Products
Transkript
Products
Hakkımızda 1970 yılında M. Emin Taşçı tarafından İstanbul - Sirkeci'de kurulan, Emin Teknik, hidrolik hortum rakorları üretimi ve montajı konusunda faaliyet göstermeye başladı. 1992 yılında yönetimi ikinci kuşak Bülent Taşçı’nın devralmasıyla şirket merkezi İstanbul - Levent’e taşındı ve ürün yelpazesine sert lehim yöntemiyle başlıklı metal flex hortum, klima adaptörleri üretimi ve kaplama prosesi de eklenerek faaliyet konuları genişledi. 2003 yılında üretim alanı 750 m² den 2500 m² ye genişledi 2004 yılında ilk Flex hortum makinesi üretimine başlandı. 2005 yılında 8.500 m² kapalı olmak üzere toplam 14.000 m² lik alanda kurulu Aydınlı-Tuzla’daki kendi fabrikasına taşındı. 2006 yıllında ihracat genişledi. Flex hortum makineleri, Flex Hortum Örme makineleri ve flex hortumları dünyanın birçok ülkesine ihraç etmeye başladı. 2008 yılında sıcak dövme prosesi hattı kuruldu. Bu hatta demir yolları için tirfon, krapo blonu, cebire blonu, cıvata vb. bağlantı elemanları üretimine geçildi. 2009 yılında metal körük ve kompansatör üretimine başlandı. 2012 yılında, dövme sektöründe ürün yelpazesi genişletilerek 0,5 kg ile 60 kg arasındaki parçalara sıcak şekil verecek çelik dövme tesisi kuruldu. Başarılı çalışmalarını kaliteden ödün vermeden devam ettiren Emin Teknik, deneyimli ve eğitimli personeli, geniş makine parkuruyla yurt içi ve yurt dışındaki faaliyet alanlarını genişletmeye devam etmektedir. Emin Teknik Ltd. Şti. hâlihazırda Tuzla ve Silivri’de bulunan toplam dört adet fabrikasında yaklaşık 300 kişinin üzerinde çalışanıyla 15.000 m² kapalı olmak üzere toplam 25.000 m² alanda faaliyet göstermektedir. Emin Teknik Ltd. Şti. ISO 9001:2008 sistem ve TSE olmak üzere birçok kalite belgesine sahiptir. About 1970-Emin Teknik is founded in Istanbul by Emin Tasci to operate in manufacturing and assembly of hydraulic fittings. 1992-Bulent Tasci who takes over the management as being the second generation, moves the headquarter to Levent / Istanbul and the company’s field of activities are expanded by adding production of metal flex hose assemblies, adapters for air conditioning systems and coating process. 2003-Emin Teknik expands its production area from 750 m² to 2500 m². 2004-Emin Teknik starts to produce flexible hose machines. 2005-Emin Teknik moves into its own factory located in Tuzla / Istanbul, having a total area of 14.000 m² with 8.500 m² closed production area. 2006-Emin Teknik expands its foreign trade activities by starting to export Flex Hose Production Lines, Braiding Machines and flexible metal hoses to various countries, nearly all over the World. 2008-Emin Teknik takes hot forging line into operation for the production of railway fasteners such as sleeper screws, T-Bolts and fishplate bolts. 2009-Emin Teknik starts to the production of metal bellows and expansion joints. 2011-Emin Teknik incorporates another hot forging plant to form parts between 0,5-60 kg. in order to meet increasing demand in the forging industry. Emin Teknik Co. Ltd. continues to grow its business with an increasing success while not compromising quality. Company expands its field of activities both in domestic and international markets by its experienced and trained staff as well as its extensive machinery park. Today Emin Teknik Co. Ltd. is operating in a total of 4 production facilities located in Tuzla and Silivri and employs over 300 people, having a total indoor production area of 15.000 m² to meet future growth. Emin Teknik Co. Ltd. products and services are approved with many quality certificates including ISO 9001:2008, TSE, DVGW, UL and GOST-R. www.eminteknik.com 1 İNDEKS / INDEX I. Emin Teknik Hakkında / About Emin Teknik 1 II. Üretim Teknolojimiz / Production Technology 3 III. Ürünlerimiz / Products 6 1- Makine Üretimi / Machinery Production 7 2- Flex Hortum Üretimi / Flexible Metal Hose Production 11 3- Kompansatör / Expansion Joints 41 4- Demiryolu Ray Bağlantı Elemanları / Railway Fasteners 65 5- Özel Dövme Ürünleri / Special Forging Products 71 IV. Kalite Kontrol ve Stok Alanları / Quality Control and Stock Areas 77 V. Teknik Bilgiler / Technical Informations 81 II. Üretim Teknolojimiz Our Production Technology 1- Talaşlı İmalat / Machining 2- Soğuk Şekil Verme / Cold Forming 3- Sıcak Şekil Verme / Hot Forming 4- Kaynak & Sert Lehim / Welding & Brazing 5- Yüzey Kaplama / Surface Coating 6- Diğer Makineler / Other Machinery 1- Talaşlı İmalat - Şerit Testere (Max Ø280 mm) - Revolver Torna (Max Ø60 mm) - Üniversal Torna (Max Ø650 mm) - CNC Torna (Max Ø400 mm) - Sütunlu Matkap (Max Ø42 mm) - Üniversal Freze ( X: 1020 mm Y: 510 mm Z: 630 mm ) - CNC Dikey İşleme Merkezi ( X: 1020 mm Y: 510 mm Z: 630 mm ) - Wagner Diş açma makinesi ( M16 – M33 ) - Tel Erezyon ( X: 550 mm Y: 350 mm Z: 300 mm ) - Dalma Erezyon ( X: 1020 mm Y: 510 mm Z: 630 mm ) 1- Machining - Band Saw (Max Ø280 mm) - Revolver Lathe (Max Ø60 mm) - Universal Lathe (Max Ø 650mm) - CNC Lathe (Max Ø 400mm) - Pillar Drill (Max Ø42 mm) - Universal Milling Machine (X:1020mm Y:510mm Z:630mm) - CNC Vertical Machining Center (X:1020mm Y:510mm Z:630mm) - Wagner Threading Machine (M16 - M33) - Wire EDM (X: 550 mm Y: 350 mm Z: 300 mm) - Sinker EDM (X: 1020 mm Y: 510 mm Z: 630 mm) 2- Soğuk Şekil Verme - Flex Hortum Üretim Makineleri ( DN06 – DN100 ) - Boru Bükme Tezgahları ( Max Ø34 x 2 ) - Giyotin Makas (Max Kalınlık 6 mm ) - Kompansatör Üretim Hattı ( Max Ø1500 mm) - Eksantrik Presler (Max 150 Ton) - Soğuk Ovalama ( M10 – M33 ) 2- Cold Forming - Flex Hose Production Lines (DN06-DN100) - Pipe Bending Machines (Max Ø34x2) - Guillotine Shear (Max Thickness 6 mm) - Expansion Joints Production Lines(max Ø 500mm) - Eccentric Presses (Max 150 Mt) - Cold Rolling Machine (M10 - M33) 3- Sıcak Şekil Verme - Friksiyon Presleri ( 250 - 1000 ton ) - Lasco Presleri KJ 6300 - Eksantrik Pres (Max 150 Ton) - Sıcak Ovalama ( Min Ø22 “M22”) 3- Hot Forming - Friction Presses (250 - 1000 Mt) - Lasco Press KJ 6300 - Eccentric Presses (Max 150 Mt) - Hot Rolling Machine (Min Ø22 "M22") 4 www.eminteknik.com 4- Kaynak & Sert Lehim - Elektrik Ark Kaynağı - Tig Kaynağı ( 0,13 mm – 10 mm ) - Mig Kaynağı ( 0,8 mm – 10 mm ) - Sert Lehim ( Oksi-Asetilen “Gümüş – Sarı – Bakır) 4- Welding & Brazing - Electrowelding - TIG welding - MIG welding - Brazing (oxyacetylene, silver, copper) 5- Yüzey Kaplama - Elektrolitik Çinko Kaplama - Elektrolitik Nikel Kaplama - Akımsız Nikel Kaplama - Akımsız Çinko Kaplama - Siyah Oksidasyon - Elektropolisaj 5- Surface Coating - Electrolytic Zinc Plating - Electrolytic Nickel Plating - Electroless Nickel Plating - Electroless Zinc Plating - Black Oxidation - Electropolishing 6- Diğer Makineler - Hortum Örgü Makineleri (Max DN100) - Lazerli Markalama Cihazı ( 100 x 100 mm ) - Mekanik Çekme & Eğme Tezgahı ( Max 200 KN ) 6- Other Machinery - Flexible Hose Braiding Machines (Max DN100) - Laser Marking Equipment (100 x 100 mm) - Mechanical Tensile & Bending Machine (Max 200 KN) www.eminteknik.com 5 III. Ürünlerimiz Products 1- Makine Üretimi / Machinery Production 2- Flex Hortum / Flexible Metal Hose 3- Kompansatör / Expansion Joints 4- Demiryolu Ray Bağlantı Elemanları / Railway Fasteners 5- Özel Dövme Ürünleri / Special Forging Products 1- Makine Üretimi / Machinery Production a- Flex Hortum Üretim Hattı / Flex Hose Production Line b- Fitting Kaynak Makinesi / Fitting Welding Machine c- Paketleme Makinesi / Packaging Machine d- Örgü Makinesi / Braiding Machine www.eminteknik.com a- Flex Hortum Üretim Hattı / Flex Hose Production Line Flex Hortum Üretim Hattı Uzunlukları ve Üretim Kapasiteleri Length & Production Speeds of Flex Hose Production Lines (M00 662 000) Nominal Çap Hat Uzunluğu Üretim Hızı Nominal Diameter Length of The Line Production Speed DN06 DN08 DN10 DN12 DN16 DN20 DN25 1⁄4’’ 5/16’’ 3/8’’ 1/2’’ 5/8’’ 3/4‘’ 1’’ 14 mt 35 mt/h 40 mt/h 45 mt/h 60 mt/h 65 mt/h 65 mt/h 65 mt/h (M00 663 000) Nominal Çap Hat Uzunluğu Üretim Hızı Nominal Diameter Length of The Line Production Speed DN32 DN40 DN50 1-1/4’’ 1-1/2’’ 2’’ 16 mt 70 mt/h 75 mt/h 80 mt/h (M00 664 000) Nominal Çap Hat Uzunluğu Üretim Hızı Nominal Diameter Length of The Line Production Speed DN65 DN80 DN100 2-1/2’’ 3’’ 4’’ 21 mt 60 mt/h 60 mt/h 60 mt/h Mentioned values are optimum speeds in continuous running of the machines. 8 www.eminteknik.com b- Fitting Kaynak Makinesi / Fitting Welding Machine c- Paketleme Makinesi / Packaging Machine www.eminteknik.com 9 d- Örgü Makinesi / Braiding Machine Flex Hortum Örgü Makinesi: 24, 32, 48 ve 64 kuklalı makineler olup maksimum örgü çapı 4” Örme Hızı: 1 mt/dakika 10 www.eminteknik.com Flex Hose Braiding Machine: Braiding machines with 24, 32, 48 and 64 carriers and maximum diameter of 4" Braiding speed: 1 m/min 2- Flex Hortum / Flexible Metal Hose a- Paralel Boğumlu Metal Flex Hortum Üretimi (Kangal) / Annular Corrugated Flexible Metal Hose Production (Coils) b- Başlıklı Flex Hortumlar (Bağlantı Tipe Göre) / Flexible Hose Assemblies ( Acc. to the Connection Type ) c- Başlıklı Hortumlar (Uygulama Alanına Göre) / Flexible Hose Assemblies Production (Acc. to Application Area) d- Diğer Özel Başlıklı Hortumlar ve Armatürler / Special Hose Assemblies and Fitting www.eminteknik.com a- Paralel Boğumlu Metal Flex Hortum Üretimi (Kangal) / Annular Corrugated Flexible Metal Hose Production (Coils) Esnek Metal Hortumlar Paslanmaz esnek hortumlar, yüksek sıcaklıklara dayanıklı, kolay bükülebilir yapıya sahip olup boğum şekline göre iki sınıfta değerlendirilir: 1- Helisel boğumlu esnek hortumlar: Hortum üzerindeki boğumlar hortum boyunca helis şeklini alır. Uzamaya karşı direnci yüksektir. 2- Paralel boğumlu esnek hortumlar: Boğumlar hortum eksenine dik ve birbirine göre paralel konumundadır, uzamaya karsı dirençsizdir. Örgüsüz esnek metal hortumlar, rijit bağlantı yapmanın getirdiği zorlukları ortadan kaldırmak amacıyla tasarlanmıştır. Örgülü metal esnek hortumlar, kolay montaj ve titreşim emici özelliğinin yanında basınca dayanıklılığı ve esnek yapısıyla buhar, su, yağ ve gaz bağlantı hatlarında rahatlıkla kullanılır. Esnek metal hortumların kullanım ömrünü etkileyen başlıca faktörler: -Fiziksel dış kuvvetler ve sürtünmeler -Montaj şartları (ön gerilmesiz olmalıdır) -Hareket aralığı -Hareket frekansı Emin Teknik, standart, açık ve kapalı boğum olmak üzere üç tip metal hortum üretmektedir. Hortum Malzeme Yapısı: AISI 304 - AISI 321 ve AISI 316L Paslanmaz Çelik Flex Hortumların Kullanım Alanları: -Isıtma, Soğutma sistemleri -Doğalgaz iletim sistemleri -Kombi, Şofben ve fan coil -Kat kaloriferi radyatör bağlantıları -Kazan bağlantıları -Kimyasal ve petrokimyasal tesisler -Gemi inşası ve sondaj tesisleri -Petrol ve gaz prosesleri -Uçak sanayii -Gıda ve kimya sanayi tesislerinde kullanılmaktadır. Corrugated Metal Flexible Hoses Corrugated flexible metal hoses with their high temperature and resistance and easy bent structures are produced in two different versions depending on the corrugation types. 1- Annular Corrugation : Annular corrugated metal hose is made from longitudinally welded tubing with the corrugations formed in parallel planes veritcal to the axis of the hose. 2- Helical Corrugation : Helical corrugated metal hose is also made from longitudinally welded tubing but with the corrugations formed in helix or spiral relative to the axis of the hose. Flexibility of corrugated metal hoses depends on the profile and the distance between the corrugations as well as the wall thickness. Higher profiles with small distance between the corrugations provide more flexibility. In the same way, reducing the wall thickness also causes an increase in the flexibility, but in this case, the pressure resistance will be reduced. In order to increase the pressure resistance, corrugated metal hoses are reinforced with single or multiple braiding. Braiding does not only prevent longitudinal expansion of the hose caused by interior pressure, but it can also absorb exterior tensile stress and provide protection of the exterior surface of the hose. Corrugated metal hoses can be used in all applications where high flexibility and tightness are required, due to its functional and constructional properties Another advantage of corrugated hoses is the absorption of vibrations. Basing on the mentioned advantages of corrugated metal hoses, they can be extensively used in various industrial applications such as; -Heating & Cooling Systems -Food Industry -Chemical Industry -Boiler & Heat Exchanger -Natural Gas applications Main factors affect the service life of the metal flexible hoses is; -Improper installation -Pressure fluctuations -Quick and intermittent movements -Higher operating temperatures Corrugated metal hoses are normally manufactured in Standart Pitch. In general, each manufacturer specifies a standart number of corrugation per meter based on their own specifications considering the acceptable flexibility. Open Pitch hoses have fewer corrugations per meter than the standart pitch hoses. This hose will not be as flexible as a standart pitch hose and can be used in applications where the flexibility is not particularly noteworthy. Main application area of open pitch hoses is boiler & solar systems. Close Pitch hoses have high flexibility due to their increased number of corrugations per meter. 