DeltaBase 102 Sondaj Makineleri

DeltaBase 102
Sondaj Makineleri
Please consider the environment before printing this presentation
© 2008 Boart Longyear. All rights reserved.
DeltaBase 102
Kullanım Alanları:
Rotary Sondajlar
Rotary Darbeli Sondajlar
Çift Kafalı Rotary / Rotary Sondajlar
Çift Kafalı Rotary / Darbeli Sondajlar
Mini Kazık (406 mm’ ye kadar)
Jet Grouting (18 m)
2
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
Özellikleri:
Üzerindeki konfigürasyona bağlı olarak 16,5 t’ dan hafif
10 t çekme & basma kapasiteli hidrolik kule
4 ve 3 m’ lik tijlerle çalışma olanağı (çift kafalı morset)
Yük hassasiyetli hidrolik pompalar – 147 kW Deutz diesel motor
Hareketli bom
Küçük boyut: 7.170 mm (uzunluk) x 2.280 mm (genişlik) x 2.710 mm (yükseklik)
3
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
Paletler:
Pendulum tipi B2 paletler, 450mm genişlik
Terazi için ayaklara gerek yok (hızlı kurulum)
Uzaktan kumandalı hareket (opsiyonel)
Hız 2.5 km/s – Tırmanma 20°
Bağımsız palet çalışma açıları +18° / -15°
Morsetsiz gemi konteynırına sığar
4
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
Güç Ünitesi:
Deutz TCD 2012 L06 2V, Tier III
147 kW güç @ 2.300 RPM
Yakıt tüketimi +/- 29 l/s (tam yükte)
Yakıt tankı 260 l kapasiteli
10-18 saatlik vardiyalar için uygun
Canbus motor kontrolleri
Yük hassasiyetli ana pompalar debi; 300 l/dk ve 95 l/dk
Basınç; 250 bar, yardımcı pompalar debi; 40 l/dk
ve 25 l/dk
25 kW hidrolik yağ soğutucu
Motor ses geçirmez bölümde
Motor ve hidrolik aksam için ön ısıtma (opsiyonel)
5
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
Kule :
10 t kapasiteli hidrolik dişli kule
(piston opsiyonel)
Hareketli kule
Kule uzunluğu 6.000 mm (2 bölüm: 4.5m ve 1.5m)
100 kN çekme gücü / 100 kN basma gücü
Tij indirme ve çekme hızları 50 m/dk
Tij besleme boşluğu 4.3 m ve 3.6 m (çift kafalı morset)
4 ve 3m’lik tij ve muhafazalarla çalışma imkanı
Jet-grout uygulamları için kulenin 18 m’ ye uzatılma imkanı
1.200 mm kule boşluğu
6
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
Kule :
Hareketli
Baş-yukarı delgi +20°
7
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
Kulr:
Palet aksıyla 90⁰ delgi aksı imkanı
Kule çalışma açısı +50° / -10°
Ekseni etrafında pistonlu idrolik sistemiyle dönme
Ekseni etrafında dönme açısı +/- 30° (soldan sağa)
İki adet ve özel mafsallarla rotasyon +/- 90°
Kule kızak kaydırma kolaylığı 1200 mm
8
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase
TM
102
Kule:
9
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
Morsetler & Drifterlar:
400mm aralıklı tek ve çift kafalı morset
Tork 26,000 Nm, ani tork 900 Nm
Tek kafalı drifterlar (HB60)
Morset HR60 veya RH3200
Tek ya da çift kafalı morsetlerde
yana kaydırma opsiyonu
10
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
Tij sıkma ve sökme çeneleri:
Standart 220mm çaplı, sabit çene ve frenler
Opsiyonel:
254mm Ø saran çeneler
345mm Ø saran çeneler
305mm Ø sabit çeneler
406mm Ø merkezleyici için ayarlama
Saran çeneler sökme takma sırasındaki tij aşınmalarını önler
11
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
Kontrol Paneli :
İki noktadan şaseye titreşim
