inductive sensor
Transkript
inductive sensor
ñEdition: Hans Turck GmbH & Co.KG ñD-45472 Mülheim an der Ruhr ñWitzlebenstraße 7 ñTel. 0208 4952-0 ñFax 0208 4952-264 ñ[email protected] ñwww.turck.com inductive sensor Ni20U-EM30-AP6X M30 x 1,5 36/5 15 55 60 LED ñEdition: • 10.11.2006 4 Type Ident-No. Ni20U-EM30-AP6X 1646300 Rated operating distance Sn Mounting condition Assured switching distance Repetition accuracy Temperature drift Hysteresis ambient temperature 20 mm non-flush, partial embedding possible ð (0,81 x Sn) mm ð 2% ð ± 10 % ð ± 15 %, ð -25 °C v ï +70 °C 3... 15 % -30 ... + 85 °C Operating voltage Residual ripple 10... 30 V DC ð 10 % Uss DC rated operational current No-load current I0 ð 200 mA ð 15 mA Residual current Rated insulation voltage Short-circuit protection Voltage dip at Ie ð 0.1 mA ð 0.5 kV yes / cyclic ð 1.8 V Wire breakage / reverse polarity protection Output function Insulation class Switching frequency yes / complete 3-wire, normally open, pnp ÷ ð 1.5 kHz Housing style Dimensions Housing material Material active area End cap Housing nut tightening torque Connection cable quality Cable cross section: Vibration resistance Shock resistance Protection degree threaded barrel; M30 x 1,5 64 mm metal, A2 1.4301 (AISI 304) plastic, PBT plastic, EPTR 75 Nm cable Ø 5.2, LifYY, PVC, 2 m 3 x 0.34 mm2 55 Hz (1 mm) 30g (11 ms) IP68 Switch state display LED yellow ● threaded barrel, M30 x 1,5 ● stainless steel, 1.4301 ● factor 1 for all metals ● degree of protection IP68 ● magnetic field immune ● extended temperature range ● high switching frequency ● predamping protection through self-compensation ● 3-wire DC, 10..0.30 VDC ● normally open, pnp output ● cable connection Wiring diagram pnp BN + BU BK Function principle Inductive sensors are designed for wearfree and non-contact detection of metal objects. Due to a ferrite-less 3-coil system, uprox factor 1 sensors have distinct advantages. They detect all metals at the same switching distance, are magnetic field immune and feature large switching distances. Hans Turck GmbH & Co.KG ñD-45472 Mülheim an der Ruhr ñWitzlebenstraße 7 ñTel. 0208 4952-0 ñFax 0208 4952-264 ñ[email protected] ñwww.turck.com
Benzer belgeler
inductive sensor
quick-mount fixing clamp with dead-stop; material:
chrome-plated brass male thread M16 x 1. Note: The
switching distance of proximity switches can be
reduced by the use of quick mounting brackets.
Die Auslegersysteme.
Diesel-hydraulic by pump distribution gear with 6 axial piston variable displacement pumps with
capacity control within closed oil circuits.
Servo-control with electronic synchronizing device by tw...
Magnetic field sensor
Mounting condition
Assured switching distance
Repetition accuracy
Temperature drift
Hysteresis
ambient temperature