12 www.eminteknik.com ı- Standart Hatve Paralel Boğumlu Hortum / Standart Pitch Annular Corrugated Flex Hose EMINFLEX Annular Corrugated Flex Hoses Standart Pitch EMINFLEX Paralel Boğumlu Esnek Metal Hortum DN D1 6 6,3 9,6 8 8,4 12,2 10 10,1 14,2 Product Code E06 141 006 015 E06 151 006 015 E06 141 008 015 E06 151 008 015 E06 141 010 015 E06 151 010 015 E06 141 012 015 E06 151 012 015 E06 141 016 018 E06 151 016 018 E06 141 020 018 E06 151 020 018 E06 141 025 020 E06 151 025 020 E06 141 032 022 E06 151 032 022 E06 141 040 025 E06 151 040 025 E06 141 050 025 E06 151 050 025 E06 141 065 030 E06 151 065 030 E06 141 080 030 E06 151 080 030 E06 141 100 040 E06 151 100 040 Premissible One Frequent Operating Bending Bending D, D1, D2 Pressure at Process Process Tolerance 20°C (mm) (mm) (mm) (mm) (mm) (mm) (Bar) D 12 12,4 16,7 16 16,4 21,9 20 20,3 26,7 25 25,4 32,4 32 33,8 41,2 40 39,8 49,5 50 50,2 60,3 65 63 76,5 80 80 96 100 99 115 D2 15 10,6 25 16 13,2 32 18 15,4 38 20 17,7 45 28 23,3 58 32 28,2 70 40 33,7 85 50 43 105 60 51,4 130 70 62 160 115 80 200 130 98 240 160 118 290 80 124 130 ±0,25 140 160 170 190 260 ±0,30 300 320 ±0,50 460 660 ±0,60 750 Weigth (Approx) (kg/m) 24 0,060 150 0,140 15 0,080 112 0,160 10 0,095 97 0,195 9 0,112 75 0,228 7 0,171 60 0,350 4 0,219 62 0,453 3 0,327 43 0,595 2,5 0,476 46 0,922 2,5 0,570 42 1,222 1,6 0,700 32 1,380 1 1,250 35 2,230 1,6 1,450 35 2,890 1,5 2,600 25 4,320 www.eminteknik.com 13 ıı- Açık Hatve Paralel Boğumlu Hortum / Open Pitch Annular Corrugated Flex Hose (For Solar Technic and Boilers) EMINFLEX Annular Corrugated Flex Hoses Open Pitch EMINFLEX Açık Boğumlu Esnek Metal Hortumlar DN D1 6 6,3 9,6 8 8,4 12,2 10 10,1 14,2 Product Code E06 142 006 015 E06 152 006 015 E06 142 008 015 E06 152 008 015 E06 142 010 015 E06 152 010 015 E06 142 012 015 E06 152 012 015 E06 142 016 018 E06 152 016 018 E06 142 020 018 E06 152 020 018 E06 142 025 020 E06 152 025 020 E06 142 032 022 E06 152 032 022 E06 142 040 025 E06 152 040 025 E06 142 050 025 E06 152 050 025 14 Premissible One Frequent Operating Bending Bending D, D1, D2 Pressure at Process Process Tolerance 20°C (mm) (mm) (mm) (mm) (mm) (mm) (Bar) D 12 12,4 16,7 16 16,6 21,4 20 20,4 26,1 25 25,6 31,8 32 34,0 40,8 40 40,1 49,0 50 50,8 59,8 D2 15 10,3 25 16 12,9 32 18 15,0 38 20 17,3 45 28 22,8 58 32 27,8 70 40 33,3 85 50 42,6 105 60 51,0 130 70 61,5 www.eminteknik.com 160 80 124 130 ±0,25 140 160 170 190 260 ±0,30 300 320 ±0,50 Weigth (Approx) (kg/m) 65 0,050 150 0,125 38 0,062 112 0,160 15 0,080 97 0,195 16 0,091 75 0,228 11 0,141 60 0,350 9 0,194 62 0,453 7 0,234 43 0,595 4 0,370 46 0,922 3,5 0,535 42 1,222 1,6 0,700 32 1,380 ııı- Kapalı Hatve Paralel Boğumlu Hortum / Close Pitch Annular Corrugated Flex Hose EMINFLEX Annular Corrugated Flex Hoses Close Pitch EMINFLEX Kapalı Boğumlu Esnek Metal Hortumlar DN D1 6 6,1 9,5 8 8,2 12,4 10 10,1 14,2 Product Code E06 143 006 015 E06 153 006 015 E06 143 008 015 E06 153 008 015 E06 143 010 015 E06 153 010 015 E06 143 012 015 E06 153 012 015 E06 143 016 018 E06 153 016 018 E06 143 020 018 E06 153 020 018 E06 143 025 020 E06 153 025 020 E06 143 032 022 E06 153 032 022 E06 143 040 025 E06 153 040 025 E06 143 050 025 E06 153 050 025 E06 143 065 030 E06 153 065 030 E06 143 080 030 E06 153 080 030 E06 143 100 040 E06 153 100 040 Premissible One Frequent Operating Bending Bending D, D1, D2 Pressure at Process Process Tolerance 20°C (mm) (mm) (mm) (mm) (mm) (mm) (Bar) D 12 12,4 16,7 16 16,2 21,7 20 20,2 26,6 25 25,2 32,5 32 33,6 41,2 40 40 49,6 50 49,7 60,5 65 63 76,5 80 80 96 100 99 115 D2 20 10,5 25 25 13,4 30 30 15,4 35 35 17,7 40 40 23,2 50 50 28,3 55 60 33,8 65 70 43 75 80 51,5 90 100 62,2 110 145 80 200 200 98 240 240 118 290 70 90 100 ±0,25 110 120 130 150 230 ±0,30 240 260 ±0,50 300 500 ±0,60 600 Weigth (Approx) (kg/m) 16 0,060 150 0,140 12 0,080 112 0,160 7 0,095 97 0,195 5 0,112 75 0,228 5 0,171 60 0,350 3 0,219 62 0,453 2,5 0,425 43 0,860 2 0,605 46 1,130 1,6 0,860 42 1,530 1 0,985 32 1,665 0,4 2,180 16 3,580 0,3 3,300 10 4,900 0,3 4,100 10 5,900 www.eminteknik.com 15 Örgü Konfigürasyonu / Braid Configuration Standart olarak esnek hortum üzerine AISI 304 paslanmaz çelik tel örgü yapılmaktadır. Müşteri isteği üzerine çift kat ve değişik konfigürasyonda da üretim yapılabilmektedir. Hortumda tel örgü, yüksek iç basınç nedeniyle hortumun boylamasına uzamasını engelleyerek daha yüksek basınçta çalışma yeteneği sağlamaktadır. Metal hortum ve örgünün aynı malzemeden üretilmesi mümkünse de, korozyon önleyici ve ekonomik nedenlerden dolayı farklı malzemeden de üretilirler. Örgü için genellikle AISI304 malzeme kullanılmaktadır. Örgü sayısı istenen basınç ile orantılıdır. Basınç direncini arttırmak için örgü kat sayısı arttırılabilir. Örgü parametreleri: kukla sayısı, her gruptaki tel sayısı ve tel çapıdır. SS 304 is our common braiding on flexible hoses and double braiding or different configurations are possible upon customer’s demands. Metal wire braid on hose assembly provides the hose a higher pressure capability by preventing longitudinal expansion of the hose caused by high interior pressure.Though it is possible, both the wire braiding and the corrugated hose can be made of using the same basic material, because of corrosion protection and economical reasons, two different materials can also be used. In general AISI304 material is used for wire braiding. The number of braidings depends on the required pressure. To increase the pressure resistance, they can be reinforced with single or multiple braidings. Construction of the braid is specified as (no. of carriers) x (no. of wires in each group) x (wire diameter). EMINFLEX Esnek Hortumlarda Örgü Konfigürasyonları Braid Configuration Of EMINFLEX Flexible Hose Hortum Çapı Hose Sizes 16 Tel Çapı Wire Diameter (mm) Tel Sayısı No. of Wires Kukla Sayısı No. of Carriers DN 06 Ø 0,22 7 24 DN 08 Ø 0,22 8 24 DN 10 Ø 0,24 9 24 DN 12 Ø 0,24 10 24 DN 16 Ø 0,28 10 24 DN 20 Ø 0,30 9 36 DN 25 Ø 0,30 9 36 DN 32 Ø 0,38 8 48 DN 40 Ø 0,40 9 48 DN 50 Ø 0,40 10 48 DN 65 Ø 0,45 9 48 DN 80 Ø 0,45 11 64 DN 100 Ø 0,50 11 64 www.eminteknik.com b- Başlıklı Flex Hortum (Bağlantı Çeşitlerine Göre) / Flexible Hose Assemblies (Acc. to the connection types) Başlıklı Hortum Siparişlerinde hortumun malzeme cinsi, nominal çapı, nominal boyu, başlık tipi, başlık malzemesi ve çalışma sıcaklığı açık bir şekilde belirtilmelidir. When ordering, connection types, nominal diameter, operating temperature & pressure and materials for both flexible hose and connections should be specified. www.eminteknik.com 17 ı- Kaynak Boru Bağlantı / Pipe Connection Kaynak Boru Bağlantı / Pipe Connection Hortum Çapı Pipe ( D x s ) ( mm ) a ( mm ) Sleeve (d x s1 x b ) ( mm ) E06 161 106 2NL DN 06 8 x 1,0 30 14 x 1,5 x 10 E06 161 108 2NL DN 08 10 x 1,5 30 16 x 1,5 x 10 E06 161 110 2NL DN 10 12 x 1,5 30 19 x 1,5 x 10 E06 161 112 2NL DN 12 15 x 1,5 30 22 x 1,5 x 20 E06 161 116 2NL DN 16 18 x 1,5 40 28 x 2,0 x 20 E06 161 120 2NL DN 20 22 x 1,5 40 33 x 2,0 x 25 E06 161 125 2NL DN 25 28 x 1,5 45 38 x 1,6 x 25 E06 161 132 2NL DN 32 35 x 1,5 50 48 x 2,0 x 25 E06 161 140 2NL DN 40 42 x 2,0 50 58 x 2,0 x 40 E06 161 150 2NL DN 50 54 x 2,0 50 69 x 2,0 x 40 Ürün Kodu Product Code 18 Nominal Diameter (DN) www.eminteknik.com ıı- Erkek Rakor / Threaded Connection, Fixed Erkek Rakor / Threaded Connection, Fixed SW Ürün Kodu Product Code Hortum Çapı Nominal Diameter (DN) T a ( mm ) SW ( mm ) E06 161 506 2NL DN 06 1/4" 22 14 E06 161 508 2NL DN 08 1/4" 22 14 E06 161 510 2NL DN 10 3/8” 23 17 E06 161 512 2NL DN 12 1/2" 27 22 E06 161 516 2NL DN 16 1/2" 27 22 E06 161 520 2NL DN 20 3/4" 31 27 E06 161 525 2NL DN 25 1” 33 36 E06 161 532 2NL DN 32 1-1/4” 35 46 E06 161 540 2NL DN 40 1-1/2” 39 50 E06 161 550 2NL DN 50 2” 41 60 www.eminteknik.com 19 ııı- Dişi Rakor / Threaded Connection, Swivel Nut Dişi Rakor / Female Threaded Connection, Swivel SW Ürün Kodu Product Code 20 Hortum Çapı Nominal Diameter (DN) T a ( mm ) SW ( mm ) E06 161 706 2NL DN 06 1/4" 21 19 E06 161 708 2NL DN 08 1/4" 21 19 E06 161 710 2NL DN 10 3/8” 21 22 E06 161 712 2NL DN 12 1/2" 24 27 E06 161 716 2NL DN 16 1/2" 24 27 E06 161 720 2NL DN 20 3/4" 28 32 E06 161 725 2NL DN 25 1” 30 41 E06 161 732 2NL DN 32 1-1/4” 32 50 E06 161 740 2NL DN 40 1-1/2” 35 55 E06 161 750 2NL DN 50 2” 39 65 www.eminteknik.com ıv- Vakum Rakoru / Vacuum Flange Vakum Rakoru / Vacuum Flange Hortum Çapı D ( mm ) d ( mm ) d1 ( mm ) d2 ( mm ) a ( mm ) E06 164 910 5NL DN 10 30,0 12,2 14,0 10,0 5,1 E06 164 916 5NL DN 16 30,0 17,2 19,0 16,0 4,5 E06 164 925 5NL DN 25 40,0 26,2 28,0 25,0 4,6 E06 164 940 5NL DN 40 55,0 41,2 41,0 40,0 4,4 E06 164 950 5NL DN 50 75,0 52,2 53,0 50,0 5,4 Ürün Kodu Product Code Nominal Diameter (DN) www.eminteknik.com 21 v- Sabit Flanş / Flange Connection, Fixed Sabit Flanş ( Tip I ) / Flange Connection, Fixed ( Type I ) 22 Hortum Çapı Nominal Diameter (DN) FLANGE D ( mm ) d0 ( mm ) a ( mm ) E06 166 212 1NL DN 12 PN16 / DIN 2576 95 45 50 E06 166 216 1NL DN 16 PN16 / DIN 2576 105 55 50 E06 166 220 1NL DN 20 PN16 / DIN 2576 105 55 50 E06 166 225 1NL DN 25 PN16 / DIN 2576 115 65 50 E06 166 232 1NL DN 32 PN16 / DIN 2576 140 75 50 E06 166 240 1NL DN 40 PN16 / DIN 2576 150 85 50 E06 166 250 1NL DN 50 PN16 / DIN 2576 165 100 60 E06 166 265 1NL DN 65 PN16 / DIN 2576 185 120 60 E06 166 280 1NL DN 80 PN16 / DIN 2576 200 135 60 E06 166 282 1NL DN 100 PN16 / DIN 2576 220 155 60 E06 166 284 1NL DN 125 PN10 / DIN 2576 250 185 70 E06 166 286 1NL DN 150 PN10 / DIN 2576 285 210 70 E06 166 288 1NL DN 200 PN6 / DIN 2573 320 255 70 E06 166 290 1NL DN 250 PN6 / DIN 2573 375 310 70 Ürün Kodu Product Code www.eminteknik.com vı- Sabit Flanş / Flange Connection, Fixed Sabit Flanş ( Tip II ) / Flange Connection, Fixed ( Type II ) Ürün Kodu Product Code Hortum Çapı Nominal Diameter (DN) FLANGE D ( mm ) d0 ( mm ) a ( mm ) E06 166 412 1NL DN 12 PN16 / DIN 2633 95 45 35 E06 166 416 1NL DN 16 PN16 / DIN 2633 105 58 38 E06 166 420 1NL DN 20 PN16 / DIN 2633 105 58 38 E06 166 425 1NL DN 25 PN16 / DIN 2633 115 68 38 E06 166 432 1NL DN 32 PN16 / DIN 2633 140 78 40 E06 166 440 1NL DN 40 PN16 / DIN 2633 150 88 42 E06 166 450 1NL DN 50 PN16 / DIN 2633 165 102 45 E06 166 465 1NL DN 65 PN16 / DIN 2633 185 122 45 E06 166 480 1NL DN 80 PN16 / DIN 2633 200 138 50 E06 166 482 1NL DN 100 PN16 / DIN 2633 220 158 52 E06 166 484 1NL DN 125 PN10 / DIN 2632 250 188 55 E06 166 486 1NL DN 150 PN10 / DIN 2632 285 212 55 E06 166 488 1NL DN 200 PN6 / DIN 2631 320 258 55 E06 166 490 1NL DN 250 PN6 / DIN 2631 375 312 60 www.eminteknik.com 23 vıı- Yakalı Döner Flanşlı / Flange Connection, Swivel Yakalı Döner Flanşlı ( Tip I ) / Flange Connection, Swivel ( Type I ) Ürün Kodu Product Code 24 Hortum Çapı Nominal Diameter (DN) FLANGE D ( mm ) d0 ( mm ) a ( mm ) E06 166 612 1NL DN 12 PN16 / DIN 2576 95 45 40 E06 166 616 1NL DN 16 PN16 / DIN 2576 105 58 40 E06 166 620 1NL DN 20 PN16 / DIN 2576 105 58 40 E06 166 625 1NL DN 25 PN16 / DIN 2576 115 68 40 E06 166 632 1NL DN 32 PN16 / DIN 2576 140 78 40 E06 166 640 1NL DN 40 PN16 / DIN 2576 150 88 40 E06 166 650 1NL DN 50 PN16 / DIN 2576 165 102 50 E06 166 665 1NL DN 65 PN16 / DIN 2576 185 122 50 E06 166 680 1NL DN 80 PN16 / DIN 2576 200 138 50 E06 166 682 1NL DN 100 PN16 / DIN 2576 220 158 50 E06 166 684 1NL DN 125 PN10 / DIN 2576 250 188 55 E06 166 686 1NL DN 150 PN10 / DIN 2576 285 212 55 E06 166 688 1NL DN 200 PN6 / DIN 2573 320 268 55 E06 166 690 1NL DN 250 PN6 / DIN 2573 375 320 55 www.eminteknik.com