CV Prof. Dr. Mustafa ÜBEYLİ

CV
Prof. Dr. Mustafa ÜBEYLİ
Name : Mustafa ÜBEYLİ
Date of Birth: 1971
Place of Birth: BOR-NİĞDE
Degree
: Prof. Dr.
1.
2.
3.
Fields of Interest
Materials Science and Manufacturing: Powder Metallurgy, Heat Treatment, Steel Technology,
Composite Materials, Armor Materials, Structure-Property Relations, Machinability.
Nuclear Energy: Fusion-Fission (Hybrid) Reactors, Nuclear Waste Transmutation, Fission Reactors,
Neutronic Analysis of Nuclear Reactors, Nuclear Structural Materials, Heat Transfer.
4.
Education:
Degree
5.
1)
2)
3)
4)
5)
6.
6.1.
Field
B.Sc.
Metallurgical Engineering
M.Sc.
1. Ph.D.
Mechanical Engineering
Mechanical Technology
2. Ph.D.
Metallurgical and Materials
Engineering
Academic Carrier:
Research Assistant
Instructor
Assistant Professor
Associate Professor
Professor
University
Middle East Technical
University (METU) –
Ankara
Niğde University - Niğde
Gazi University – Ankara
Middle East Technical
University (METU) Ankara
Year
1994
1999
2004
2005
Gazi University
2000 - 2004
TOBB University of Economics and Technology 2004 - 2005
TOBB University of Economics and Technology 2005 - 2005
TOBB University of Economics and Technology 2005 – 2010
Osmaniye Korkut Ata University
2010 –
Thesis Supervised
M. Sc. Thesis
1) Teyfik DEMİR, “Investigation on the ballistic performance od metallic and laminated armor
materiasl against 7.62 mm AP projectiles”, Mechanical Engineering TOBB UET, 2008.
2) Caner Emre AKTAŞ, “Effect of cutting parameters on the machining performance of alumina
reinforced aluminum composites in milling operation” Mechanical Engineering, Gazi University
2008.
3) Hüseyin DENİZ, “Investigation of the ballistic behavior of a dual phase steel against 7.62 mm
armor piercing projectile” Mechanical Engineering, Gazi University, 2009.
4) Okan TOPÇU, “Investigation of the machninability of a dual phase steel and its estimation by
artificial neural networks”, Mechanical Engineering, TOBB UET, 2009.
5) M. Fatih AYCAN, “Influence of aging treatment on the mechanical properties of Al2O3 and SiC
reinforced aluminum alloy composites” Mechanical Engineering, TOBB UET, 2010.
6) M. Yusuf ÜNGÖR, “Investigation on the effect of martensite volume fraction on the fatigue of a
steel” Mechanical Engineering, TOBB UET 2010.
7) Bayram GÜREL, “Effect of martensite volume fraction and tempering treatment on the ballistic
behavior of a dual phase steel” Mechanical Engineering, TOBB UET 2010.
8) Demet KAYRETLİ, “Investigation on the effect of various martensite volüme fractions on the
corrosion behavior of a low-alloy steel by different methodologies”, Mechanical Engineering,
Selçuk University, 2013.
9) Bertan SARIKAN “Thje production and characterization of functionally gradient materials
bearing boron carbide” Mechanical Engineering, TOBB UET.
10) Emre Özer, Mechanical Engineering, Osmaniye Korkut Ata University (Ongoing)
11) Uğur Sağlam, Mechanical Engineering, Osmaniye Korkut Ata University (Ongoing)
12) Emin Çelik, Mechanical Engineering, Osmaniye Korkut Ata University (Ongoing)
13) Arif Cüreoğlu, Mechanical Engineering, Osmaniye Korkut Ata University (Ongoing)
14) Onur ALTUNTAŞ, Mechanical Engineering, Osmaniye Korkut Ata University (Ongoing)
15) Sinan ÖNDER, Mechanical Engineering, Osmaniye Korkut Ata University (Ongoing)
6.2.
Ph.D. Thesis
1. Demet KAYRETLİ, Mechanical Engineering, Osmaniye Korkut Ata University (Ongoing)
7.
PUBLICATIONS
7.1. INTERNATIONAL PAPERS (in the SCI Journals)
1) Übeyli M., Balcı E., Sarıkan B., et al., The ballistic performance of SiC-AA7075 functionally
graded composite produced by powder metallurgy, Materials & Design 56, 31-36, 2014.
2) Balcı E., Sarıkan B., Übeyli M., et al., On the ballistic performance of the AA7075 based
functionally graded material with boron carbide reinforcement, Kovove Materialy Metallic
Materials, 51, 257-262, 2013.
