Ultrasonic sensor
Transkript
Ultrasonic sensor
Ultrasonic sensor diffuse mode sensor RU300U-M30M-2UP8X2-H1151 ■ Düz sonik transdüser yüzü ■ Silindirik gövde M30, yerleşik ■ M12 x 1 erkek ile bağlantı ■ Ölçüm aralığı Easy-Teach ile ayarlanabilir ■ Sıcaklık dengeleme ■ Blind zone: 30 cm ■ Range: 300 cm ■ Resolution: 1 mm ■ Sonic cone angle: 15° ■ 2 x switching outputs, PNP Ausgabe • 2016-08-23T08:10:53+02:00 ■ NO/NC programmable Tip kodu İdent no. RU300U-M30M-2UP8X2-H1151 1610036 Çalışma modu Range Resolution minimum switching range Ultrasound frequency Tekrarlanabilirlik Sıcaklık sapması Linearity error Edge lengths of the nominal actuator Approach speed Geçme hızı ultrasonik cisimden yansımalı sensör 30…300cm 1 mm 25 mm 120 kHz 0.15 tam ölçek %'si 1.5% of full scale ð ± 0.5 % 100 mm ð 8 m/s ð 1.5 m/sn Çalışma gerilimi Kaçak dalgalanma DC nominal çalışma akımı Yüksüz akım I0 Yanıt süresi Hazırlık gecikmesi Output function Çıkış 1 Çıkış 2 Anahtarlama frekansı Histerezis Gerilim düşümü Ie Kısa devre koruması Ters kutup koruması Tel kopma koruması 15… 30VDC 10 % Uss ð 150 mA ð 50 mA 125 msn 300 msn NO/NC, PNP anahtarlama çıkışı Kontak çıkış 4 Hz ð 25 mm ð 2.5 V evet/ döngüsel evet evet Tasarım Radyasyon yönü Boyutlar Gövde malzemesi max. tightening torque right Transducer material Bağlantı IP Derecesi Ortam sıcaklığı Saklama sıcaklığı Declaration of conformity EN ISO/IEC Titreşim direnci MTTF MTTF notu dişli silindirik, M30 düz 75 x Ø30mm metal, CuZn, nikel kaplama 75 Nm Plastic, Epoxyd resin and PU foam erkek, M12 x 1, 5-wire IP67 -25…+70 °C -40…+80 °C EN 60947-5-2 IEC 60068-2 232 yılı SN 29500'e uygun (Ed. 99) 40 °C Anahtarlama durumu Object detected LED sarı LED, green 1/3 Kablo bağlantı şeması İşlevsel prensip Ultrasonic sensors capture a multitude of objects contactless and wear-free with ultrasonic waves. It does not matter whether the object is transparent or opaque, metallic or nonmetallic, firm, liquid or powdery. Even environmental conditions such as spray, dust or rain hardly affect their function. Sonik koni Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com Ultrasonic sensor diffuse mode sensor RU300U-M30M-2UP8X2-H1151 Montaj talimatları / Açıklama Settings The ultrasonic sensor features two switching outputs with adjustable switching range. The adjustments can either be made via Easy-Teach adapter or via buttons (please note, only the RU…U-M…E-2UP8X2T-H1151 types have buttons!). Object presence is signalled by the green and yellow LED. Two switchpoints are taught. They mark the limits of the switching range and may be selected freely within the detection range. Via Easy-Teach adapter ñConnect the teach adapter TX1-Q20L60 between sensor and connection cable ñFor the first limit value, place object accordingly ñPress and hold button for at least 2 to 7 s against Gnd ñFor the second limit value, place object accordingly ñPress and hold button for at least 2 to 7 s against Ub Teach button (please note, only the RU…U-M… E-2UP8X2T-H1151 types have buttons!) ñFor the first limit value, place object accordingly ñ Press and hold button 2 for at least 2 to 7 s ñFor the second limit value, place object accordingly ñ Press and hold button 1 for at least 2 to 7 s After successful teach-in the sensor automatically runs in standard operating mode. Unsuccessful teach-in is signalled by the LED flashing slowly at a frequency of 5 Hz. LED response In standard operating mode both LEDs signal the switching states of the sensor. ñgreen: Object is in the detection range but not in the switching range ñ yellow: Object is in the switching range Ausgabe • 2016-08-23T08:10:53+02:00 ñoff: Object is outside the detection range 2/3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com Ultrasonic sensor diffuse mode sensor RU300U-M30M-2UP8X2-H1151 Aksesuarlar Tip kodu İdent no. Açıklama MW-30 6945005 Dişli silindirik cihazlar için montaj braketi; malzeme Paslan- Ölçekli çizim maz çelik A2 1.4301 (AISI 304) Wiring accessories Tip kodu İdent no. Açıklama RKC4.5T-2/TEL 6625016 Bağlantı kablosu, dişi M12, düz, 5 pimli, kablo uzunluğu: 2 m, Ölçekli çizim kılıf malzemesi: PVC, siyah; cULus onaylı; diğer kablo uzunlukları ve kaliteleri mevcuttur, bkz. www.turck.com WKC4.5T-2/TEL 6625028 Bağlantı kablosu, dişi M12, açılı, 5 pimli, kablo uzunluğu: 2 m, kılıf malzemesi: PVC, siyah; cULus onaylı; diğer kablo uzunlukları ve kaliteleri mevcuttur, bkz. www.turck.com Function accessories Tip kodu İdent no. Açıklama TX1-Q20L60 6967114 Endüktif enkoderleri, lineer konum, açı, ultrasonik ve kapasitif Ölçekli çizim Ausgabe • 2016-08-23T08:10:53+02:00 sensörleri için öğretme adaptörü 3/3 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
Benzer belgeler
Endüktif sensör
Çalışma gerilimi
Kaçak dalgalanma
DC nominal çalışma akımı
Yüksüz akım I0
Yanıt süresi
Hazırlık gecikmesi
Output function
Çıkış 1
Çıkış 2
Anahtarlama frekansı
Histerezis
Gerilim düşümü Ie
Kısa...