vııı- Kaynaklı Flanşlı / Welded Flange Kaynaklı Flanşlı ( Tip II ) / Welded Flange ( Type II ) Hortum Çapı Nominal Diameter (DN) FLANGE D ( mm ) d0 ( mm ) a ( mm ) E06 166 812 1NL DN 12 PN16 / DIN 2576 95 45 40 E06 166 816 1NL DN 16 PN16 / DIN 2576 105 58 40 E06 166 820 1NL DN 20 PN16 / DIN 2576 105 58 40 E06 166 825 1NL DN 25 PN16 / DIN 2576 115 68 40 E06 166 832 1NL DN 32 PN16 / DIN 2576 140 78 40 E06 166 840 1NL DN 40 PN16 / DIN 2576 150 88 40 E06 166 850 1NL DN 50 PN16 / DIN 2576 165 102 50 E06 166 865 1NL DN 65 PN16 / DIN 2576 185 122 50 E06 166 880 1NL DN 80 PN16 / DIN 2576 200 138 50 E06 166 882 1NL DN 100 PN16 / DIN 2576 220 158 50 E06 166 884 1NL DN 125 PN10 / DIN 2576 250 188 60 E06 166 886 1NL DN 150 PN10 / DIN 2576 285 212 60 E06 166 888 1NL DN 200 PN6 / DIN 2573 320 258 60 E06 166 890 1NL DN 250 PN6 / DIN 2573 375 312 60 Ürün Kodu Product Code www.eminteknik.com 25 ı- Gaz Hortumları / Gas Hoses Gaz Hortumları (S/E) / Gas Hoses (F/M) Product Code DN (mm) Fitting M/F T1 – T2 Length (mm) E02 165 112 203 300 E02 165 112 206 E02 165 112 209 600 12 1/2" - 1/2" 900 E02 165 112 210 1000 E02 165 112 212 1200 E02 165 120 203 300 E02 165 120 206 600 E02 165 120 209 16 3/4" - 3/4" 900 E02 165 120 212 1200 E02 165 120 215 1500 E02 165 712 203 250 E02 165 712 206 E02 165 712 208 1/2" - 1/2" 800 E02 165 712 210 1000 E02 165 712 212 1200 E02 165 720 203 250 E02 165 720 206 600 E02 165 720 208 16 3/4" - 3/4" 750 E02 165 720 210 1000 E02 165 720 212 E02 165 312 203 1200 E02 165 312 206 600 E02 165 312 209 E02 165 312 210 300 12 1/2" - 1/2 900 1000 E02 165 312 212 1200 E02 165 312 215 1500 E02 165 320 203 300 E02 165 320 206 600 E02 165 320 209 E02 165 320 210 26 600 12 16 3/4" – 3/4" 900 1000 E02 165 320 212 1200 E02 165 320 215 1500 www.eminteknik.com Hose Type ı- Gaz Hortumları / Gas Hoses Gaz Hortumlerı (S/S) / Gas Hoses (F/F) Product Code DN (mm) Fitting F/F T1 – T2 E02 165 212 203 600 12 1/2" - 1/2" 900 E02 165 212 210 1000 E02 165 212 212 1200 E02 165 220 203 300 E02 165 220 206 600 E02 165 220 209 16 3/4" - 3/4" 900 E02 165 220 212 1200 E02 165 220 215 1500 E02 165 812 203 250 E02 165 812 206 E02 165 812 208 600 12 1/2" - 1/2" 800 E02 165 812 210 1000 E02 165 812 212 1200 E02 165 820 203 250 E02 165 820 206 600 E02 165 820 208 16 3/4" - 3/4" 750 E02 165 820 210 1000 E02 165 820 212 E02 165 412 203 1200 E02 165 412 206 600 E02 165 412 209 E02 165 412 210 300 12 1/2" - 1/2 900 1000 E02 165 412 212 1200 E02 165 412 215 1500 E02 165 420 203 300 E02 165 420 206 600 E02 165 420 209 E02 165 420 210 Hose Type 300 E02 165 212 206 E02 165 212 209 Length (mm) 16 3/4" – 3/4" 900 1000 E02 165 420 212 1200 E02 165 420 215 1500 www.eminteknik.com 27 ı- Gaz Hortumları / Gas Hoses EN 14800 e göre gaz hortumları (Örgülü – PVC Korumalı Gaz Hortumu): EN 14800 normuna uygun olarak imal edilen gaz hortumları, yüksek esnek ve basınca dayanıklı yapıları sayesinde ev aletlerinin bağlantıları için uygundur. Bu hortumlar 0,5 bar ve altında gaz basınçlarına uygun çalışmaktadırlar. Esnek hortum, mekanik yükleri karşılarken, hortumu kaplayan örgü, hortumu dış etkilerden korur. Diğer taraftan PVC kaplama hortumu kirden korur ve ev temizliği kimyasallarının neden olduğu korozyonu önler. Temizlenmesi son derece kolaydır. Gas Hoses according to EN14800 (Braided - PVC Covered Gas Hose): Gas hoses produced in accordance with European Norm EN 14800, ensure safe gas supply due to their highly flexible and pressure tight constructions.They are suitable for the safe connection of domestic appliances, using gas at a pressure lower than 0,5 bars. Braiding covering the flexible corrugated metal hose made of stainless steel, protects the hose from outside influences while absorbing the mechanical loads. On the other hand, the outermost PVC cover protects the hose from dirt and corrosion caused by household cleaners. It is easy to clean and fully moisture tight. Malzeme Özellikleri: Material Properties: Hortum: AISI 316L Paslanmaz Çelik Hose: AISI 316L Stainless Steel Örgü Teli: AISI 304 Braid: AISI 304 Soket: AISI 304 Sleeve: AISI 304 Kaplama: Şeffaf PVC Covering: Transparent PVC Bağlantı Parçaları: Somun,İç Parça, Nipel : AISI 303 / 304 End Fittings: Nude, Adapter, Nipel: AISI 303 / 304 Üretim Standardı: TSE-EN 14800 Production Standard: TSE-EN 14800 Örgülü – PVC Korumalı Gaz Hortumu Braided - PVC Covered Gas Hose DN (mm) Product Code Length (mm) E06 165 512 105 500 E06 169 706 508 800 E06 169 706 510 E06 169 706 512 28 Fitting M/F T1 – T2 12 1/2" - 1/2" 1000 1200 E06 169 706 515 1500 E06 169 708 520 2000 www.eminteknik.com ıı- Mix Batarya Hortumu / Mix Water Hose Mix Batarya Hortumu / Mixer Hose Product Code DN (mm) Fitting M/F T1 – T2 Length (mm) E06 169 706 503 300 E06 169 706 504 400 E06 169 706 505 500 1/4" - 3/8" E06 169 706 506 600 E06 169 706 507 700 E06 169 706 508 800 E06 169 706 510 E06 169 706 503 1000 6 300 E06 169 706 504 400 E06 169 706 505 500 1/4" - 1/2" E06 169 706 506 E06 169 706 507 600 700 E06 169 706 508 800 E06 169 706 510 1000 E06 169 708 503 300 E06 169 708 504 400 E06 169 708 505 500 1/4" – 3/8" E06 169 708 506 600 E06 169 708 507 700 E06 169 708 508 800 E06 169 708 510 E06 169 708 503 1000 8 300 E06 169 708 504 400 E06 169 708 505 500 E06 169 708 506 Hose Type 1/4" - 1/2" 600 E06 169 708 507 700 E06 169 708 508 800 E06 169 708 510 1000 www.eminteknik.com www.eminteknik.com 29 ııı- Su Hortumu / Water Hose Su Hortumu / Water Hose Product Code DN (mm) Fitting F/F T1 – T2 Length (mm) E06 169 610 503 300 E06 169 610 504 400 E06 169 610 505 E06 169 610 506 500 10 3/8" - 3/8" 600 E06 169 610 507 700 E06 169 606 508 800 E06 169 606 510 1000 E02 169 612 503 300 E02 169 612 504 400 E02 169 612 505 E02 169 612 506 500 12 1/2" – 1/2" 600 E02 169 612 507 700 E02 169 612 508 800 E02 169 612 510 1000 E02 169 616 503 300 E02 169 616 504 400 E02 169 616 505 E02 169 616 506 30 500 16 3/4" – 3/4" 600 E02 169 616 507 700 E02 169 616 508 800 E02 169 616 510 1000 www.eminteknik.com Hose Type ıv- Fan-Coil Bağlantı Flex Hortumları / Fan Coil Connection Hoses Fan-Coil Hortumu (S/E) / Fan-Coil Hose (F/M) Product Code DN (mm) Fitting M/F T1 - T2 Length (mm) E02 169 112 203 300 E02 169 112 204 400 E02 169 112 205 E02 169 112 206 12 1/2" - 1/2" 500 600 E02 169 112 208 800 E02 169 112 210 1000 E02 169 312 203 300 E02 169 312 204 400 E02 169 312 205 E02 169 312 206 12 1/2" - 3/4" 500 600 E02 169 312 208 800 E02 169 312 210 1000 E02 169 116 203 300 E02 169 116 204 400 E02 169 116 205 E02 169 116 206 16 3/4" - 3/4" 500 600 E02 169 116 208 800 E02 169 116 210 1000 E02 169 416 203 300 E02 169 416 204 400 E02 169 416 205 E02 169 416 206 16 3/4" - 1" 500 600 E02 169 416 208 800 E02 169 416 210 1000 E02 169 120 203 300 E02 169 120 204 400 E02 169 120 205 E02 169 120 206 20 1" - 1" Hose Type 500 600 E02 169 120 208 800 E02 169 120 210 1000 www.eminteknik.com 31 ıv- Fan-Coil Bağlantı Flex Hortumları / Fan Coil Connection Hoses Fan-Coil Hortumu (S/S) / Fan-Coil Hose (F/F) Product Code Fitting F/F T1 - T2 Length (mm) E02 169 212 203 300 E02 169 212 204 400 E02 169 212 205 E02 169 212 206 12 500 1/2" - 1/2" 600 E02 169 212 208 800 E02 169 212 210 1000 E02 169 216 203 300 E02 169 216 204 400 E02 169 216 205 E02 169 216 206 16 500 3/4" - 3/4" 600 E02 169 216 208 800 E02 169 216 210 1000 E02 169 220 203 300 E02 169 220 204 400 E02 169 220 205 E02 169 220 206 32 DN (mm) 20 500 1" - 1" 600 E02 169 220 208 800 E02 169 220 210 1000 www.eminteknik.com Hose Type v- Boiler Hortumu / Boiler Hose Boiler Hortumu Uygulama: Boiler içinde ısı değiştirgeci olarak kullanılır. Malzeme Özellikleri: Hortum: AISI 316 Paslanmaz Çelik Başlıklar: AISI 316 - 304 Paslanmaz Çelik Başlık Tipi: 316 Diş tipi içi dişli yada erkek dişli olmak üzere iki tipli üretilir. Uzunluklar: Müşteri talebine ögre üretilmektedir. Boiler Hose Application: Heat exchanger in boilers. Material Properties: Hose: AISI 316L Stainles Steel Hose: AISI 316L - 304 Stainles Steel Fitting: AISI 316 - 304 Stainles Steel with internal or external thread. Length: Acc. to customer requirements www.eminteknik.com 33 v- Yangın Sprinkler Hortumu / Fire Sprinkler Hoses Sprinkler Hortum ve Bağlantı Seti DN20 AISI 316L Esnek Hortum AISI 304 Tel Örgü DN20 AISI 3016L Flexible Hose Braided with AISI 304 wire Sprinkler Hose and Connection Set 1” Hat bağ lantı Karbon Çelik (Paslanmaz Op.) Line Connection C.Steel (S.Steel Op.) Yüksük Paslanmaz Çelik Ring S.Steel Hortum montaj seti Bracket 1/2” Sprink bağlantı Karbon Çelik (Paslanmaz Op.) Sprink Connection C.Steel (S.Steel Op.) 34 www.eminteknik.com v- Yangın Sprinkler Hortumu / Fire Sprinkler Hoses Genel General Sprinkler hortumu, yaygın hattıyla sprinkler arasındaki bağlantıyı sağlayan, sismik hareketlerden etkilenmeyen flexible örgülü hortumlardır. Özel dizayn bağlantı aparatı; yüsek basınçlarda tavan yük gelmeden güvenilir montaj imkanı sağlarken işçilik sürelerini azaltan sistem, zamana bağlı giderleri minimize eder. Kamuya açık alanlarda (hastane, otel, alışverişmerkezileri vb.) tercih edilen sprinkler bağlantı hortumları doğru montaj ile yangın tesisatlarında ömür boyu güvenle kullanılabilir. Sprinkler hoses; metal, flexible woven hoses that provide the connection between the fire line and the sprinkler which are not effected by seismic movements. Specially designed connection apparatus; minimizing work periods and costs associated with time while enabling safe assembly without putting loads on ceilings at high pressures. The sprinkler connection hoses which are preferred to be used in public areas, high buildings where fire fighting is difficult and where fire load is high (e.g. hospital, hotels, shopping malls, etc.) can provide lifelong use in fire installations when installed properly. Malzeme Özellikleri / Metarial Features Hortum / Hose Örgü Teli / Braiding wire Bağlantılar / Connections Bağlantı Seti / Connection Adapter AISI 316 Paslanmaz Çelik / AISI 316 Stainless Steel AISI 304 Paslanmaz Çelik / AISI 304 Stainless Steel St37 Karbon Çelik / St37 Carbon Steel St37 Karbon Çelik / St37 Carbon Steel Ölçüler / Dimensions Nominal Çap / Nominal Diameter Bağlantı Çapı / Conn. Diameter Standart Boylar / Standarc Length DN 20 (3/4’’) Nipel tarafı-1’’ / Sprink tarafı-1/2’’ - Nipple side-1’’/Sp. Side-1/2’’ 500mm - 700mm - 1000mm - 1500mm - 2000mm Sürtünme Kayıpları ve Özellikleri / Friction Losses and Specifications Hortum Boyu Hose Length Giriş Ölçüsü Input End Çıkış Ölçüsü Output End Maks. 90˚ Bükme Sayısı Max. No of 90˚ Bends E06 161 620 205 0,5 m 1 inch 1/2 inch 3 20 bar E06 161 620 207 0,7 m 1 inch 1/2 inch 4 20 bar E06 161 620 210 1,0 m 1 inch 1/2 inch 4 20 bar E06 161 620 215 1,5 m 1 inch 1/2 inch 4 20 bar E06 161 620 220 2,0 m 1 inch 1/2 inch 4 20 bar Model No Max. Basınç Max. Pressure Teknik Detaylar Technical Details Ölçüler Dimentions DN 20 3/4’’ Ölçüler Dimentions Büküm Yarıçapı Bend Radius D (mm) D1 / D2 (mm) Tolerans (mm) Tolerance 20,6 26,0 / 27,0 ± 0,3 Statik Static 70 Dinamik Dynamic Basınç Pressure (20 ˚C - bar) Ağırlık Weight (kg/m) 170 55 0,420 www.eminteknik.com 35 v- Yangın Sprinkler Hortumu / Fire Sprinkler Hoses Teknik Özellikler Technical Properties Parça No Part Number Özellikler Properties Parça Adı Part Name Malzeme Material 1 Sprinkler Ucu (1/2’’) Sprinkler Connection (1/2’’) St 37.2 AISI 304 - AISI 316 (Op.) 2 Ara Boru Extension Pipe St 37.2 AISI 304 - AISI 316 (Op.) 3 Yüksük Metal Ring of Braid AISI 304 4 Örgü Braid AISI 304 5 Hortum Hose AISI 316L 6 Yangın Hat Bağlantısı (1’’) Fire Line Connection (1’’) St 37.2 AISI 304 - AISI 316 (Op.) (Op.) = Opsiyonel Optional Bağlantı Seti Özellikleri Properties of Connection Set Malzeme / Material : Galveniz Kaplı DKP Sac Galvanized DKP Metal Sheet, Set İçeriği / Set Content : 2 Adet Yan Destek Kelepçesi 2 Pieces Side Support Clamp, : 1 Adet Hortum Sabitleme Kelepçesi 1 Piece Ceiling Suspension Rod, : 1 Takım Bağlantısı Civata ve Somunları 1 Set of Connection Bolts and Nuts. Tavan Askı Profili standart 70 cm’dir. Farklı tavan uygulamaları için Satış Servisimize danışınız. Ceiling Suspension Rod is standart 70 cm. You may contact our sales service for different ceiling applications. 