3) Sarıkan B., Balcı E., Übeyli M., et al., Investigation on the aging behviour of the functionally
gradient material consisting of boron carbide and and aluminum alloy, Materiali in Tehnologije
46, 393-397, 2012.
4) Turan E., Uslan İ., Übeyli M. Investigation on the rheological behavior of Al-Fe-V-Si/Alumina
composite powders, Kovove Materialy Metallic Materials, 50, 51-58, 2012.
5) Übeyli, M. A study on the damage of potential first wall materials in a nuclear fusion reactor
using plutonium bearing salt Kerntechnik 76, 341-346, 2011.
6) Übeyli M, Acır A, Keleş O, et al. Effect of cutting parameters on cutting force and surface
roughness in milling alumina reinforced Al-6Zn-2Mg-2Cu composites, Powder Metallurgy 54,
172-176, 2011.
7) Demir T, Übeyli M. A micro-damage investigation on a low-alloy steel tested using a 7.62-mm
AP projectile, Materiali in Tehnologije 45, 115-120, 2011.
8) Topçu O, Übeyli M, Acır A. Effect of the martensite volume fraction on the machining of a dual
phase steel using a milling operation, Materiali in Tehnologije 45, 145-150, 2011.
9) Übeyli M, Deniz H, Demir T, et al. Ballistic impact performance of an armor material consisting
of alumina and dual phase steel layers, Materials & Design 32, 1565-1570, 2011.
10) M. Übeyli, A. Acır, Neutronic investigation on the ARIES-ST fusion reactor with fissionable
molten salts, Energy Conversion and Management 51, 2531-2534, (2010).
11) B.S. Yılbaş, S. Khan, K. Raza, O. Keleş, M. Übeyli, T. Demir, M.S. Karakaş, Laser cutting of
7050 alloy reinforced with Al2O3 and B4C composites International Journal of Advanced
Manufacturing Technology 50, 185-193, (2010).
12) G. Özışık, N. Demir, M. Übeyli, H.Yapıcı, Hydrogen production via water splitting process in a
molten-salt fusion breeder, International Journal of Hydrogen Energy, 35, 7357-7368, (2010).
13) M. Übeyli, E.D. Übeyli, Using recurrent neural networks for estimation of minor actinides'
transmutation in a high power density fusion reactor Expert Systems with Applications 37,
2742-2746 (2010)
14) Acır, M. Übeyli, Effect of Using Thorium Molten Salts on the Neutronic Performance of
PACER, Journal of Fusion Energy 29, 113-118 (2010).
15) M. Übeyli, T. Demir, H. Deniz, R. O. Yıldırım, Ö. Keleş, Investigation on the ballistic
performance of a dual phase steel against 7.62 mm AP projectile, Materials Science and
Engineering A 527, 2036-2044 (2010).
16) O. Topçu, M. Übeyli, T. Demir, On the hardenability of an intercritically heat treated
microalloyed steel, Instrumentation Science and Technology 38, 178-186 (2010).
17) O. Topçu, M. Übeyli, On the microstructural and mechanical characterizations of a low carbon
and micro-alloyed steel, Materials & Design 30(8), 3274-3278 (2009).
18) M. Übeyli, Effect of Lithium Enrichment on the Tritium Breeding Characteristics of Various
Breeders in a Fusion Driven Hybrid Reactor, Journal of Fusion Energy 28(3), 300-303 (2009).
19) M. Übeyli, Effect of using various grades of plutonium in the protective liquid wall of an IFE
type fusion reactor Kerntechnik 74(1-2) 51-54 (2009).
20) E.D. Übeyli, M. Übeyli, Estimation of radiation damage at the structural materials of a hybrid
reactor by probabilistic neural networks, Expert Systems with Applications 36 (3) 5184-5189,
2009.
21) T. Demir, M. Übeyli, R. O. Yıldırım, Effect of hardness on the ballistic impact behavior of high
strength steels against 7.62 mm armor piercing projectiles Journal of Materials Engineering
and Performance 18(2) 145-153 (2009).
22) M. Übeyli, T. Demir, R.O. Yıldırım, M.F. Aycan, Effect of heat treatment on the formation of
adiabatic shear bands in high strength steels impacted by AP projectiles, Kovove Materialy Metallic Materials 47, 409-413 (2009).
23) T. Demir, M. Übeyli, R.O. Yıldırım, M.S. Karakaş, Response of Alumina/4340 steel laminated
composites against the impact of 7.62 mm armor piercing projectiles Science and Engineering
of Composite Materials 16(2) 89-98 (2009).