önleyici kollarla bağlantı
Bütün delgi parametreleri için
hassas kontrol seçenekleri
Standart olarak asıl ve yedek
basınç valfleri
Su başlığı kontrollerine kolay erişim
Üretimden önce müdahale ile yeniden
dizayn edilebilme opsiyonu
12
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
Opsiyon I:
2.7 t yükleme vinci; çalışma yüksekliği 5.7 m
(kulenin hareketleri ile kısıtlıdır)
DTH yağlama pompası 20 l tank, maks basınç 25 bar
DTH toz pompası maks 200 bar / 30 l/dk
(basınçlı temizleyicisiyle beraber)
Kaynak ve elektrik ihtiyaçları için jeneratör 6.5 kVA
(230V and 400V)
Çelik palet zinciri için lastik ayaklar
9 kN’ luk vinç; maks halat çapı 8mm, uzunluğu 40m ve cathead
(manuel rotasyon)
20 kN kN’ luk vinç; maks halat çapı 10mm, uzunluğu 50m ve
cathead
(manuel rotasyon veya hidrolik rotasyon ve hidrolik telescobik uzatma)
13
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
Opsiyon II:
Gamma su pompaları
Hidrolik tahrikle çalışır
190 l/min 50 bar
100 l/min 50 bar
60 l/min 50 bar
Diğer seçenekler
Işıklandırma 4 x 55 kW
Uzaktan kumanda (sürüş ve ya delgi ve sürüş için)
Jet grouting paketi (kule uzatma, hidrolik kovan, hidrolik
modifikasyonlar) hidrolik silindirli kuleler için mümkündür.
Çevreye zararı olmayan hidrolik yağ
Motor ve hidrolik aksam için ön ısıtma
14
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
Hidrolik aksam:
Yük hassasiyetli, aşırı ısınmaları önleyen güvenlik, ekstra motor kullanımının azaltılması
Hidrolik aksamın ve yağın ömrünün uzatılması için düşük çalışma sıcaklığı
Debi, basınç ve sıcaklığın optimizasyonu için uygun çaplı hidrolik hortumlar
Uzun ömürlü, 4-7 kat çelik sarmallı, yüksek basınca dayanıklı hidrolik hortumlar
Pompa, kontrol vanaların korunması ve kolay bakım için iç filtre sistemi
Uzun hidrolik motor ömrü için ön-yük pompası
15
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
Servis & Bakım :
Yüksek kalitede ve kolay bulunabilir hidrolik aksam
Boart Longyear Service Grup yerinde tamir & bakım teknisyenleri
Dünya çapında ihtiyaçları karşılamak için Boart Longyear yedek parça
güvencesi
16
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase 102
DeltaTools:
Operasyonlar için komple ekipman:
Kazık
Ankraj
Jet Grout
Jeotermal sondajlar
Darbeli sondaj tijlerinde patentli twindrive diş teknolojisi
17
Products & Equipment
25 March 2009
© 2007 Boart Longyear. All rights reserved.
DeltaBase
TM
102
Sondaj Makineleri
© 2008 Boart Longyear. All rights reserved.
DeltaBase 102
Technical Data Sheet
Page 1 of 6
Release Date: Sept 16th 2008
PRODUCT OVERVIEW
The DeltaBase 102 Anchor drill rig for
double-head drilling systems,
rotary / percussion operations is specially
designed for the following key capabilities:
• Rock drills up to We = 850 (Nm)
• Rotary heads up to M = 2,600 (Nm)
• Double head drilling units: Rotary / Rotary,
Rotary / Percussion
• Hydraulic clamping and breaking system
up to max. 345 mm
The main advantages of the DeltaBase 102 are:
• Compact design
• Modern loadsensing hydraulic
• Highest coordination between equipment technology and drill technology
TECHNICAL SPECIFICATIONS
US CUSTOMARY SYSTEM
METRIC SYSTEM
U.S. CUSTOMARY SYSTEM