36 www.eminteknik.com v- Yangın Sprinkler Hortumu / Fire Sprinkler Hoses Montaj Detayları Mounting Details Sprink hortumunun 1’’ nipel kısmı yangın hattındaki mekanik T veya manşona anahtarı yardımıyla sıkılır. The 1’’ nipple of the sprinkler hose is secured to the mechanical T or clamping sleeve using a wrench. Şekil 2-A Diagram 2-A Şekil 2-B Diagram 2-B Kutu profil, sağ-sol yan destekler ve orta kelepçe Şekil 2-A’da görüldüğü gibi birleştirilir Bu işlem esnasında yan destek üzerindeki tırnakların içeriye doğru olduğuna dikkat edilmelidir. Kutu profili; yan destekler üzerinde kenarlarda eşit miktarda çıkıntı kalacak şekilde durmalıdır. Daha sonra Şekil 2-B’ deki gibi bağlantı seti; tavanın ‘T’ profiline irtibatlandırılır. The box profile is assembled by connecting the left and right supports and middle clamp as shown in Diagram 2-A. During this process, attention must be paid so that the connecting tabs on the side of the side supports are facing inward. Box profile; must be positioned on the side supports with equal protrusion from both sides. Next, the connection kit is connected to the ‘T’ profile on the ceiling as shown in Diagram 2-B. Sprinkler hortumunun boşta kalan 1/2’’ kısmı orta kelepçeye şekildeki gibi geçirilir. The 1/2’’ part of the sprinkler hose that left outside is placed on the clamp as shown in the diagram. www.eminteknik.com 37 v- Yangın Sprinkler Hortumu / Fire Sprinkler Hoses Sağ ve sol yan desteklerdeki civatalar ile orta kelepçe üzerindeki civata boşluğu alınacak şekilde sıkılır. The nuts on right and left supports are tightened in a way which will eliminate any slack between the nuts and the space between the middle clamp. Son olarak sprinkler hortumu asma tavan orta noktasındaki deliğe merkezlenir. Yan destekler üstten ve yandan tamamen sıkılır, hortumun uç kısmı tavan döşemesinin üst hizasında kalacak şekilde orta noktadaki kelepçeyle sabitlenir. Sprinkler nozulu takıldıktan sonra eksenel kaçıklık varsa tekrar ayar yapılabilir. Finally, the sprinkler hose is centered on the hole in the middle of the suspended ceiling. The side supports are tightened from top and sides completely; the end part of the hose is fixed with the central clamps as to remain above the headlining. After the sprinkler nozzle has been attached, a re-adjustment can be made in case of eccentricity. Montaj Talimatları İçin Uyarılar / Coution For Installation Instructions Aşağıdaki montaj talimatları, sadece Yangın Güvenliği alanında yetkili ve lisanslı teknisyenler içindir.EMINFLEX Sprinkler Hortumun bakımı ve incelenmesi sırasında, yangın koruma sistemi durdurulmuş olmalıdır. Sistem çalışırken herhangi bir işlem yapılmamalıdır. Sistemdeki tüm M6 civatalar ( Şekil-4A ve Şekil-4B ) pound-foot (2.7 N.m) ve M12 civata (Şekil-4C) 5 pound-foot (6.8 N.m) lik trok ile sıkılmalıdır. Installation instructions below are only for qualified and/or licensed tecnicians in the Fire Protection field. During maintenance or inspection of EMINFLEX sprinkler product, facility fire protection system sohuld be deactivated. Do not attempt any process when the system is active. All M6 bolts ( fig-4A ve fig.-4B) within the set should be tightened with a 2 pound-foot (2.7 N.m) torque and M12 bolt ( fig-4C ) with a 5 pound-foot (6-8 N.m ) torque. 38 www.eminteknik.com c- Diğer Özel Başlıklı Hortumlar ve Armatürler / Other Flexible Hose Assemblies and Fittings Özel Başlikli Hortum Other Hose Assemblies Gereksinime göre belirli uzunluktaki örgülü veya örgüsüz metalik hortumlara DIN/ISO/SAE/BS/ANS uyarınca, argon kaynakla veya gümüş alaşımlı sert lehimleme yöntemli ile, karbon çeliğinden, paslanmaz çelikten, bakırdan ve pirinçten imal edilen rakorlar kaynatılır. According to the requirements, fittings made of carbon steel, stainless steel, copper or brass welded to the braided or unbraided metal flexible hoses by using TIG welding or silver alloyed brazing methods in accordance with the DIN / ISO / SAE / BS / ANS Quality standarts. www.eminteknik.com 39 c- Diğer Özel Başlıklı Hortumlar ve Armatürler / Other Flexible Hose Assemblies and Fittings Klima Armatürleri Fittings For Air-Conditioning Systems used in Automotive Industry 40 www.eminteknik.com 3- Kompansatör / Expansion Joints a- Kaynak Boyunlu Kompansatörler / Expansion Joints with welded neck b- Döner Flanşlı Kompansatörler / Expansion Joints with Swivel flanges c- Sabit Flanşlı Kompansatörler / Expansion Joints with fixed flanges d- Dıştan Basınçlı Kompansatörler / External Pressurized Expansion Joints e- Dekoratif Kompansatörler / Decorative Expansion Joints f- Dilatasyon Kompansatörleri / Dilatation Expansion Joints g- Limit Rotlu Kompansatörler / Dilitation Expansion Joints h- Limit Rotlu Kompansatörler / Dilitation Expansion Joints i- Kardan Mafsallı Kompansatörler / Angular Expansion Joints (Earthquake Expansion Joints) j- Omega Flexler / Omega Flex k- Kauçuk Kompansatörler / Rubber (Elastic) Expansion Joints l- Genleşme Hesabı / Expansion Calculation m- Montaj Direktifleri / Mounting Instructions www.eminteknik.com Kompansatörler Hakkında Genel Bilgiler Kompansatörler boru hatlarında dört amaca yönelik olarak kullanılmaktadırlar. • Genleşme alıcı olarak • Dilatasyon geçişleri (X;Y) hareketleri • Deprem (X;Y;Z) düzlemindeki hareketler • Titreşim alıcı olarak Genleşme Parçaları (Metal Kompansatörler) Kompansatörlerin genleşme parçası olarak işlevi, boru hatlarının ısıl genleşme sorunlarını çözmektir. Kompansatörlerin yapısını oluşturan ana eleman Paslanmaz Cr-Ni Çelik olan ondülasyon kısmıdır. Boru hattının ısıl genleşmesinden doğacak gerilimler ondülasyon tarafından yutularak kompanze edilir. Kompansatörlerin ondülasyon kısmı hem ısıl genleşmeleri kompanze edebilecek esneklikte hem de basınç – sıcaklık ve akışkan şartlarına karşı yeterli mukavemette dizayn edilmesi gerekmektedir. Ondülasyon malzemesinin et kalınlığı, hatve, yükseklik ve diğer yapısal özellikleri; boru hattının işletme şartlarındaki basınç, sıcaklık, genleşme ve akışkanın özelliklerinin bir bütünü halinde dizayn edilir. Kompansatör uygulamalarında ondülasyon malzemesi olarak diğerlerine göre üstün vasıflara sahip Ostenitik paslanmaz çelikler kullanılmaktadır. Bu çeliklerin en büyük özellikleri çalıştıkca akma noktasının yükselmesine sebep olan “Cold Working” özelliğidir. Ostenitik paslanmaz çelikler yüksek korozyon mukavemetinin yanında soğuk şekil verme ile kazanılmış yüksek mekanik mukavemet, yüksek elastik limit ve kaynak işlemine uygunluk gibi üstün özelliklere sahiptirler. Ostenitik paslanmaz çelikler AISI 304, 316, 316L, 321, 310 grubunda yer almaktadır. Kompansatör ondülasyonlarının imalatında tüm genel uygulamalar için AISI 304 kalite malzeme kullanılmaktadır. Deniz suyu hatları, baca gazı boruları gibi korozyon olasılığı yüksek olduğu ortamlarda AISI 316 kalite. Sıcaklığın 450 C üzerinde olduğu boru devrelerinde ise AISI 321 kalite paslanmaz çelik kullanılır. Kompansatör hesaplarında genel olarak Amerikan EJMA ( Expansion Joints Manufacturers Assoeialion) Standartları esas alınmaktadır. Kompansatörün yapısını oluşturan diğer elemanlar ise tesisata irtibatını sağlayan bölümlerdir. Flanş veya boğaz kısmı kovan borusu (lineer) koruma borusu gibi parçalar oluşturur. Boru Hattındakı Harekete Göre Kompansatör Tipleri • Eksenel • Yanal • Açısal Kompansatör Uygulamaları • Buhar hatları • Sıcak su hatları • Kızgın yağ hatları • Kızgın gaz hatları • Gemi egzosları • Pompa – Fan titreşimleri • Demontaj uygulamaları Eksenel Kompansatörler Genleşmenin emilmesi için ilk seçenek olan eksenel kompansatörler ek bir tesis alanı gerektirmeksizin sözü edilen sorunu çözerler. Akışkanın akış yönünü değiştirmez. Önemli özellik eksenel kompansatörün boru sisteminin genleşmesini en az yer kaplayarak karşılayan eleman olmasıdır. Kompansatörlerin yerleştirilmesi sırasında boru güzergahının değiştirilmesi gerekmediğinden basınç kaybı asgariye indirilir. Ayrıca eksenel kompansatörlerin içine yerleştirilebilecek laynerler bu kaybı daha da alt düzeye indirir. (türbülansı önler) • Dekoratif tip tesisat kompansatörü ( İç dişli veya Kaynak boyunlu St 37 karbon çeliği) EMINFLEX U & V Flex Hortum Bağlantıları, yangın hatları için bina dilatasyon geçiş noktalarında çökme ve yer değiştirmeleri karşılamak için kullanılan; eğilebilir ve bükülebilir yapıya sahip, dayanıklı hortumlardır. U & V flex hortumlar, rijit bağlantılarda görülebilecek kırılma ve çatlama gibi sorunları ortadan kaldırır; pratik, emniyetli ve kolay montaj imkanı sunar. Bağlantı : Flanşlı, Kaynak boyunlu, Yivli bağlantı veya dişi bağlantı -Yangın hatlarındaki dilatasyon geçiş noktaları Eksenel Kompansatörlerin Tipleri • Kaynak boyunlu metal kompansatör (boyunlar St 37 veya Cr-Ni ) • Sabit flanşlı metal kompansatörler (TSE ;DIN ; ASME standartlarına göre Karbon çeliği veya Cr-Ni ) • Döner flanşlı metal kompansatörler (TSE;DIN ; ASME standartlarına göre Karbon çeliği veya Cr-Ni ) • Dıştan basınçlı metal kompansatör ( Kaynak boyunlu St 37 veya Cr-Ni . Flanşlı TSE DIN;ASME standartlarında karbon çeliği veya Cr-Ni ) • Dekoratif tip tesisat kompansatörü ( İç dişli veya Kaynak boyunlu St 37 karbon çeliği) 42 www.eminteknik.com General Information About The Expansion Joints Expansion Joints are used in pipelines for four purposes. • Expansion • Movements of dilatation transitions (X; Y) • Movements on earthquake plane (X; Y; Z) • Vibration absorber Expansion Parts (Metal Expansion Joints) The function of the expansion joints , also known as compensators is to compensate the relative movement caused by thermal expansion in the pipe lines. The main flexible element of the expansion joints is the metal bellow, made up of a series of one or more convolutions designed to withstand the internal pressures of the pipe, but flexible enough to compensate axial, lateral and / or angular movements. Wall thickness, pitch, height and other structural characteristics of the metal bellows designed as a whole of pressure, temperature, expansion and fluid properties of the pipeline at operating conditions. The austenitic stainless steels used for the production of metal bellows, because of their high chromium and nickel content, are the most corrosion resistant of the stainless group providing unusually fine mechanical properties.They can be hardened significantly by cold working which is may be the most important feature of these steels. Besides their high corrosion resistance, austenitic stainless steels commonly used due to their high mechanical strength acquired with cold forming, high elastic limit and weldability. Most common grades of austenitic stainless steels are 304, 316, 316L, 321, 310. When selecting a particular grade of stainless steel used in the manufacturing metal bellows, it is essential to consider primary properties required, such as corrosion and heat resistance. Important consideration must also be given to the secondary properties, like physical and mechanical properties. For example; Metal bellows made of grade 304 used for all general applications whereas for environments having high probability of corrosion such as sea water lines; flue gas pipes, grade 316L should be used, and for the pipe lines where the temperature is above 450 ˚C, metal bellows made of grade 321 are used. Metal expansion joints designed according to the rules laid out by EJMA. Other elements that form the construction of the Expansion Joints are the connections such as weld ends and flanges. Expansion Joints Types According To Pipeline Actions • Axial • Lateral • Angular Expansion Joints Applications • Steam line • Hot water line • Hot oil line • Hot gas line • Vessel exhaust • Pump – Fan vibrations • Dismantling applications AXIAL Expansion Joints Axial Expansion Joints which is the first option to absorb the expansion, solve the problem mentioned without an additional facility area. It does not change the flow direction of the fluid. The important feature is, the axial Expansion Joints is the element that meets the expansion of pipeline by occupying less space. As no change in pipe route is required during placement of the Expansion Joints, pressure loss is minimized. Further, liners to be placed into the axial Expansion Joints also minimizes this loss (prevents turbulence). • Decorative type instalment Expansion Joints (with internal threat or welding neck, St 37 carbon steel) EMINFLEX U & V Flex Hose Connections are durable hoses with bendable and flexible structure, used for meeting the subsidence and displacements of building dilatation transition points for fire lines. U & V flex hoses eliminates the problems such as cracking and breakage that can be seen on rigid connections, and