24) Acır, Y. Turgut, M. Übeyli, M. Günay, U. Şeker, A Study on the Cutting Force in Milling of
Boron Carbide Particle Reinforced Aluminum Composite, Sicence and Engineering of
Composite Materials 16, 187-195 (2009).
25) M. Übeyli Damage study for various materials at the first wall of a magnetic fusion reactor
using protective liquid wall Fusion Engineering and Design, 83, 1508-1511 (2008).
26) T. Demir, M. Übeyli, R.O. Yıldırım, Investigation on the ballistic impact behavior of various
alloys against 7.62 mm armor piercing projectile Materials & Design 29, 2009-2016 (2008).
27) S. Şahin, M. Übeyli, A review on the potential use of austenitic stainless steels in nuclear
fusion reactors Journal of Fusion Energy 27, 271-277 (2008).
28) M. Übeyli, E.D. Übeyli, Estimation of neutronic performance of a high power density hybrid
reactor by multilayer perceptron neural networks, Journal of Fusion Energy 27(4), 278-284
(2008)
29) M. Übeyli, A. Acır, Ş. Yalçın, A neutronic investigation on a helium cooled hybrid reactor using
nitride fuels containing reactor grade plutonium Applied Energy 85, 855-866 (2008).
30) M. Übeyli, A study on the neutronic performance of the ARIES-RS fusion reactor with various
coolants bearing nuclear fuel Kerntechnik 73, 207-211 (2008).
31) M. Übeyli, H. Yapıcı, Utilization of heavy metal molten salts in the ARIES-RS fusion reactor
Journal of Fusion Energy 27, 200-205, (2008).
32) M. Übeyli, Potential use of molten salts bearing plutonium fluorides in a magnetic fusion
energy reactor Annals of Nuclear Energy 35, 1087-1092 (2008).
33) M. Übeyli, Ş. Yalçın, Neutronic study on a magnetic fusion reactor using protective liquid wall
of thorium molten salts, Energy Conversion and Management
49 , 947-952 (2008).
34) M. Übeyli, R.O. Yıldırım, B. Ögel, Investigation on the ballistic behavior of Al 2O3/Al2024
laminated composites Journal of Materials Processing Technology 196 , 356-364 (2008).
35) M. Übeyli, T. Demir, Investigation on the radiation damage behavior of various alloys in a
fusion reactor using thorium molten salt Materials & Design 29 , 852-859 (2008).
36) M. Übeyli, A. Acır, M.S. Karakaş, B. Ögel Effect of feed rate on tool wear in milling of Al4%Cu/B4Cp composite, Materials and Manufacturing Processes 23, 865-870 (2008).
37) M. Übeyli, A. Acır, M.S. Karakaş, T. Demir, On the surface roughness Al-4%Cu/B4C metal
matrix composites machined by milling operation Science and Engineering of Composite
Materials 15, 131-139 (2008).
38) E.D. Übeyli, M. Übeyli, Investigating neutronic parameters of a thorium fusion breeder with
recurrent neural networks, Journal of Fusion Energy 26(4) 323-330, 2007.
39) M. Übeyli, Radiation Damage and tritium breeding study in a fusion reactor using a liquid wall
of various thorium molten salts Journal of Fusion Energy 26, 317-321 (2007).
40) Acır, M. Übeyli, Burning of reactor grade plutonium mixed with thorium in a hybrid reactor
Journal of Fusion Energy 26, 293-298 (2007).
41) M. Übeyli, A. Acır, M.S. Karakaş, B. Ögel, Study on Performance of Uncoated and Coated
Tools in Milling of Al-4%Cu/B4C Metal Matrix Composites Materials Science and Technology
23(8), 945-950 (2007).
42) M. Übeyli, A. Acır, Incineration of weapon grade plutonium in a (DT) fusion driven hybrid
reactor Kerntechnik 72, 27-32 (2007).
43) M. Übeyli, A. Acır, Utilization of thorium in a high power density hybrid reactor with innovative
coolants Energy Conversion and Management 48, 576-582 (2007).
44) M. Übeyli, R.O. Yıldırım, B. Ögel, On the comparison of the ballistic performance of steel and
laminated composite armors Materials& Design 28(4), 1257-1262 (2007).
45) M.Übeyli, Radiation damage on low activation materials used in a hybrid reactor, Materials &
Design 28 (5), 1453-1460, 2007.
46) M. Übeyli, On the radiation damage characterization of candidate first wall materials in a
fusion reactor using various molten salts Journal of Nuclear Materials 359 (3): 192-201 (2006).