PRIME MOVER
Standard
DEUTZ TCD 2012 L06 2V, Tier III
Diesel
Fuel
202 g/kWh
Fuel Consumption
Maximum Power
147 kW @ 2.300 rpm
24V
Electrical Circuit
Fuel Tank Capacity
197 hp @ 2,300 rpm
260 l
68 gal
HYDRAULIC SYSTEM
Pump
Variable load-sensing with torque control
Maximum Flow, Q1
300 l/min
80 gpm
Maximum Flow, Q2
95 l/min
26 gpm
Maximun Pressure
250 bar
3,625 psi
Gear Pump
Flow, Q3
40 l/min
10.56 gpm
Flow, Q4
25 l/min
6.6 gpm
Oil Tank Capacity
Oil Cooler Capacity
450 l
25 kW
Boart Longyear is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
119 gal
34 hp
Copyright © Boart Longyear 2008
DeltaBase 102
Technical Data Sheet
Page 2 of 6
Release Date: Sept 16th 2008
TECHNICAL SPECIFICATIONS
METRIC SYSTEM
U.S. CUSTOMARY SYSTEM
ROTARY UNITS
Maximum Torque
up to 26 kNm
up to 18,800 lb-ft
up to 26 kNm
up to 18,800 lb-ft
up to 26 kNm
up to 18,800 lb-ft
DRIFTERS
Maximum Torque
DOUBLE HEAD DRILLING UNITS
Maximum Torque
UNDERCARRIAGE
Type
Pad Width
B2 Crawler mounted oscillating steel tracks
450 mm
18 in
+180 / -150
Oscillating
Driving Speed Low Gear
2,5 km/h
1.55 mph
37% (~20 )
0
Max. Grade Ability Low Gear
(without added winch)
DRILL MAST AND FEED SYSTEM
With feed gear system
Drill Mast
Feed Stroke Lenght, Double Head
3,600 mm
12 ft
Feed Speed - down
15 m/min
49 ft/min
Fast Feed Speed - up
50 m/min
164 ft/min
Fast Feed Speed - down
50 m/min
164 ft/min
Pull Force - down
100 kN
22,470 lbf
Pull Force - back
100 kN
22,470 lbf
Optional Drill Mast Feed
Hydraulic Cylinder
ROD CLAMPS
Maximum Diameter
Clamping Sizes
Maximum Holding Force
Break Out Torque, Maximum Torque
Clamp Jaw Style
Centralizer Insert Size (Standard)
220 mm
8.6 in
from Ø50 to Ø220 mm
from Ø1.9 to Ø8.6 in
120 kN
24 kNm - 14 kNm
27,000 lbf
17,700 lb-ft - 10,300 lb-ft
Fixed
76, 89, 102, 108, 114, 133, (152), 178, 220 mm
3, 3.5, 4, 4.25, 4.5, 5.25, (6), 7, 8.67 in
Boart Longyear is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
Copyright © Boart Longyear 2008
DeltaBase 102
Technical Data Sheet
Page 3 of 6
Release Date: Sept 16th 2008
TECHNICAL SPECIFICATIONS
METRIC SYSTEM
U.S. CUSTOMARY SYSTEM
SOUND LEVEL
106 dB(A)
Sound Pressure Level
OPTIONAL EQUIPMENT
ROD CLAMPING / BREAKING SYSTEMS
254 mm Pivoting Jaw System
Max. Clamp Diameter
Clamping Range
Max. Holding Force
Max. Break Out Torque
254 mm
10 in
60 mm - 254 mm
2.4 in - 10 in
196 kN
44,045 lbf
28 kNm
20,600 lbf-ft
Pivoting Jaws
Clamp Jaw Style
345 mm Pivoting Jaw System
Max. Clamp Diameter
Clamping Range
Max. Holding Force
Max. Break Out Torque
345 mm
13.6 in
60 mm - 345 mm
2.4 in - 13.6 in
196 kN
44,000 lbf
36 kNm
26,500 lbf-ft
Pivoting Jaws
Clamp Jaw Style
305 mm Fixed Jaw System
Max. Clamp Diameter
Clamping Range
Max. Holding Force
Max. Break Out Torque
Clamp Jaw Style
Centralizer Insert Size (Standard)
305 mm
12 in
50 mm - 305 mm
1.9 in - 12 in
235 kN
40 kNm - 26 kNm
52,800 lbf
29,500 lbf-ft - 19,000 lbf-ft
Fixed
76, 89, 102, 108, 114, 133, (152), 178, 220, 254, 305 mm
3, 3.5, 4, 4.25, 4.5, 5.25, (6), 7, 8.67, 10.4, 12, 13.6 in
Boart Longyear is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
Copyright © Boart Longyear 2008
DeltaBase 102
Technical Data Sheet
Page 4 of 6