they offer practical, safe and easy installation. Connection: With flange, welding neck, threaded connection or a female connection - Dilatation crossing points of fire lines Types of Axial Expansion Joints • Welded Duct Metal Expansion Joints (ducts steel St-37 or Cr-Ni) • Fixed flanged metal Expansion Joints (according to TSE; DIN; ASME they will be made of carbon steel or Cr-Ni) • Swivel flanged metal Expansion Joints (according to TSE; DIN; ASME they will be made of carbon steel or Cr-Ni) • External Pressurized metal Expansion Joints (Welded duct of St 37 or Cr-Ni. The flanged ones will be made of carbon steel or Cr-Ni according to TSE, DIN, ASME) • Installation Expansion Joints for decorative purposes (internal geared or welded duct will be made of St 37 carbon steel) www.eminteknik.com 43 a- Kaynak Boyunlu Kompansatörler / Expansion Joints with welded neck Kaynak Boyunlu Metal Kompansatörler Welded Duct Metal Expansion Joints En basit kompansatör tipidir. Kaynak boyunlu olarak tek körükten oluşur. Genel olarak eksenel hareketleri absorbe etmek için dizayn edilir. They are the simplest type of Expansion Joints. They are composed of a single corrugation. In general, they are designed to absorb the axial movements. L Nominal Diameter d s h ΔL Eff. Area NB mm inç 30 45 60 25 1" 180 - - 33,7 2,6 50 18 32 1 180 - - 42,4 3,2 50 18 40 1 190 220 - 48,3 3,2 50 22 50 2" 185 215 - 60,3 3,6 50 36 65 2 185 215 240 76,1 3,6 50 58 4 50 78 1/4" 1/2" 1/2" 80 3" 185 215 245 88,9 100 4" 200 230 265 114,3 4,5 60 124 60 180 80 252 125 5" 200 230 265 139,7 5 150 6" 245 270 315 165 5 200 8" 265 305 340 219,1 4,5 80 430 250 10" 310 360 395 273 5,6 100 660 Working Pressure 16 bar SPECIFICATIONS POZ NO 44 ITEMS 1 Bellow (Ondüle) 2 Flange 3 Lainer (İç Kovan) www.eminteknik.com MATERIAL AISI 304, AISI 316, AISI 321 St37-2 Welded Neck (AISI 304, 316, 321) AISI 304, AISI 316, AISI 321 b- Döner Flanşlı Kompansatörler / Expansion Joints with Swivel flanges Döner Flanşlı Metal Kompansatörler Swivel Flanged Metal Expansion Joints Genel olarak eksenel hareketleri alabilmek için dizayn edilmiştir. Ancak küçük miktarlarda yanal ve açısal hareketleri de rahatlıkla alabilirler. In general, the are designed so as to absorb axial movements. However they will be also able to absorb easily the lateral and angular movements. Nominal Diameter L D d k b n Ф Eff. Area NB ΔL mm 25 inç 1" 30 110 45 - 60 - 115 43 85 18 4 14 18 32 11/4" 110 - - 140 43 100 18 4 18 18 40 1 120 150 - 150 49 110 18 4 18 22 50 2" 120 150 - 165 61 125 18 4 18 36 65 21/2" 120 150 180 185 77 145 18 4 18 58 80 3" 120 150 180 200 89 160 20 8 18 78 100 4" 120 150 185 220 115 180 20 8 18 124 125 5" 125 155 190 250 140 210 22 8 18 180 150 6" 130 155 200 285 169 240 22 8 22 252 200 8" 150 190 230 340 220 295 24 12 22 430 250 10" 165 205 245 405 274 355 26 12 26 660 1/2" Working Pressure 16 bar SPECIFICATIONS POZ NO ITEMS 1 Bellow (Ondüle) 2 Flange 3 Lainer (İç Kovan) MATERIAL AISI 304, AISI 316, AISI 321 St37-2 Welded Neck (AISI 304; 316) AISI 304, AISI 316, AISI 321 www.eminteknik.com 45 c- Sabit Flanşlı Kompansatörler / Expansion Joints with fixed flanges Fixed Flanged Metal Expansion Joints Sabit Flanşlı Metal Kompansatörler L Nominal Diameter D d k b n Ф ΔL Eff. Area NB mm inç 30 45 60 25 1" 110 - - 115 43 85 18 4 14 18 32 1 1/4" 110 - - 140 43 100 18 4 18 18 40 1 120 150 - 150 49 110 18 4 18 22 50 2" 120 150 - 165 61 125 18 4 18 36 65 2 120 150 180 185 77 145 18 4 18 58 80 3" 120 150 180 200 89 160 20 8 18 78 100 4" 120 150 185 220 115 180 20 8 18 124 125 5" 125 155 190 250 140 210 22 8 18 180 150 6" 130 155 200 285 169 240 22 8 22 252 200 8" 150 190 230 340 220 295 24 12 22 430 250 10" 165 205 245 405 274 355 26 12 26 660 1/2" 1/2" Working Pressure 16 bar SPECIFICATIONS POZ NO 46 ITEMS 1 Bellow (Ondüle) 2 Flange 3 Lainer (İç Kovan) www.eminteknik.com MATERIAL AISI 304, AISI 316, AISI 321 St37-2 Welded Neck (AISI 304 ;316) AISI 304, AISI 316, AISI 321 d- Dıştan Basınçlı Kompansatörler / External Pressurized Expansion Joints Dıştan Basınçlı Kompansatörler External Pressurized Expansion Joints Yüksek basınç ve yüksek genleşme uygulamalarında kullanılır. Bu şartlar altındaki normal kompansatörler deformasyona maruz kalır. Dıştan basınç tatbikatı ile ondülasyon kararsız durumdan kurtarılır. Yani flambaja uğrayan basılan bir çubuk durumundan, çekmeye çalışan bir çubuk durumuna dönüşür. They are used in high pressure and high expansion applications. Under these conditions, normal Expansion Joints would be subjected to deformation. Via the external pressure application the corrugation is protected against its unstable situation. In other words, it is transformed from a rod subjected to buckling to a rod trying to absorb. Nominal Diameter L d s D ΔL Expansion Eff. Area cm² mm inç 30 60 90 25 1" 295 395 520 33,7 2,6 88,9 54 32 1/4" 1 305 405 530 42,4 3,2 88,9 54 40 1 1/2" 315 415 535 48,3 3,2 88,9 54 50 2" 320 420 555 60,3 3,6 114,3 89 65 2 335 430 560 76,1 3,6 114,3 91 80 3" 335 435 585 88,9 4 139,7 141 4,5 165 196 5 193,7 272 1/2" 100 4" 340 450 585 114,3 125 5" 355 485 595 139,7 150 6" 365 495 615 165 5 219,1 346 200 8" 415 540 685 219,1 4,5 323,9 572 250 10" 440 605 760 273 5,6 355,6 829 Working Pressure 40 bar 40 bar 40 bar 40 bar 40 bar 40 bar 25 bar 25 bar 25 bar 25 bar 25 bar SPECIFICATIONS POZ NO ITEMS MATERIAL 1 Inside Pipe 2 Bellow (Ondülasyon) 3 Outside Pipe St37 Welded Neck 4 Welded Neck St37 Welded Neck St37 Welded Neck AISI 304, AISI 321, AISI 316 www.eminteknik.com 47 e- Dekoratif Kompansatörler / Decorative Expansion Joints Dekoratif Tıp Tesisat Kompansatörleri Installation Expansion Joints For Decorative Purposes Yüksek katlı binaların tesisat kolonlarında sıcaklık farklılıklarından dolayı genleşme meydana gelir. Bu da boru hattında zorlanmaya, eğilmelere ve gürültüye neden olur. It is certain that expansion is occurred in riser pipes of highrise buildings due to the temperature differences. And this will cause the stress, bending of the pipe lines and will also create noise. Dekoratif tip tesisat kompansatörleri; The installation Expansion Joints for decorative purposes; • Kolon borularındaki ısıl genleşme, gürültü ve esneklik sorunlarını giderir. • Dekoratif görüntüsü ile konutlar, oteller ve görünür mekanlarda rahatlıkla kullanılır. • İç kovanı basınç kaybı ve eksen kaçıklıklarını önler, Dış kovanı ondülasyonları dış etkenlerden korur ve dekoratif görüntü verir. • Pimi ve kanalı sayesinde genleşme miktarı rahatlıkla gözlenebilir. • 90-70 °C Kolon hatlarında (yaklaşık 10 kat) bir adet kullanılması tavsiye edilir. • Will solve the problem of thermal expansion, noise and flexibility in the riser pipes. • Will be used comveniently in residences, hotels as well as visible facilities thanks to their decorative appearance. • The internal sleeve will prevent the pressure loss and axil run-outs, the external sleeve will protect the corrugation against the external factors and provide a decorative appearance. • The expansion quantity will be easily monitored thanks to its pin and channel. • It is recommended to use one Expansion Joints (for a building of nearly 10 stages) in 90-70 C lines. Nominal Diameter Outside Diameter Size d ½” ¾” 1” 1 ½” 2” 2 ½” 3” 4” D 35 42 51 60 63 70 99 114 139 L 260 260 260 260 260 260 260 260 260 Not: 2” ve Üstü Çaplar Dişsiz, Kaynak Boyunlu İmal Edilir. 48 1 ¼” www.eminteknik.com Note: the diameters equal to 2” and upper will be manufactured without thread; they will be as welded duct Expansion Joints. f- Dilatasyon Kompansatörleri / Dilatation Expansion Joints Dilatation Expansion Joints Dilatasyon Kompansatörleri TYPE I DN N Lo Lt Lr Dr L 25 18 72,5 150 470 12 330 2 32 18 72,5 150 470 12 330 2 40 17 85 150 500 12 355 2 50 11 65 150 460 16 315 2 65 10 75 170 500 16 355 2 80 10 80 200 550 16 400 2 100 9 80 250 610 20 450 2 125 8 87,5 250 630 20 470 2 150 8 95 250 650 24 485 2 200 9 117,5 250 700 24 535 2 250 8 112,5 250 700 30 530 2 PART NO ITEMS ROT MATERIAL PRESSURE & TEMPERATURE AISI 304; AISI 321; AISI 316 PN:16 (-80 ˚C....+420 ˚C) 1 Bellow (Ondüle) 2 3 Intermediate Pipe (Tandem) St 37 Welded Neck St 37 Welded Neck Lama 4 Limited Rot St 37 Welded Neck 5 Connection Typ St 37 Welded Neck PN:6; PN:10; PN:16; PN:25 www.eminteknik.com 49 g- Limit Rotlu Kompansatörler / Dilitation Expansion Joints Limit Rotlu Dilatasyon Kompansatörleri Limit Roded Dilatation Expansion Joints Tek bir yanal kompansatör tek düzlemde iki boyutlu hareketi emebilir. Bu tip birbirine bağlı iki kompansatör ile üç boyutlu hareketlerin emilmesi mümkündür. A single leteral Expansion Joints is capable to absorb a movement of two dimensions in one plane. Thus, it will be possible to absorb movements of three dimensions with two connected Expansion Joints of this type. Yanal kompansatörün ana görevi bükülme streslerini engellemektir. Bu stresler basınç zorlamalarından ötürü oluşur. 50 www.eminteknik.com The main punction of the lateral Expansion Joints is to prevent the stress. These stresses may arise from pressure forcing. h- Limit Rotlu Kompansatörler / Dilitation Expansion Joints Data Table Of Limit Roded Dilatation Expansion Joints Limit Rotlu Dilatasyon Kompansatörü Ölçü Tablosu TYPE1 DN Nominal Diameter TYPE2 EXPENSIONS AXIAL TOTAL LATERAL EXPENSIONS SIZE ± TOTAL ± TYPE3 (L-MM) AXIAL TOTAL LATERAL ± TOTAL ± EXPENSIONS SIZE (L-MM) AXIAL TOTAL LATERAL ± SIZE TOTAL ± (L-MM) 32 1 1/4" 30 15 25 25 595 30 15 50 50 620 30 15 75 75 690 40 1 30 15 25 25 620 30 15 50 50 650 30 15 75 75 720 50 2" 30 15 25 25 580 30 15 50 50 615 30 15 75 75 690 65 2 30 15 25 25 620 30 15 50 50 660 30 15 75 75 735 45 23 25 25 665 45 23 50 50 705 45 23 75 75 780 60 30 25 25 710 60 30 50 50 750 60 30 75 75 825 15 75 75 790 80 100 125 150 200 250 1/2" 1/2" 3" 4" 5" 6" 8" 10" 30 15 25 25 700 30 15 50 50 730 30 45 23 25 25 750 45 23 50 50 780 45 23 75 75 835 60 30 25 25 795 60 30 50 50 830 60 30 75 75 885 30 15 25 25 750 30 15 50 50 790 30 15 75 75 825 45 23 25 25 805 45 23 50 50 840 45 23 75 75 860 60 30 25 25 860 60 30 50 50 895 60 30 75 75 915 30 15 25 25 765 30 15 50 50 810 30 15 75 75 865 23 75 75 910 45 23 25 25 810 45 23 50 50 875 45 60 30 25 25 875 60 30 50 50 920 60 30 75 75 950 30 15 25 25 840 30 15 50 50 890 30 15 75 75 945 45 23 25 25 890 45 23 50 50 940 45 23 75 75 995 60 30 25 25 940 60 30 50 50 985 60 30 75 30 15 25 25 885 30 15 50 50 960 30 15 75 75 1040 75 1050 45 23 25 25 935 45 23 50 50 1015 45 23 75 75 75 1100 75 1150 60 30 25 25 990 60 30 50 50 1065 60 30 30 15 25 25 875 30 15 50 50 930 30 15 75 45 23 25 25 830 45 23 50 50 985 45 23 75 75 1040 75 1095 60 30 25 25 985 60 30 50 50 1040 60 30 75 75 1150 www.eminteknik.com 51 i- Kardan Mafsallı Kompansatörler / Angular Expansion Joints (Earthquake Expansion Joints) Açısal Kompansatörler (Deprem Veya Kardan Mafsallı) Angular Expansion Joints (Earthquake Or Universal Joint) Açısal kompansatörler genleşmenin emilmesi için kullanılan üçüncü grup genleşme elemanlarıdır. Bu tip kompansatörlerin en büyük avantajları iki veya üç boyutlu, aynı zamanda yön değişimini gerektiren hareketlerin emilmesi için uygun seçenek olmalarıdır. Özellikle yanal hareketlerin çok büyük olduğu durumlarda açısal kompansatörler kesin çözüm sağlar. The angular Expansion Joints are third group of expansion elements for the absorption of expansion. The most important advantages of this type of Expansion Joints are that they are the best choice fort he absorption of movement of two of three dimensions and that require at the same time the direction change. The angular Expansion Joints are the exact solution in cases where the lateral movements are very important. It is recommended and forced to use angular Expansion Joints under binary or triple groups. Different conceptions may be discussed according to the fact that the expansion occurred is in one or several planes. These conceptions are whether Expansion Joints with one joint or two joints. Bu tip kullanım sırasında açısal kompansatörler ikili yada üçlü gruplar halinde kullanılmalıdır. Oluşan genleşmenin tek ya da çok düzlemde olmasına göre değişik tasarımlar söz konusudur. Bu tasarımlar gerek tek gerekse çift mafsallı kompansatörlerdir. MATERIAL PROPERTIES Part No. 52 Statment Part Quantity Material 1 2 Ondülasyon Çift Kat / Metal Bellows (2 layer) AISI 304 2 1 Orta Boru / Tandem Pipe St 37 (CS) 3 4 Yan Lama / Side Sheet Bars St 37 (CS) 4 2 Orta Lama / Middle Sheet Bars St 37 (CS) 5 2 Mafsal / Joint Arm St 37 (CS) 6 2 Kaynak Borusu / Welded Neck St 37 (CS) 7 4 Birleştirici Lama / Connective Sheet Bars St 37 (CS) 8 8 Rondela ve Pim / Rondel & Pin St 37 (CS) www.eminteknik.com i- Kardan Mafsallı Kompansatörler / Angular Expansion Joints (Earthquake Expansion Joints) Açısal Kompansatörler (Deprem Veya Kardan Mafsallı) Teknik Özellikler • Standart Deprem Kompansatörleri Kaynak boyunlu olarak üretilmektedir. • İşletme Basıncı : PN:6 ; PN:10 ; PN:16 • Dizayn Sıcaklığı : -80......