47) M. Übeyli, Radiation Damage Study on Various First Wall Materials of a Magnetic Fusion
Reactor Using Heavy Metal Salt Kerntechnik 71 (5-6), 279-284 (2006).
48) M. Übeyli, Ş. Yalçın, Utilization of refractory metals and alloys in fusion reactor structures
Journal of Fusion Energy 25(3-4), 197-205 (2006).
49) M. Übeyli, Neutronic performance of HYLIFE-II fusion reactor using various thorium molten
salts, Annals of Nuclear Energy 33, 1417-1423 (2006).
50) M.S. Karakaş, A. Acır, M. Übeyli, B. Ögel, Effect of Cutting Speed on Tool Performance in
Milling of B 4C p Reinforced Aluminum Metal Matrix Composites Journal of Materials
Processing Technology 178(1-3), 241-246 (2006).
51) M. Übeyli, Investigation on the neutronic performance of a fusion reactor using flibe with heavy
metal fluorides Journal of Fusion Energy 25, 67-72 (2006).
52) H. Yapıcı, M. Übeyli, On the neutronic performance of HYLIFE-II reactor fuelled with carbide
fuels Journal of Fusion Energy 25, 87-97 (2006).
53) M. Übeyli, Impact of solid breeder materials on tritium breeding in a hybrid reactor Journal of
Fusion Energy 25, 99-106 (2006).
54) M. Übeyli, Neutronic analysis of ARIES-RS fusion reactor fueled with thorium Energy
Conversion and Management 47, 322-330 (2006).
55) M. Übeyli, Investigation on tritium breeding capability of solid-liquid breeders in a (DT) fusion
driven hybrid reactor Czechoslovak Journal of Physics 56, 170-175 (2006).
56) S. Şahin, M. Übeyli, Radiation damage studies on the first wall of a HYLIFE-II type fusion
breeder Energy Conversion and Management 46, 3185-3201 (2005).
57) M. Übeyli, R.O. Yıldırım, B. Ögel, On the drop weight testing of alumina/aluminum laminated
composites Sadhana 30(5), 673-686 (2005).
58) Ş.Yalçın, M. Übeyli, A. Acır, Neutronic analysis of a high power density hybrid reactor using
innovative coolants Sadhana 30(4), 585-600 (2005).
59) M. Übeyli, Transmutation of minor actinides discharged from LMFBR spent fuel in a high
power density fusion reactor, Energy Conversion and Management 45, 3219-3238 (2004).
60) M. Übeyli, Power flattening in ARIES-RS fusion breeder reactor using mixed fuels, Journal of
Fusion Energy,23(4), 263-269 (2004).
61) E. Tel, A. Aydın, M. Übeyli, İ. Demirkol, Investigation of the (n,2n) reaction cross sections of
some neighbouring nuclei with and without deformation, Indian Journal of Physics, 78 (11),
1229-1237 (2004).
62) M. Übeyli, Neutronic performance of new coolants in a fusion-fission (hybrid) reactor, Fusion
Engineering and Design 70(4), 319-328 (2004).
63) M. Übeyli, Reducing effective liquid wall thickness in a HYLIFE-II fusion breeder, Journal of
Fusion Energy 23(3), 183-189 (2004).
64) S. Şahin, M. Übeyli, Modified Apex reactor as a fusion breeder, Energy Conversion and
Management 45 (9-10), 1497-1512
(2004).
65) S. Şahin, M. Übeyli, LWR spent fuel transmutation in a high power density fusion reactor,
Annals of Nuclear Energy 31(8), 871-890 (2004).
66) M. Übeyli, Utilization of ceramic uranium fuels in ARIES-RS fusion reactor, Journal of Fusion
Energy 23(1), 41-48 (2004).
67) M. Übeyli, Radiation damage study on various structural refractory alloys of a multi-purpose
reactor, Journal of Fusion Energy 22 (4), 251-257 (2003).
68) M. Übeyli and E. Tel, Effect of different structural materials on neutronic performance of a
hybrid reactor, Journal of Fusion Energy 22 (4) 173-179 (2003).
69) S. Şahin, Ş. Yalçın, H. M. Şahin, M. Übeyli, Neutronics analysis of HYLIFE-II blanket for fissile
fuel breeding in an inertial fusion energy reactor, Annals of Nuclear Energy, 30(6), 669 – 683
(2003).
70) H.Yapıcı, O. İpek, M. Übeyli, Investigation of the performance parameters and temperature
distribution in fuel rod dependent on operation periods and first wall loads in fusion-fission
reactor system fueled with ThO2, Energy Conversion and Management, 44(4), 573-595
(2003).
