 31.12.2009, Duration: 24
months) - Director.
TECHNICAL INTERESTS

Structural dynamics and analysis

Light-weight and composite/sandwich structure applications

Structural health monitoring and damage identification via vibration-based signatures

Active vibration control

Smart structures

Morphing aerospace structures

Biomaterial applications
THESIS SUPERVISED [Department of Aerospace Engineering, METU]
 Aktaşoğlu, S. “Damage Detection in Beam-like Structures via Combined Genetic Algorithm and
Non-Linear Optimisation”, Middle East Technical University, February, 2012.
 Altuğ, M. N. “Structural Analysis of a Jet Trainer Cockpit”, Middle East Technical University,
February, 2012.
 Kahraman, E. “Investigation of the Dynamic Properties of Plate-like Structures”, Middle East
Technical University, September, 2011.
11/13
 Arıdoğan, M. U. “Performance Evaluation of Piezoelectric Sensor/Actuator on Investigation of
Vibration Characteristics and Active Vibration Control of A Smart Beam”, Middle East Technical
University, June, 2010. (Co-Superviser: Dr. Volkan Nalbantoğlu (Aselsan))
 İnsuyu, E. T. “Aero-Structural Desin and Analysis of An Unmanned Aerial Vehicle and Its
Mission Adaptive Wing”, Middle East Technical University, February, 2010.
TEACHING [Department of Aerospace Engineering, METU]
Graduate Level:

AE 568 Experimental Analysis of Vibrating Structures [2008, 2009, 2010, 2011: Spring
Semester]
Undergraduate Level:

AE 261 Statics [2005, 2006, 2007, 2009, 2012: Fall Semesters]

AE 262 Dynamics [2008, 2011: Spring Semesters]

AE 264 Strength of Materials [2005, 2006, 2007, 2009, 2010: Spring Semesters]

AE 361 Applied Elasticity [2007, 2008: Fall Semesters]

AE 463 Mechanical Vibrations [2007, 2008, 2010, 2011, 2012, 2013: Fall Semesters]

MECH 208 Dynamics [2009: Summer School]
TECHNICAL PRESENTATIONS

Sahin, M. and Dawood, T.A Damage Identification in FRP Composite Structures - Monitoring
and Management of FRP Structures, Organised by NGCC, Concrete Society and CoSACNet,
BRE, Watford, UK, February 19th, 2003.

Sahin, M. Damage Detection in FRP Structures using Artificial Neural Networks - Access for
Industry: A Student/Industry Showcase, National Maritime Museum, Greenwich, London, UK,
February 27th, 2003.
CONFERENCES AND COURSES ATTENDED

4th International Conference on Damage Assessment of Structures (DAMAS2001), Cardiff,
Wales, UK, June 25th – 28th, 2001.

Pre-conference course on Health Monitoring Techniques: An overview. First European
Workshop on Structural Health Monitoring, Proceeding of the First European Workshop, Ecole
Normale Superieure, Cachan (Paris), France. July 9th, 2002.
12/13

Short Course on Vibration Control in ISVR at University of Southampton, UK, March 24th –
28th, 2003.

5th International Conference on Damage Assessment of Structures (DAMAS2003),
Southampton, UK, July 1st – 3rd, 2003.

1st International Summer Academy on Structural Assessment Monitoring and Control,
(SAMCO) Robinson College, Cambridge University, UK, July 14th – 18th, 2003.

3rd SYSWIND Summer School on Control, Health Monitoring and Wind Energy/Power Grid
Energy, University of Patras, Greece, July 16-20, 2012.
CONFERENCE ORGANIZATION

AIAC 2007, The 4th Ankara International Aerospace Conference. September 10—12, 2007,
METU, Ankara-Turkey (One of the member of the 9-person-organizing committee)

AIAC 2009, The 5th Ankara International Aerospace Conference. August 17-19, 2009, METU
Ankara-Turkey (One of the member of the 7-person-organizing committee)

AIAC 2011, The 6th Ankara International Aerospace Conference. September 14-16, 2009,
METU, Ankara-Turkey (One of the member of the 7-person-organizing committee)
REFEREEING

Refereeing for Wiley [John Wiley & Sons, Inc.] Book Company (Book Proposal)

Refereeing for Journal of Electroceramics (Journal)

Refereeing for IEEE Transactions on Control Systems Technology (Journal)

Advances in Structural Engineering (Journal)

Ankara International Aerospace Conference - AIAC (Conference)

Congress of Defence Technologies (Savunma Teknolojileri Kongresi - SAVTEK) (Conference
in Turkish)

Ulusal Havacılık Teknolojileri ve Uygulamaları Kongresi - UHAT (Conference in Turkish)
13/13

melin şahin

Transkript

Benzer belgeler

büyük oranda şekil değiştirebilen kanat yüzeylerinin aerodinamik

CURRICULUM VITAE - EN / Bilkent University