+420 C • Ondülasyon Malz. : AISI 304 , AISI 321, AISI 316 • Flanş,Boru vs : St 37-2 Karbon çeliği • Mafsallar : St 37-2 Karbon çeliği Angular Expansion Joints (Earthquake Or Universal Joint) Technical Specifications • The standard earthquake Expansion Joints are manufactured as flanged Expansion Joints. • Operating pressure : PN:6; PN:10; PN:16 • Conception temperature : -80……+420 C • Corrugation material : AISI 304, AISI 321, AISI 316 • Flange, pipe, etc… : St 37-2 Carbon Steel L d Size Expensions ( L mm) D Pipe (mm) PN X:50 Y,Z:50 X:50 Y,Z:100 X:100 Y,Z:50 X:100 Y,Z:100 Ød t ØD 25 1” 16 680 820 710 860 33,7 2,6 140 32 11/4” 16 680 820 710 860 42,4 3,2 140 40 1 ½” 16 680 820 710 860 48,3 3,6 140 50 2” 16 730 890 770 930 60,3 3,6 170 65 2 ½” 16 730 890 770 930 76,1 3,6 190 80 3” 16 780 950 820 990 88,9 4,0 225 100 4” 16 780 950 820 990 114,3 4,5 250 139,7 5,0 275 125 5” 16 910 1080 950 1140 150 6” 16 910 1080 950 1140 168,3 5.0 305 200 8” 16 1070 1280 1120 1350 219,1 4,5 360 250 10” 16 1070 1280 1120 1350 273 5,6 440 www.eminteknik.com 53 j- Omega Flexler / Omega Flex U & V Flex Hortum Bağlantıları EMINFLEX U & V Flex Hortum Bağlantıları, yangın hatları için bina dilatasyon geçiş noktalarında çökme ve yer değiştirmeleri karşılamak için kullanılan; eğilebilir ve bükülebilir yapıya sahip, dayanıklı hortumlardır. U & V flex hortumlar, rijit bağlantılarda görülebilecek kırılma ve çatlama gibi sorunları ortadan kaldırır; pratik, emniyetli ve kolay montaj imkanı sunar. Bağlantı : Flanşlı, Kaynak boyunlu, Yivli bağlantı veya dişi bağlantı -Yangın hatlarındaki dilatasyon geçiş noktaları U & V Flex Hose Connections EMINFLEX U & V Flex Hose Connections are durable hoses with bendable and flexible structure, used for meeting the subsidence and displacements of building dilatation transition points for fire lines. U & V flex hoses eliminates the problems such as cracking and breakage that can be seen on rigid connections, and they offer practical, safe and easy installation. Connection: With flange, welding neck, threaded connection or a female connection - Dilatation crossing points of fire lines 54 www.eminteknik.com j- Omega Flexler / Omega Flex U Flex Ondülasyon mal Örgü malzemesi Bağlantı şekli : AISI 316 Cr-Ni : AISI 304 Cr-Ni : ELD (SCH 40 Dış dişli dirsekli) ELF ( PN:6 – PN:10 – PN:16 – ASA 150 lb st 37 ) ELK ( SCH 40 Kaynak ağızlı dirsek) U Flex Corrugation material Braiding material Connection type : AISI 316 Cr-Ni : AISI 304 Cr-Ni : ELD (SCH 40 external threaded bend) ELF (PN:6 – PN:10 – PN:16 – ASA 150 lb st 37) ELK (SCH 40 welded bend) Size DN (mm) ‘’D’’ (mm) ‘’A’’ (mm) ‘’B’’ (mm) ‘’C’’ (mm) 1/2" 12 26,9 215 290 3/4" 20 26,9 215 1’’ 25 33,7 1-1/4" 32 42,4 1-1/2" 40 2" 50 2-1/2" 65 3" 80 4" Pressure Connection Types 50 24 bar ELD - ELF - ELK 290 50 24 bar ELD - ELF - ELK 255 325 50 24 bar ELD - ELF - ELK 295 360 50 24 bar ELD - ELF - ELK 48,3 330 380 50 24 bar ELD - ELF - ELK 60,3 445 435 70 16 bar ELD - ELF - ELK 76,1 520 480 70 16 bar ELD - ELF - ELK 88,9 600 555 70 16 bar ELD - ELF - ELK 100 114,3 750 675 70 16 bar ELD - ELF - ELK 5" 125 139,7 965 835 100 16 bar ELD - ELF - ELK 6" 150 165 1115 930 100 16 bar ELD - ELF - ELK 8" 200 219,1 1420 1150 100 10 bar ELD - ELF - ELK 10" 250 273 1725 1330 100 10 bar ELD - ELF - ELK Bütün çaplarda (x,y,z) hareket miktarı 100 mm’dir. x,y,z movement is 100 mm www.eminteknik.com 55 j- Omega Flexler / Omega Flex V Flex Ondülasyon mal Örgü malzemesi Bağlantı şekli : AISI 316 Cr-Ni : AISI 304 Cr-Ni : ELD (SCH 40 Dış dişli dirsekli) ELF ( PN:6 – PN:10 – PN:16 – ASA 150 lb st 37 ) ELK ( SCH 40 Kaynak ağızlı dirsek) V Flex Corrugation material Braiding material Connection type : AISI 316 Cr-Ni : AISI 304 Cr-Ni : ELD (SCH 40 external threaded bend) ELF (PN:6 – PN:10 – PN:16 – ASA 150 lb st 37) ELK (SCH 40 welded bend) Size DN (mm) ‘’D’’ (mm) ‘’A’’ (mm) ‘’B’’ (mm) ‘’C’’ (mm) 2’’ 50 60,3 1160 470 2-1/2‘’ 65 76,1 1335 3’’ 80 88,9 1460 4" 100 114,3 5" 125 6" 150 8" 10" Pressure Connection Types 70 16 bar ELD - ELF - ELK 550 70 16 bar ELD - ELF - ELK 605 70 16 bar ELD - ELF - ELK 1590 665 70 16 bar ELD - ELF - ELK 139,7 1740 720 100 16 bar ELD - ELF - ELK 165 2030 850 100 16 bar ELD - ELF - ELK 200 219,1 2390 970 100 10 bar ELD - ELF - ELK 250 273 2620 1050 100 10 bar ELD - ELF - ELK Bütün çaplarda (x,y,z) hareket miktarı 100 mm’dir. x,y,z movement is 100 mm 56 www.eminteknik.com k- Kauçuk Kompansatörler / Rubber (Elastic) Expansion Joints Kauçuk (Lastik) Kompansatör Rubber (Elastic) Expansion Joints Kauçuk kompansatörler, boru sistemleri arasında gerilmeleri büyük ölçüde yok eden elastik ve yüksek dayanımlı parçalardır. Kauçuk esaslı malzemelerin elastik olma özelliğinden dolayı, her çeşit inşaat uygulamalarında ve pompa, fan, titreşimin olduğu mekanik elemanlarda rahatlıkla kullanılır. The rubber Expansion Joints are elastic and high strength parts that dissipate widely the tensions between the pipe systems. The elastic characteristic of the rubber based materials is usable easily in every kind of construction applications, pump, fan as well as mechanical elements subjected to vibrations. • Heating, ventilation and air-conditioning lines • Vessel ındustry • Hygienic systems • Pressurized lines, waste water lines • Pump and lift and force lines • Fire lines • Isıtma, havalandırma ve klima hatları • Gemi sanayisi • Hijyenik sistemler • Basınçlı hatlar, atık su hatları • Pompa ve emme basma hatları • Yangın hatları SIZE POZ NO ITEMS 1 1 Cord 1 2 Sreel Ring 1 3 Corrugated Rubber 2 4 Flange MATERIAL COMMENT Rubber AISI 304 for Vacuum AXIAL DILATATION 15 -20 Lateral Movement 15mm EPDM/NBR Sfero Casting or St37-2 Carbon Steel Angular movement www.eminteknik.com 10º 57 k- Kauçuk Kompansatörler / Rubber (Elastic) Expansion Joints Data Table Of Rubber (Elastic) Expansion Joints Kauçuk (Lastik)kompansatör Ölçü Tablosu DN 58 D K A M b mm mm mm mm mm 32 140 100 76 18 18 40 150 110 76 18 18 50 165 125 86 18 65 185 145 102 18 80 200 160 117 n L Pressure mm bar 4 100 PN:16 4 110 PN:16 18 4 130 PN:16 18 4 130 PN:16 20 20 8 130 PN:16 20 20 8 130 PN:16 100 220 180 141 125 250 210 167 22 22 8 130 PN:16 150 285 240 198 22 22 8 120 PN:16 200 340 295 254 24 24 12 120 PN:16 250 405 355 312 26 26 12 130 PN:16 300 460 410 375 26 26 12 210 PN:10 350 505 460 432 26 26 16 210 PN:10 16 220 PN:10 400 565 515 479 26 26 450 615 565 535 26 26 20 220 PN:10 500 670 620 585 28 28 20 270 PN:10 600 780 725 686 28 28 20 305 PN:10 700 895 840 790 28 28 24 300 PN:10 www.eminteknik.com l- Genleşme Hesabı / Expansion Calculation Genleşme Hesabı Expansion Calculation Boru çapı İşletme basıncı T max T min Boru uzunluğu Pipe diameter Operating pressure T max T min Pipe length : DN150 : PN10 : 150 °C Akışkanın maksimum sıcaklığı : -15 °C Akışkanın minimum sıcaklığı : 27 mt Extension Coefficient For Steel Pipes Çelik Borular İçin Uzama Katsayısı T (°C) α (mm/m.°C) 0-100 0,011 : DN150 : PN10 : 150 °C (maximum temperature of the fluid) : -15 °C (minimum temperature of the fluid) : 27 mt 100-200 0,012 Çelik borunun sıcaklığa bağlı uzama katsayısı: 0,012 ΔL = α.L.Δt ΔL = 0,012*27*165 = 53 mm uzama vardır. 200-300 0,013 300-400 0,0135 400-500 0,0139 The extension coefficient depending on the temperature of the steel pipe 0,012 ∆L = α.L.∆t ∆L = 0,012*27*165 = there is 53 mm extension. MONTAJ BİLGİLERİ MOUNTING DATA • Boru hattının özellikleri tespit edilir. • Sabit noktalar arasına bir adet kompansatör yerleştirilmelidir. • Sabit noktalar boru tesisatı istikametinde olmalıdır. • Kompansatör sabit noktaların (çap * 4) geçmeyecek şekilde montajlanmalıdır. • Birinci kayar mesnet kompansatörden 4 boru çapı mesafesine yerleştirilmelidir. • İkinci kayar mesnet birincisinden 14 boru çapı mesafesine yerleştirilmelidir. • The characteristics of the pipe line will be determined • One Expansion Joints will be installed between the stable points • The stable points will be at the direction of the pipe line. • The Expansion Joints will be at the direction of the pipe line. • The Expansion Joints will be mounted so as to not exceed the stable points (diameter *4) • The first sliding support will be installed at a distance of 4 pipe diameter from the Expansion Joints. • The second sliding support will be installed at a distance of 14 pipe diameter from the first one. www.eminteknik.com 59 m- Montaj Direktifleri / Mounting Instructions 60 Metal Kompansatör Montaj Talimatı Mounting Instructions of Metal Expansion Joints 1- İki sabit nokta arasına yalnız bir adet eksenel kompansatör montajı yapılmalıdır. 2- Boru hattındaki kayar mesnet ve sabit noktalar aşağıdaki şekilde düzenlenmelidir. Only one axial Expansion Joints will be mounted between two stable points. The sliding supports as well as the stable points in pipe lines will be arranged as following. 3- Kompansatörler ve boru hattı aynı eksende olmalıdır. The Expansion Joints and pipe line will be on the same exis. 4- Karşıt flanşlar boru eksenine dik olmalıdır. The Expansion Joints and pipe line will be on the same exis. 5- Kompansatörler “sıfır“ yük elemanıdır. İlave yükler taşımazlar. Özellikle sabit flanşlı Kompansatörlerin montajında; karşıt flanş deliklerinin, Kompansatör flanş cıvata deliklerine denk gelmesi sağlanmalıdır. Kompansatörün kesinlikle burulmaması, kısıntı yapmaması gerekir. The Expansion Joints are element of “zero” load. They do not carry additional load. Especially in the mounting of fixed flanged Expansion Joints; the holes of opposite flanges should coincide with the holes of Expansion Joints flange bolt. The Expansion Joints will not absolutely be twisted or curtailed. www.eminteknik.com m- Montaj Direktifleri / Mounting Instructions Metal Kompansatör Montaj Talimatı Mounting Instructions of Metal Expansion Joints 6- Kompansatöre “öngerme“ verilmelidir. Öngerme hesabı aşağıda verilmiş olup, pratik olarak toplam genleşme miktarının yarısı alınabilir. The Expansion Joints will not be subjected to “pretension”. The pretension calculation is given as following and in practice it can be taken as the half of the total expansion quantity. 7- Ondülasyonlar (körük kısmı) ince paslanmaz çelikten imal edildiğinden anahtar çekiç vs ekipmanların darbelerine maruz kalmamalıdır. As the corrugation is made of thin stainless steel, this part will be protected against shocks of equipments such as key, hammer etc… 8- Kaynak esnasında cürufların, ark kıvılcımların ondülasyonlara zarar vermesi engellenmelidir. Ondülasyon üzerinden ark alınmamalıdır. Kaynak sırasında ondülasyonlar koruyucu bir örtü ile korunmalıdır. During welding operations, it will be ensured to prevent the damage of corrugation that may be caused by slag, arc sparking. During the welding operations, the corrugations should be protected by a cover. 9- Laynerli (koruyucu kovan) Kompansatörlerin montajında akışkan yönüne dikkat edilmelidir. During the mounting of Expansion Joints with liners (protective sleeves), the direction of the www.eminteknik.com 61 m- Montaj Direktifleri / Mounting Instructions 62 Metal Kompansatör Montaj Talimatı Mounting Instructions of Metal Expansion Joints 10- Dıştan basınçlı Kompansatörlerde öngerme işlemi üzerinde yapıldığından ayrıca öngermeye ihtiyaç yoktur. Montaj sonrası; puntalanmış olan öngerme çubukları çekiç ile vurularak kırılmalıdır. As the pretension operation is performed on the external Pressurized Expansion Joints, an additional pretension will not be necessary. After the mounting, the spot-welded pretension rods will be broken by hitting them 11- Dekoratif tip tesisat kompansatöründe; Montaj esnasında kompansatör burulmamalı pim konumuna göre öngerme verilmelidir. During the mounting of installation Expansion Joints of decorative purpose will not be twisted and the preten sion will be given according to the pin position. 