71) M. Übeyli, On the tritium breeding capability of flibe, flinabe and Li20Sn80 in a fusion-fission
(hybrid) reactor, Journal of Fusion Energy 22 (1) 51-57 (2003).
72) H. Yapıcı, M.Übeyli, Power flattening in Prometheus breeder reactor using nuclear fuel and
waste actinide, Annals of Nuclear Energy,30(2), 159 – 173 (2003).
73) S. Şahin, H.M. Şahin, Ş.Yalçın, M. Übeyli, Neutronic investigation of a hybrid version of the
ARIES-RS fusion reactor, Annals of Nuclear Energy 30(2), 245-259 (2003) (Teknik Not).
74) H. Yapıcı, M. Übeyli, Ş. Yalçın, Neutronic analysis of Prometheus reactor fueled with various
compounds of thorium and uranium, Annals of Nuclear Energy,29 (16), 1871 – 1889 (2002).
Data by Web of Science:
Total number of citations for the papers: 548
h-index: 12
7.3. INTERNATIONAL CONFERENCE PROCEEDINGS
1) INVITED PAPER: Gürel B, Übeyli M. Tempering effect on the ballistic property of a high
strength low alloy steel with various martensite fractions, VI
th
International Metallurgical
Congress, 29.05.2014 – 01.06.2014, Ohrid-MACEDONIA
2) Özer E, Übeyli M. On the Impact Failure Mechanisms in an Armor Material Consisting of
Silicon Carbide and Tempered Steel Layers, 22nd International Conference on Materials
and Technology, 20-22 October 2014, Portoroz SLOVENIA.
3) Özer E, Übeyli M. A study on the impact resistance of laminated composites containing
silicon carbide and normalized steel layers, XVIII International Conference on Mechanics
of Composite Materials (MCM-2014), 02-06 June, 2014, Riga-LATVIA.
4) Übeyli M., Balcı E., Sarıkan B., et al., Production and Characterization of a Functionally
th
Graded Material Reinforced with Alumina, 18
International Conference on Mechanika
April 04-05, 2012, Kaunas Lithuania.
5) Balcı E, Sarıkan B, Übeyli M, Camuşçu N. Impact behavior of the multilayered
B4C/AA7075 functionally graded materials against armor piercing projectile, XVII.
International Conference on Mechanics of Composite Materials, May 28 – June 01, 2012,
Riga-Latvia.
6) Übeyli M, Balcı E, Sarıkan B, Camuşcu N, Yıldırım R.O. A comparison on the impact
resistance of Alumina/AA 7075 laminated composite and Alumina-AA 7075 graded
material, 4th International & 25th All India Manufacturing Technology, Design and
Research Conference, December 14-16, 2012 Kolkata-INDIA.
7) Sarıkan B, Öztaş M.K, Balcı E, Übeyli M, Camuşcu N, Keleş Ö. Effect of artificial aging on
the hardness of a functionally gradient material consisting of SiC and Aluminum 7075
alloy, 6th International Powder Metallurgy Conference, 5-9 October, 2011, Ankara
TURKEY.
8) Sarıkan B, Balcı E, Übeyli M, Camuşcu N. An investigation on the aging behavior of the
functionally gradient material consisting of boron carbide and aluminum alloy, 19th
Conference on Materials and Technology, 22-23 November 2011, Portoroz – SLOVENIA.
9) Demir, T., Übeyli, M., and Acar, E., "Optimization study on the aging treatment of B4C
reinforced AA7064 composites," Materials Science and Engineering Conference, 24-26
August 2010, Darmstadt, Germany,
10) Demir, T., Türeyen, K., Übeyli, M., Yetik, H., On the biomechanical comparison of drilled
and undrilled pedicle metallic bone screw, Materials Science and Engineering
Conference, 24-26 August 2010, Darmstadt, Germany,
11) M.F. Aycan, M. Übeyli, Investigation on the artificial aging behaviour of ceramic particle
reinforced aluminium matrix composites, pp. 128-129, Novel Aspects of Surfaces and
Materials (NASM3) 11-15 April 2010 Manchester, United Kingdom.
12) M. Übeyli, A. Acır, Neutronic performance of ARIES-ST fusion reactor using molten salts
containing fissile isotopes, p.99, International Conference, Nuclear Energy for New
Europe, 14-17 September 2009, Bled-Slovenia.
13) O. Topçu, M. Übeyli, Effect of intercritical heat treatment on mechanical properties of a
microalloyed steel, V. International Materials Symposium, MATERIAIS 2009, 5-8 April
2009, Lisbon Portugal.