Release Date: Sept 16th 2008
TECHNICAL SPECIFICATIONS
METRIC SYSTEM
U.S. CUSTOMARY SYSTEM
WATER PUMP
Gamma Pump 202 TS
Pump type
Flow
Pressure
200 l/min
52 gpm
55 bar
800 psi
1½” G female
Suction hose connection on rig
Gamma Pump 200 TS
Pump type
Flow
Pressure
100 l/min
26 gpm
50 bar
725 bar
1½” G female
Suction hose connection on rig
Gamma Pump 62 CC
Pump type
Flow
60 l/min
Pressure
50 bar
16 gpm
725 psi
1½” G female
Suction hose connection on rig
WINCH AND CAT HEAD
PL2
Winch type
Maximum pull on inner layer
Line speed
Cable diameter
Cable length
9 kN
2,000 lbf
50 m/min
164 ft/min
8 mm
0.31 in
40 m
131 ft
Fixed position
Winch Cat Head Pully System
Manually Rotation +/- 450
Optional
Winch Cat Head Pully System
BG6
Winch type
Maximum pull on inner layer
20 kN
Line speed
40 m/min
131 ft/min
Cable diameter
11 mm
0.4 in
Cable length
35 m
115 ft
Boart Longyear is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
4,400 lbf
Copyright © Boart Longyear 2008
DeltaBase 102
Technical Data Sheet
Page 5 of 6
Release Date: Sept 16th 2008
TECHNICAL SPECIFICATIONS
METRIC SYSTEM
U.S. CUSTOMARY SYSTEM
WINCH AND CAT HEAD
BG8
Winch type
Maximum pull on inner layer
35 kN
7,800 lbf
Line speed
35 m/min
115 ft/min
Cable diameter
13 mm
0.5 in
Cable length
50 m
164 ft
Fixed
Cat Head (BG6 and BG8)
All winches: Telescopic and Rotation
Cat Head Hydraulically Adjustable
+/- 450
Rotation
400 mm
Telescopic
15.7 in
combination with hydraulic cathead by lifting magnet and key
Rod Handling System
OIL LINE LUBRICATOR FOR DTH DRILLING
Tank Capacity
20 l
5.3 gal
Max. Pressure
25 bar
363 psi
HIGH PRESSURE WASHER
Dynaset HPW 200 / 30
High Pressure Washer Type
30 l/min
Tank Capacity
7.9 gpm
200 bar
2,900 psi
Loading Force
2,7 mto
19,500 lb-ft
Loading Reach
5.700 mm
Max. Pressure
LOADING CRANE
18.7 ft
COLD WATER PACKAGE
For operating conditions below -150 C (50 F)
Engine and Hydraulics Pre-Heating
OPTIONAL ACCESSORIES
Night Lights
4 pcs x 55 Watts
Rubber Crawler Pads
46 pieces
Radio Remote Control
Driving functions / driving and drilling functions
Environmental Oil in Hydraulic System
Boart Longyear is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
Copyright © Boart Longyear 2008
DeltaBase 102
Technical Data Sheet
Page 6 of 6
Release Date: Sept 16th 2008
DIMENSIONS AND WEIGHTS*
WEIGHT
Dry Weight =
15.400 kg (33,950 lb)
Consisting of:
DEUTZ TCD 2012 L06 2V power unit group 6 cylinder
Hydraulic module
24 V DC electrical system
Variable piston pump with load sensing and torque control
Clamping and breaking device for max. ø220 mm casing
Rotary head / hydraulic drifter / double head drilling unit
Climbing capacity, without add. winch Crawler
Electric operator controls
Grade ability 37%, approx. 200
Towing coupling on rig end
MEASUREMENTS
Lenght = 7170 mm
Height (transport pos.) Max.= 2710 mm
Width = 2280 mm
* Dimensions and weights may vary depending on options and should be checked before starting an operation.
Boart Longyear is constantly striving to improve its products and must therefore, reserve the right to change designs, materials, specifications and price without notice.
Copyright © Boart Longyear 2008