12- Boru hattındaki nominal basınç ve genleşme değerleri seçilen kompansatör limitlerinin dahilinde olmasına dikkat edilmelidir. It will be necessary to pay attention that the nominal pressure and expansion values in the pipe line are within the limit values of the selected Expansion Joints. www.eminteknik.com m- Montaj Direktifleri / Mounting Instructions Kauçuk (Lastik ) Kompansatör Montaj Talimatı Mounting Instructions of Rubber (Elastic) Expansion Joints 1- Emin teknik kauçuk kompansatörlerin ilave bir contaya ihtiyacı yoktur. The Emin Teknik rubber Expansion Joints will not need any additional joint. 2- Karşıt flanş iç çapının standarttan büyük ve köşeli olması durumunda lastik kesilmesi ortaya çıkacağı için karşıt flanşların sivri köşe yaratmamaları çok önemlidir. In case of the internal diameter of the opposite flange would be bigger than standard and angled, the opposite flanges should not create sharp corner as it will be necessary to cut the rubber. 3- Flanş civatalarını aşırı sıkmamak için şu sıra takip edilmelidir. Önce somunların boşluğu elle alınır, Civatalar karşılıklı olarak 50 Nm kadar ön sıkmaya tabi tutulur. Civatalar son olarak karşılıklı sıra ile 100 Nm değerine kadar sıkılır. Bu sıkma ile lastik basma yüzeyi 1,5-2mm kadar sıkışarak 16 bar sızdırmazlığı elde edilir. In order to not screw the flange bolts too much, the following order should be followed The clearance of nuts will be removed manually The bolts will be pre-screwed reciprocally at a range of 50 Nm And ultimately the bolts will be screwed reciprocally at a value of 100 Nm. Thanks to this operation, the surface of elastic compression will ensure a tightness of 16 bar by being pressed until 1,5-2mm 4- Montajda sivri uçlu aletler kullanılmamalı, kaynak yapılması halinde kaynak sıçramalarından ve ısısından korunmalıdır. The pointed tools should not be used during the mounting, in case of welding, the equipments should be protected against the welding spatter and temperature. 5- Montaj civataları kompansatör flanşı iç yüzeyinden çıkıntı yapmayacak şekilde seçilmelidir. Uzun civata çıkıntıları işletme deplasmanları sırasında lastiğe sürterek tahribat yaratabilir. The mounting screws should be selected so as they will not exceed from the internal surface of the compen sator flange. The protrusion of long screw may lead to destruction the rubber by scuffing it during the operat ing displacements. www.eminteknik.com 63 m- Montaj Direktifleri / Mounting Instructions Kauçuk (Lastik ) Kompansatör Montaj Talimatı Mounting Instructions of Rubber (Elastic) Expansion Joints 6- Kayar mesnetler kompansatöre ilave yük getirmeyecek şekilde yerleştirilmelidir. The sliding supports will be instaled so as to not bring additional load to Expansion Joints. 7- Eksenel ve yanal genleşme uygulaması basınç alma kuvvetleri için tedbir alınması şarttır. Aksi takdirde kompansatör aşağıdaki şekilde tahrip olur. It will be inevitable to take the necessary measures fort he axial and lateral expansion application pressure taking forces. Otherwise, the Expansion Joints may be damaged as indicated as following. 8- Pompa çıkışlarındaki açma kuvvetlerinin kompansatörü açmasına karşı gerekli tedbirler alınmalıdır. The necessary measures should be taken against the opening forces at the pump exit in order to not open the Expansion Joints. Bazı Özel Kompansatör Tipleri / Some Other Type of Expansion Joints 64 www.eminteknik.com 4- Demiryolu Ray Bağlantı Elemanları / Railway Fasteners www.eminteknik.com Emin Teknik ray bağlantı elemanları Emin Teknik rail fastener products Sıcak şekillendirme yöntemi ile ürettiğimiz ürünler arasında Amoung the products, which we produce with hot forming Ahşap Travers Tirfonları, Beton Travers Tirfonları ve daha method are; wooden railway sleeper-screws, concrete farklı bağlantı sistemlerinde kullanılan Bulon, T Cıvata vb. railway sleeper-screws and Bolts, T bolts etc., which are ürünler bulunmaktadır. 2009 yılı itibariyle imalatlarımız used for other connection systems. arasına yüksek hızlı tren ray sistemlerinde kullanılan travers tirfon üretimini de eklemiş bulunmaktayız. We have added as of the year 2009 railway sleeper-screws, used at high speed rail systems. Our current production Mevcut üretim kapasitemiz 20 milyon Adet/Yıl olup, capacity is 20 million pieces/year and it is our short ter maim kapasitemizi 40 milyon Adet/Yıl’a çıkarmak ve üretimimizi to increase the production up to 40 million pieces/year and yüksek standartlardaki diğer bağlantı parçalarıyla to diversify our production with other connecting parts of çeşitlendirmek, kısa vadeli hedeflerimiz içerisindedir. high quality. 66 www.eminteknik.com www.eminteknik.com 67 68 www.eminteknik.com www.eminteknik.com 69 Vidaların ve diğer ürünlerin kalitesine her zaman son derece önem veren kalite odaklı çalışan bir firmayız. İnsanların hayatları üzerinde oldukça etkileyici olan ürünler ürettiğimizden kullanımının güvenilir olması açısından kalitemizin devamlılığını sağlamaktayız. Zamanında teslimat ve rekabet edici fiyatlarımız müşterilerimizin bu ürünleri çok beğenmelerini sağlayan diğer unsurlardır. Emin Teknik, demiryolu sanayisi için 1. Sınıf bağlantı ekipmanları üreticisidir. Bağlantılı vidadan her çeşit civataya uzanan yaratıcı ürünleri ile Emin Teknik en iyi tedarikçiniz ve iş ortağınız olacaktır. 70 We are a quality driven company, always paying utmost importance to the quality of the screw sikes and other products. As we are manufacturing products that cast a major impact on people’s lives, we make certain to maintain their quality so that they are safe to use. Timely delivery and competitive prices are some other features that make these products a hit amongst our customers. Emin Teknik is the first class manufacturer of fasteners for the rail industry with innovative products such as the Spike Screws, to all types of Bolts, Emin Teknik is the one that will be your best supplier and partner. Teknik uzmanlığımız sayesinde özel problemlerinizi çözerek, We have an extensive technical expertise to solve the tüm uygulamalar için her tip malzemeden uygun bağlantı specific problems and producing the suitable fasteners with ekipmanlarının üretimini sağlamaktayız. all types of materials for all applications. www.eminteknik.com 5- Özel Dövme Ürünleri / Special Forging Products www.eminteknik.com Emin Teknik Çelik Dövme 2011 yılı itibarıyla ürün yelpazesini genişletmek ve farklı sektörlerden gelen müşterilerin sıcak çelik dövme ihtiyaçlarına cevap verebilmek amacıyla yeni makina ve teknoloji yatırımları yaparak otomotiv, demiryolları, enerji madencilik ve tarım gibi çeşitli söktörlere ürün tedarik edilen konuma gelmiş olup mevcut aylık dövme kapasitesini 2.000 tona çıkarmıştır. Firmamızın dövme ağırlığı parçaların şekline töleranslarına ve hassasiyetlerine bağlı olarak 0,1 kg ile 50 kg arasında değişmektedir. Dövme prosesi ile üretilmiş parçalar müşteri talepleri doğrultusunda talaşlı imalat prosesine tabi tutularak mamul ya da yarı mamul olarak sevk edilebilmektir. Emin Teknik Hot Steel Forging By making investments in new machinery and technology, with the aim of expanding its product range and meeting the hot steel forging needs of customers from different sectors, Emin Teknik can supply products to various industries, such as automotive, railways, energy, mining and agriculture and increased the existing forging capacity to 2000 tonnes per month, by the year 2011. Forging weight of our company is ranged from 0.1 kg to 50 kg depending on form, tolerances and sensitivities of the part. Parts produced by forging process are subject to machining process according to customer's demands and can be delivered as semi-finished or finished products. 72 www.eminteknik.com Çelik Dövme Üretim Tesisi Steel Forging Manufacturing Facility Yüksek ve ileri teknolojiye sahip makina parkımız ile üretim proseslerinin tüm aşamaları standart ve müşteri taleplerine uygun olarak gerçekleş tirikmektedir. All phases of the production processes are carried out in conformity with the standards and customer demands at our high-tech machine park. Dövme Bölümündeki Makina Parkı - Lasço 6300 KJ çekiç - 400 ton ile 1500 Ton arası friksiyon presler - 100 ton ile 300 Ton arası eksantrik presler - 100 ton ile 400 Ton arası hidrolik pres - 150 ile 250 Kg arası şahmerdanlar - 200 kw ile 800 KW arası indiksiyon fırınlar Forging equipments - Lasco 6300 KJ Forging Hammer - 400-1500 Tons friction presses - 100-300 Tons exantric presses - 100-400 Tons hydrolic presses - 150-250 Kg sledgehammers - 200-800 KW induction furnace www.eminteknik.com 73 Kalıphane Kalıphane Molding Room Dövme prosesinde kullandığımız kalıpların tamamı cad/cam programları kullanılarak bilgisayar desteğiyle CNC dik işleme merkezlerinde üretilmektedir. All the molds used in forging process are produced on CNC vertical machining centers by using CAD/CAM programs. CAD programı ile tasarımı yapılan kalıpların optimizasyonu için sonlu elemanlar metodu kullanılarak imalat öncesi proses simüle edilir ve muhtemel hatalar imalat öncesinde tespit edilerek yapılan düzetmeler maksimum verimli üretim sağlanmaktadır. 74 www.eminteknik.com For optimization of the molds designed with a CAD program, process is simulated prior to manufacturing using the finite elements method and by determining and correcting the possible errors prior to manufacturing, the maximum efficient production is provided. Otomotiv, Demiryolu, Madencilik ve Tasarım sektörüne imal ettiğimiz bazı parçalar. Some items we are producing for automative, railways and mining sectors. www.eminteknik.com 75 76 www.eminteknik.com IV. Kalite Kontrol ve Stok Alanları Quality Control and Stock Areas Üretimimizi ISO 9001 kalite belgesine sahip fabrikamızda, Our production performed in our factory which has the müşterilerimizin belirttiği çizim ve standartlara göre uzman certificate of quality ISO 9001 is realized through our mühendisler ve kalifiye elemanları ile gerçekleştirmekte expert engineers and qualified employees pursuant to olup, ürünleri laboratuvarımızda uygunluk testlerini the standards and drawings submitted by our customers. yaparak sevk ediyoruz. We dispatch the products after applying the compliance test in our laboratories. 78 www.eminteknik.com www.eminteknik.com 79 V. Teknik Bilgiler Technical Informations www.eminteknik.com Paslanmaz Malzeme Spektleri Stainless Steel Material Specifications 82 www.eminteknik.com www.eminteknik.com 83 Nominal çap (inç) Nominal Diameter inches 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 22" Dı çap (mm) External Diameterin mm 10.29 13.72 17.15 21.34 26.67 33.40 42.16 48.26 60.33 76.10 88.90 101.60 114.30 141.30 168.28 219.08 273.05 323.85 355.60 406.40 457.20 508.00 558.80 mm 1.65 1.65 1.65 1.65 1.65 1.65 2.11 2.11 2.11 2.11 2.77 2.77 2.77 3.40 3.96 3.98 4.19 4.19 4.77 4.77 5S Kg/mt 0.814 1.034 1.312 1.674 1.926 2.424 3.747 4.585 5.272 5.945 9.639 11.514 15.049 23.028 31.806 34.990 42.350 47.700 60.320 66.100 mm 1.24 1.65 1.65 2.11 2.11 2.77 2.77 2.77 2.77 3.05 3.05 3.05 3.05 3.40 3.40 3.76 4.19 4.57 4.78 4.78 4.78 5.53 5.53 10S Kg/mt 0.281 0.499 0.640 1.016 1.298 2.125 2.732 3.155 0.992 5.345 6.557 7.526 8.496 11.740 14.037 20.334 28.290 36.633 42.102 48.220 54.300 69.766 76.490 Kg/mt 0.371 0.644 0.858 1.260 1.680 2.500 3.380 4.050 5.430 8.620 1.280 13.560 16.060 21.760 28.230 42.490 60.240 73.760 81.210 93.130 105.500 116.970 128.890 SCH 40S mm 1.73 2.24 2.31 2.77 2.87 3.38 3.56 3.68 3.91 5.16 5.49 5.74 6.02 6.55 7.11 8.18 9.27 9.52 9.52 9.52 9.52 9.52 9.52 (kg/mt) Nominal thickness and weight/mt ANSI B 36.19’a göre nominal kalınlık ve ağırlıkları mm 2.41 3.02 3.20 3.73 3.91 4.55 4.85 5.08 5.54 7.01 7.62 8.08 8.56 9.52 10.97 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 Kg/mt 0.476 0.809 1.118 1.620 2.190 3.230 4.460 5.400 7.470 11.400 15.250 18.620 22.290 30.920 42.540 64.570 81.460 97.360 107.280 123.180 139.070 154.970 170.860 SCH 80S Kimyasal Dayanım Tablosu Chemical Resistance Table 84 1 2 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 1 1 1 1 3 2 1 1 1 1 2 2 2 3 3 3 2 1 2 1 1 1 1 1 1 1 3 1 2 2 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 2 2 2 3 3 2 1 1 2 1 1 1 1 1 1 1 3 1 2 1 1 1 1 1 1 1 1 2 2 1 1 2 1 3 2 1 3 1 1 1 1 1 1 3 1 1 2 1 1 1 1 2 2 2 3 3 3 3 1 2 1 1 1 1 1 1 1 3 1 3 2 1 1 1 1 1 2 1 2 1 1 1 2 3 2 3 2 2 3 3 1 2 1 1 1 1 3 2 1 1 2 3 1 2 2 3 2 3 1 2 2 1 3 