14) M. Übeyli, Effect of using various grades of plutonium ın the protective liquid wall of an IFE
type fusion reactor, 25
th
Symposium on Fusion Technology, 15-19 September 2008,
Rostock, Germany.
15) M. Übeyli, A. Acır, S. Karakaş, T. Demir, Surface roughness investigations of milled B4C
reinforced aluminum metal matrix composites, 5th International Powder Metallurgy
Conference pp. 992-1001, October 08-12, 2008, Ankara TURKEY.
16) T. Demir, S. Sarıtaş, N. Durlu, M. Übeyli, Sedimentasyon ile toz boyutu ölçümleri, 5th
International Powder Metallurgy Conference pp. 22-37, October 08-12, 2008, Ankara
TURKEY.
17) T. Demir, S. Sarıtaş, M. Übeyli, N. Durlu, Biyel kolu üretiminde toz dövme yöntemi ile
geleneksel yöntemin karşılaştırılması, 5th International Powder Metallurgy Conference pp.
38-45, October 08-12, 2008, Ankara TURKEY.
18) M. Übeyli, Radiation damage on the first wall of an IFE type fusion reactor using weapon
grade plutonium isotopes, 7th International Topical Meeting on Industrial Radiation and
Radioisotope Measurement Application p.102, 22-27 June 2008, Prague Czech Republic.
19) T. Demir, M. Übeyli, R.O. Yıldırım, M.S. Karakaş, Investigation on the ballistic
performance of alumina/4340 steel laminated composite armor against 7.62 mm armor
piercing projectile, 17th International Metallurgical & Materials Conference, METAL 2008,
p.64, 13-15 May 2008, Hradec nad Moravici Czech Republic
20) M. Übeyli, Damage study for various materials at the first wall of a magnetic fusion
reactor, 8th International Symposium on Nuclear Fusion Technology September 30 –
October 5, 2007 Heidelberg Germany.
21) M. Übeyli, On the neutronic analysis of a fusion reactor with diferent thorium molten salts,
The Fourth Eurasian Conference on Nuclear Science and Its Applications, p.35, October
31 – November 3, 2006, Baku, Azerbaijan.
22) M. Übeyli, Investigation on tritium breeding capability of solid-liquid breeders in a (DT)
fusion driven hybrid reactor, 22nd Symposium on Plasma Physics and Technology, p.104105, 26-29 June, 2006 Praha, Czech Republic.
23) M. Übeyli, T. Demir, Radiation damage characterization for various structural materials in
a hybrid reactor, 13th International Metallurgy and Materials Congress, 9-11 November
2006, p.1543-1550, UCTEA Chamber of Metallurgical Engineers, Istanbul, TURKEY.
24) M. Übeyli, T. Demir, Austenitic stainless steels for fusion energy reactor applications 13th
International Metallurgy and Materials Congress, 9-11 November 2006, p.1551-1557,
UCTEA Chamber of Metallurgical Engineers, Istanbul, TURKEY
25) S. Şahin, M. Übeyli, Utilization of new coolants in a multi-functional reactor, 2005 ANS
Annual Meeting, 92, p.243-244, San Diego USA, June 5-9 2005.
26) S. Şahin, M. Übeyli, A. Acır, Fissile fuel breeding in ARIES-RS reactor, 2005 ANS Annual
Meeting, 92, p.264-265 San Diego USA, June 5-9 2005.
27) S. Şahin, M. Übeyli, Power flattening in ARIES-RS hybrid reactor, Transactions of the
American Nuclear Society 2005 Winter Meeting, 93, p.357-358, Washington USA,
November 13-17, 2005.
28) M. Übeyli, R.O. Yıldırım, B. Ögel, Al2O3/Al2024 katmanlı kompoziti ile 50CrV4 çeliğinin
balistik
performanslarının
karşılaştırılması, 12
th
International Metallurgy Materials
th
nd
Congress and Fair, p.721-726, İstanbul TURKEY, 28 September – 2 October 2005.
29) M. Übeyli, R.O. Yıldırım, B. Ögel, Investigation of low velocity impact behavior of
th
Al2O3/Al2024 laminated composites, 12 International Metallurgy-Materials Congress and
th
nd
Fair, p.784-790, İstanbul TURKEY, 28 September – 2 October 2005.
th
30) S. Şahin, M. Übeyli, T Altınok, Fissile fuel breeding in HYLIFE-II reactor, 12 International
Conference on Emerging Nuclear Energy Systems (ICENES’2005) Brussels, Belgium,
August 21–26, 2005.
31) S. Şahin, M. Übeyli, On the radiation damage behavior of refractory alloys in a hybrid
reactor
12th
International
Conference
on
Emerging
Nuclear
Energy
Systems
(ICENES’2005) Brussels, Belgium, August 21–26, 2005.
32) S. Şahin, M. Übeyli, T. Altınok, Transmutation of minor actinides in a high power density
fusion reactor, American Nuclear Society 2004 Winter Meeting, v.91, p.358-359,
Washington, USA, November 14-18, 2004
33) S. Şahin, M. Übeyli, T. Altınok, Tritium breeding potential of innovative coolants in a hybrid
reactor, American Nuclear Society 2004 Winter Meeting, 91, p.338-339, Washington,
USA, November 14-18, 2004
34) S. Şahin, M. Übeyli, H. M. Şahin, Fissile Fuel Breeding in a Modified Apex Reactor,
American Nuclear Society 2003 Winter Meeting, 89, p.240, New Orleans, USA, November
2003.
35) S. Şahin, Ş. Yalçın, H. M. Şahin, M. Übeyli, Fusion Breeder Option of Hylife-II Reactor,
American Nuclear Society 2003 Annual Meeting, 88, p.533-535, San Diego, California,
(June 1-5, 2003), USA.
36) S Şahin, H.M. Şahin, M. Übeyli, A Dual Purpose Fusion Reactor Concept with Swirling
Flowing Liquid Protective Wall Using Heavy Metal Molten Salt, Tenth International Topical
Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-10), Seoul, Korea (October 59, 2003).
37) S Şahin, H.M. Şahin, M. Übeyli, Reduction of Nuclear Heating in the Supermagnetic Coils
of Vista Space Craft, Tenth International Topical Meeting on Nuclear Reactor Thermal
Hydraulics (NURETH-10), Seoul, Korea (October 5-9, 2003).
38) M. Übeyli, Fissile Fuel Production in a Hybrid Model of Prometheus-H Reactor, 3.
Uluslararası İleri Teknolojiler Sempozyumu, 4, sayfa 1-12, 18-20 Ağustos, 2003, Gazi
Üniversitesi, Ankara.
39) M. Übeyli, M. Alkan, K. Yıldız, Füzyon Reaktörlerinde Yüksek Performans Sağlamak için
Yapı Malzemesi Olarak Refrakter Metallerin ve Alaşımların Kullanılması, 4, sayfa 58-68, 3.
Uluslararası İleri Teknolojiler Sempozyumu, 18-20 Ağustos, 2003, Gazi Üniversitesi,
Ankara.
40) M. Übeyli, B. Ögel, Yapı uygulamaları için fonksiyonel katmanlı malzemeler, 3
rd
International Powder Metallurgy Conference, September 4-8 2002, Gazi Üniversitesi
Ankara, p.1315-1321.
41) M. Übeyli. B. Ögel, Füzyon reaktörleri için düşük aktivasyonlu malzemeler, 11
th
International Metallurgy &Materials Congress, TMMOB Metalurji Mühendisleri Odası,
p.1043-1048, 5-8 Haziran 2002, İstanbul.
7.4. NATIONAL CONFERENCE PROCEEDINGS
1) A. Acır, M.S. Karakaş, M. Übeyli, B. Ögel, Metal matriksli kompozitlerin işlenmesinde kesici
takım kaplamasının aşınmaya etkisinin deneysel incelenmesi, TİMAK, Tasarım İmalat Analiz
Kongresi, sayfa:269-275, Balıkesir, 26-28 Nisan 2006.
2) M. Übeyli, T. Demir, Hava araçları için seramik zırh uygulamaları, Kayseri VI. Havacılık
Sempozyumu, HaSeM’06, sayfa:494-497, Nevşehir, 2-14 Mayıs 2006.
3) M. Übeyli, R.O.
Yıldırım, B.Ögel,
Alümina/AA2024-T6 katmanlı kompozitin balistik
davranışının deneysel ve sayısal incelenmesi, Zırh Teknolojileri Semineri, sayfa: 58-64, MSB
ARGE ve Tekno. D. Bşk.lığı, Ankara, 10-11 Mart 2005.
4) M. Übeyli, B. Ögel, O. Yıldırım, Katmanlama yapısının alumina/aluminyum katmanlı
kompozitlerinin balistik davranımı üzerine etkisi, SAVTEK 2004, Savunma Teknolojileri
Kongresi, sayfa:79-87, 24-25 Haziran 2004, ODTÜ, Ankara.