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 2 3 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 www.eminteknik.com 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 3 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 1 1 1 1 1 1 1 2 1 2 1 1 1 1 1 SS 416 Durimet 1 3 3 3 1 1 1 3 1 3 3 3 3 3 3 1 2 1 3 3 1 2 3 2 1 3 1 2 3 1 3 3 3 3 1 3 1 1 1 2 3 1 1 3 2 3 2 2 1 1 1 Co base alloy 6 Bronze 2 2 1 1 1 SS 321 1 3 1 1 1 2 3 1 1 3 2 SS 316 1 3 3 3 1 1 1 3 1 3 1 4 3 3 3 1 2 1 3 3 1 2 3 2 1 3 1 2 3 1 3 3 3 SS 304 Acetaldehyde Acetic acid, air free Acetic acid, aerated Acetic acid, vapors Acetone Acetylene Alcohols Aluminum Sulfate Ammonia Ammonium chloride Ammonium Nitrate Ammonium Phosphate Ammonium Sulfate Ammonium Sulfite Aniline Asphalt Beer Benzene (benzol) Benzoic acid Boric acid Butane Calcium Chloride (alkaline) Calcium hypochlorite Carbolic acid Carbon dioxide, dry Carbon dioxide, wet Carbon disulfide Carbon tetrachloride Carbonic acid Chlorine gas Chlorine gas, wet Chlorine, liquid Chromic acid Citric acid Coke oven gas Copper sulfate Cottonseed oil Creosote Ethane Ether Ethyl chloride Ethylene Ethylene glycol Ferric chloride Formaldehyde Formic acid Freon wet Freon dry Furfural Gasoline Glucose Cast Iron Fluid 3- Uygun Değil (Unsuitable) 2- Normal Titanium 1- İyi (good) Carbon Steel Değerlendirme (Scala): 1 3 3 3 1 1 1 3 1 3 3 2 3 2 3 1 2 1 1 2 1 3 3 1 1 2 3 1 3 3 3 3 2 1 1 1 1 1 1 2 1 1 3 1 3 2 1 1 SS 316 SS 321 Bronze Durimet Titanium Co base alloy 6 SS 416 3 1 1 1 1 3 1 3 3 3 1 1 3 3 3 3 2 2 1 2 3 1 1 3 1 1 3 3 2 1 1 1 1 1 3 3 3 1 2 2 3 2 1 2 3 3 3 SS 304 3 3 2 1 1 Cast Iron Hydrochloric acid, aerated Hydrochloric acid, air free Hydrofluoric acid, aerated Hydrofluoric acid, air free Hydrogen Hydrogen peroxide Hydrogen sulfide, liquid Magnesium Hydroxide Mercury Methanol Methyl ethyl ketone Milk Natural gas Nitric acid Oleic acid Oxalic acid Oxygen Petroleum oils Phosphoric acid, aerated Phosphoric acid, air free Phosphoric acid vapors Picric acid Potassium chloride Potassium hydroxide Propane Rosin Silver Nitrate Sodium acetate Sodium carbonate Sodium chloride Sodium chromate Sodium hydroxide Sodium hypochloride Sodium thiosulfate Stannous chloride Stearic acid Sulfate liquor Sulfur Sulfur dioxide, dry Sulfur trioxide, dry Sulfuric acid, aerated Sulfuric acid, air free Sulfurous acid Tar Trichloroethylene Turpentine Vinegar Water, steam Water, distilled Water, sea W ine Zinc chloride Zinc sulfate Carbon Steel Fluid 3 3 3 3 1 1 3 1 1 1 1 3 1 3 3 3 1 1 3 3 3 3 2 2 1 2 3 1 1 3 1 1 3 3 2 3 1 1 1 1 3 3 3 1 2 2 3 3 1 2 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 2 1 2 1 1 3 1 3 1 1 1 1 1 3 3 2 1 2 1 1 1 1 2 1 3 1 3 3 2 2 1 1 1 1 1 1 1 1 1 2 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1 1 3 1 1 1 1 1 1 1 3 3 2 1 1 1 1 1 1 2 1 3 1 3 3 3 3 1 1 1 1 1 1 1 1 1 2 1 2 1 1 1 1 3 1 1 1 1 1 1 2 1 1 1 1 3 1 3 1 1 1 1 1 3 3 2 1 2 1 1 1 1 2 1 3 3 3 3 3 3 1 3 3 2 3 1 1 1 1 3 2 2 1 1 3 3 3 3 2 2 1 1 3 1 1 1 1 3 3 3 3 2 3 3 1 1 3 2 2 1 1 1 2 3 1 1 1 3 2 3 3 2 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 3 3 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 2 2 2 2 2 3 3 3 3 1 2 3 1 1 1 1 3 1 3 1 2 1 1 3 3 3 2 3 2 1 1 2 1 2 2 1 2 3 2 3 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 www.eminteknik.com 1 1 1 1 1 1 1 1 3 1 2 1 1 1 1 3 1 1 2 1 1 1 1 1 2 1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 2 1 1 2 2 3 3 3 1 2 1 3 2 2 3 3 3 2 85 Flexible Hotrum Montajlari İçin Minimum Uzunluğun Hesaplanmasi Calculation Of Minimum Hose Length For Flexible Hose Installations Aralık esneklik Intermittent Flexing Minimum tam uzunluk = L (Esneklik) + (2 x P) L- ‘’X’’ dirsek hareketine bağlı olarak aşağıdaki tabloda belirtilen ebat P-rakorların ebadı Statik esneklik Minimum Overall Length = L (Flexing) + (2 x P) L- Dimension from chart below relative to Offset Motion “X” P -Dimension of the fittings. Static Flexing Minimum tam uzunluk = L (Statik) + (2 x P) P -uç bağlantı rekorlarının ebadı Minimum Overall Length = L (Static) + (2 x P) P -Dimension of the end fittings. Düşey büküm (sabit nokta etraflarında maksimum hareket kabiliyeti) Düşey hareket kabiliyeti S = 1,2 π R + T/2 + 2P Vertical loop (Maksimum travel about fixed point) Vertical movement S = 1,2 π R + T/2 + 2P Düşey büklüm (kısa yatay hareket) Yatay hareket kabiliyeti S = 1,2 π(R + T/2) + 2P S- π R H= +R 2 Vertical loop (short horizontal travel) Horizontal movement S = 1,2 π(R + T/2) + 2P S- π R H= +R 2 S= Tam uzunluk R= Bükme yarı çapı (aşağıdaki tabloda belirtilen değerden düşük olmamalıdır) P= Uzunluk üzerine bağlantı rekorları ve demir halka H= Yükseklik π= 3,142 S= Overall length R= Bend radius which must not be less than minimum shown in table 1. P= Length over End Fitting & Ferrule H= Height π= 3,142 Önemli: Kıvrımlı döşemelerde, her iki bağlantı ve hareketlilik kıvrım ile aynı düzlemde olmalıdır. Important: In loop installations, both connections and travel should be in the same plane as the bend. LENGTH L’mm (FREE HOSE LENGTH) NOMINAL BORE 86 STATIC DIMENSION X mm (OFFSET MOTION) 0 15 25 35 6 100 150 175 85 140 180 215 10,12 90 150 190 225 290 20 95 170 220 255 310 25 105 185 240 280 335 425 32 110 205 260 305 365 450 40 140 250 320 370 440 530 610 50 170 300 380 440 520 630 730 800 870 940 65 200 340 430 500 590 80 215 380 500 580 680 720 380 920 1000 820 940 1040 1140 100 230 405 525 610 125 245 430 550 640 720 875 1005 1120 760 930 1070 1200 150 280 510 650 200 320 560 710 760 910 1100 1270 830 990 1210 1400 250 360 620 780 900 1070 1320 1510 www.eminteknik.com 50 75 100 200 225 250 1070 1130 1190 1230 1310 1380 1450 1225 1325 1415 1490 1560 1310 1420 1520 1590 1670 1420 1560 1690 1800 1900 1990 1560 1720 1860 1990 2100 2210 1690 1820 2010 2160 2290 2340 Açık Hatve Paralel Boğumlu Esnek Hortumlarda Basınç Kaybı* Pressure Loss of Wide Pitch Paralel Corrugation Flexible Hose* Esnek Metal Hortumlar sıvı, gaz hatta katı malzemelerin taşınmasında kullanılırlar. Hortum içinde taşınan malzemenin Basınç kaybına uğraması birçok parametreye bağlıdır. Bunlar yoğunluk, sıcaklık, viskozite, akma hızı, hortum iç çapı, hortuma bağlı iç yüzeyin direnç katsayısı gibi parametrelerdir. Corrugated Metal Flex Hoses are used by transporting of gases, liquids and also solid materials.The pressure loss of the material in the flex hose depands on several parameters.Those are density, heat, viscosity, flowing speed, the inside diameter etc... *Grafikler, açık hatve esnek hortumlarda birim boyda basınç kaybını yaklaşık olarak göstermektedir. Sıcaklık: 20°C - Akışkan: Su – Hortum: düz (Bükümsüz) *The graphics show the appr. pressure loss by open pitch flex hoses. Heat: 20 oC – Water – Hose: non inflective. www.eminteknik.com 87 İzinler Verilen Sapmalar Permissible Deviations Nominal uzunluk (NL) bağlantı rakoru ile hortumu ifade edip tüm uzunluğu tarif eder. Sipariş esnasında aksi durum belirtilmedikçe, aşağıda tabloda verilen uzunluk sapmaları, nominal uzunluğu belirlerken dikkate alınmalıdır. The nominal length (NL) relates to a hose provided with connection fittings and describes the overall length of the hose. Unless otherwise agreed when ordering, the following permissible length deviations should be taken into account when determining the nominal length. Daha küçük uzunluk toleransları mümkündür ancak sipariş esnasında özellikle karşılıklı onaylanmalıdır. Nominal lenght in mm Permissible length deviation up to 500 + 10 mm - 5 mm over 500 up to 1000 + 15 mm - 10 mm over 1000 + 1,5% - 1,0% Smaller lenght tolerances are possible but must be specifically agreed when ordering. Reduction factors for higher operating temperature Daha yüksek çalışma sıcaklıkları için uyarlama faktörü Bu kılavuzun tablolarında belirtilen metal hortumlar ve bağlantı rekorlarının tolerans değeri ve çalışma basınçları belirtilen ortam sıcaklıkları içindir. Uygulama daha düşük çalışma basınçlarında yapılmalıdır. The permissible operating pressures given for metal hoses and connection fittings in the tables of this manual apply to operating conditions at ambient tempratures, these operating pressures must be reduced. Bir çok durumda, metal hortum rekorları PED 97/23/EC’nin ilgili standardı ile EN14585 ve DN EN ISO 10380 gibi destekleyici standartlara uygun olarak tasarlanmıştır. Diğer paslanmaz çelikten malzemelerin daha yüksek çalışma sıcaklıkları için uyarlama faktörleri belirlenmiştir In many cases, metal hose assemblies must be of a design that conforms to PED 97/23/EC, the associated product standard EN 14585 as well as supporting standards such as DIN EN ISO 10380. Among other materials, the latter specifies reduction factors for stainless steels at higher operating temperatures. ISO 10380 sıtandardında redüksiyon faktörü belirtilmemiş olan metal hortumlar için, çalışma basıncındaki redüksiyon faktörü yüksek ısıdaki mukavemet düşüşüne göre hesaplanmış olup bu mukavemet değerleri üretici firma tarafından belirtilen değerler veya kendi malzeme testlerimizden elde edilen onaylanmış ölçümlerdir. For metal hose assemblies of which the reduction is not specified in ISO 10380, the reduction in operating pressure needs to be calculated by means of the fall in high temperature strength, the strength characteristic values being those specified by the material manufacturer or validated measurements from our own material tests. Aşağıdaki tabloda en sık kullanılan malzemeler için basınç redüksiyon faktörleri gösterilmektedir. Diğer malzemelerin mukavemet değeri Ek A’ da verilmektedir. The following table gives an overview of the respective pressure reduction factors for the most frequently used materials. Strength values for other materials can be found in Appendix A. Temperature ºC Parametreler 20 50 100 150 Material 88 200 250 300 350 400 450 500 550 Reduction factors 1,4306 1,00 0,89 0,72 0,64 0,58 0,54 0,50 0,48 0,46 0,44 0,43 0,43 1,4301 1,00 0,90 0,73 0,66 0,60 0,55 0,51 0,49 0,48 0,46 0,46 0,46 1,4541 1,00 0,93 0,83 0,78 0,74 0,70 0,66 0,64 0,62 0,60 0,59 0,58 1,4404 1,00 0,90 0,73 0,67 0,61 0,58 0,53 0,51 0,50 0,49 0,47 0,47 1,4435 1,00 0,90 0,73 0,67 0,61 0,58 0,53 0,51 0,50 0,49 0,47 0,47 1,4571 1,00 0,92 0,80 0,76 0,72 0,68 0,64 0,62 0,60 0,59 0,58 0,58 Bronze 1,00 0,95 0,90 0,80 0,75 0,70 www.eminteknik.com REKOR ÜRETİMİNDE KULLANILAN VİDA DİŞ TEKNİK ÖLÇÜLERİ Measurements Used For Fitting Threads METRİK VİDA DİŞ ÖLÇÜLERİ DIN 13 UNF / JIC VİDA DİŞ ÖLÇÜLERİ (Whitwort vida) DIN 11 BSP VİDA DİŞ ÖLÇÜLERİ (Whitwort boru vidası) DIN ISO 228 DİŞ ÖLÇÜSÜ DİŞ ÖLÇÜSÜ DİŞ ÖLÇÜSÜ Thread Dimension M12x1.5 M14x1.5 M16x1.5 M18x1.5 M20x1.5 M22x1.5 M24x1.5 M26x1.5 M30x1.5 M30x2 M33x1.5 M33x2 M36x1.5 M36x2 M38x1.5 M38x2 M42x1.5 M42x2 M45x1.5 M45x2 M48x1.5 M48x2 M52x1.5 M52x2 DİŞ DİBİ ø D mm DİŞ ÜSTÜ ø D mm 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 30.0 30.0 33.0 33.0 36.0 36.0 38.0 38.0 42.0 42.0 45.0 45.0 48.0 48.0 52.0 52.0 10.5 12.5 14.5 16.5 18.5 20.5 22.5 24.5 28.5 27.9 31.5 30.9 34.5 33.9 36.5 35.9 40.5 39.9 43.5 42.9 46.5 46.5 50.5 49.9 Thread Dimension 7/16’’-20 1/2’’-20 9/16’’-18 5/8’’-18 3/4’’-16 7/8’’-14 1’’5/16’’-12 1’’5/8’’-12 1’’7/8’’-12 2’’1/2’’-12 3’’-12 3’’1/2-12 DİŞ DİBİ DİŞ ÜSTÜ ø D mm ø D mm 11.07 12.70 14.25 15.85 19.00 22.17 33.30 41.22 47.22 63.45 76.20 88.90 10.00 11.60 13.00 14.70 17.60 20.50 31.30 39.20 39.20 61.50 74.30 87.00 Thread Dimension R 1/8’’-28 R 1/4’’-19 R 3/8’’-19 R 1/2’’-14 R 5/8’’-14 R 3/4’’-14 R 1’’-11 R 1’’-1/4-11 R 1’’-1/2-11 R 1’’-3/4-11 R 2’’-11 R 2’’-1/4-11 DİŞ DİBİ DİŞ ÜSTÜ ø D mm ø D mm 9.73 13.16 16.66 20.96 22.91 26.44 33.25 41.91 47.80 53.75 59.62 65.70 8.6 11.5 14.9 18.6 20.61 24.1 30.3 38.9 44.9 50.8 56.7 62.80 ORS VİDA DİŞ ÖLÇÜLERİ Thread Dimension 9/16’’-18 11/16’’-16 13/16’’-16 1’’-14 1’’3/16-12 1’’7/16-12 1’’11/16-12 2’’-12 DİŞ DİBİ DİŞ ÜSTÜ ø D mm ø D mm 14.25 17.46 20.60 25.40 30.16 36.51 42.86 50.80 13.00 15.70 18.60 23.10 27.50 33.80 40.20 48.10 www.eminteknik.com 89 Montaj Tipleri Uygun ve uygunsuz modeller aşağıdaki montaj çizelgesinde gösterilmiştir. 90 www.eminteknik.com Installation Types Correct and incorrect models are shown in the installation chart. NOTE: www.eminteknik.com 91
Benzer belgeler
ENDÜSTRİYEL ISITMALI HORTUMLAR
Metal hortum ve örgünün aynı malzemeden üretilmesi mümkünse de, korozyon önleyici ve ekonomik
nedenlerden dolayı farklı malzemeden de üretilirler. Örgü için genellikle AISI304 malzeme
kullanılmakta...