5) M. Übeyli, B. Ögel, Alumina/Aluminyum Katmanlı Kompozitlerin Balistik Performanslarının
İncelenmesi, SAVTEK 2002, Savunma Teknolojileri Kongresi, 45-51, 24-25 Ekim 2002,
ODTÜ, Ankara.
6) Sözen, H.M. Şahin, M. Übeyli, Nükleer Yakit Üretiminde Hızlandırıcı Kaynaklı Sistem ve
Füzyon-Fisyon (Hibrid) Sistemi, 1. Ulusal Parçacık Hızlandırıcıları ve Uygulamaları Kongresi,
25-26 Ekim 2001, Ankara.
7.5. Reviewer Activities for International Journals

Materials Science and Engineering A

Materials & Design

Materials Chemistry and Pyhsics

Materials Sciences and Applications

Advanced Powder Technology

Engineering Failure Analysis

Annals of Nuclear Energy

Journal of Fusion Energy

Fusion Engineering and Design

International Journal of Impact Engineering

Journal of Precision Engineering and Manufacturing

The Arabian Journal for Science and Engineering (AJSE B: Engineering)

Gazi Üniversitesi Mühendislik – Mimarlık Fakültesi Dergisi
7.6. Editorial Activities
th
1. 5 International Powder Metallurgy Conference (Editor)
th
2. 5 International Powder Metallurgy Conference (Steering Comittee Member)
3. VI. Aeronautical Symposium, (Steering Comittee Member), 2-14 May 2006, Nevşehir.
7.7. Book Chapter
1) Übeyli M, “Bitirme İşlemleri”, Toz Metalurjisi ve Parçacıklı Malzeme İşlemleri, Editors:S.
Sarıtaş, M. Türker, N. Durlu, TTMD, 2007.
7.8. Seminars
1. European Nuclear Research Center (CERN): Participating in neutron time of flight
experiments, Geneve – Switzerland, 06-31
August 2003.
2. Ballistic performance of various Materials, Obuda University (formerly known as Budapest
Tech) Budapest, Hungary 8-12 March 2010.
3. “Effect of heat treatment and martensite content on the fatigue behavior of a low alloy steel”,
Politechnika Opolska - Opole University of Technology Opole, Poland 22 -26 November
2010.
4. “An investigation on the impact response of potential armor Materials”, Politechnika Opolska
- Opole University of Technology Opole, Poland 22 -26 November 2010.
8.
Projects
Project No
Position
TÜBİTAK 110M034
Coordinator
OKÜ-BAP Project
Coordinator
TÜBİTAK 106M211
Researcher
United Nations
Development Program
(UNDP)
ODTÜ - BAP-2004-07-0200-114
Project Title
Investigation on the ballistic performance of functionally
gradient materials
Establishment of Materials and Energy Laboratories at
OKU
Investigation on the ballistic performance of metallic
armor materials
Researcher
Estimation of carbon dioxide gas emissions in Turkish
Iron and Steel Industry,
Researcher
Low velocity impact behavior of lightweight composite
armors, METU BAP Project
DPT-2003K120470-08
Researcher
ODTÜ BAP-2003-07-0200-79
Researcher
07/2003-14
Researcher
07/2003-15
Researcher
BAP-08-04DPT2002K120540-21
Researcher
9.
Utilization of thorium as nuclear fuel by using
conventional and advanced nuclear technologies, DPT
Project
Investigation of ballistic behavior of alumina/aluminum
composite armors, METU BAP Project
Nuclear fuel production by advanced nuclear
technologies, Gazi University BAP Project
Radiation shielding in fusion reactors, Gazi University
BAP Project
Ballistic testing of laminated composite materials, DPT
Project
Administrative Facilities
Administrative Position
Head of Institute
University
Institute of Natural and Applied Sciences at
Date
01/2012 – 02/2013
OKU
Head of Department
Member of Faculty
Mechanical Engineering at OKU
01/2011 - Present
Engineering Faculty at OKU
01/2011 - Present
Engineering Faculty at OKU
01/2011 - Present
Institute of Natural and Applied Sciences at
01/2011 - Present
Council
Member of Executive
Board of Faculty
Member of Institute
Council
OKU
Member of Executive
01/2011 - Present
Board of University
Vice Dean
OKU
Engineering Faculty at TOBB University of
2005 - 2009
Economics and Technology
Member of Faculty
Council
Head of Commission
Engineering Faculty at TOBB University of
Economics and Technology
Acreditation Comission at TOBB University
of Economics and Technology
10. Memberships to Scientific Establishments
1) TMMOB Chamber of Metallurgical Engineers
2) TURKISH Powder Metallurgy Association
2007 - 2010